CNW136S

CNW136S Datasheet

CNW135 CNW136 CNW4502

Part	Datasheet
CNW136S	CNW136S (pdf)

Related Parts	Information
CNW4502300	CNW4502300
CNW4502S	CNW4502S
CNW136	CNW136
CNW135S	CNW135S
CNW135	CNW135
CNW4502	CNW4502
CNW135300	CNW135300
CNW136300	CNW136300

PDF Datasheet Preview
8-PIN WIDE BODY, HIGH-SPEED OPTOCOUPLERS CNW135 CNW136 CNW4502 The CNW135, CNW136 and CNW4502 are fast-switching optocouplers, consisting of an AlGaAs LED optically coupled to a high speed photodetector transistor in a wide 8-pin dual-in-line DIL plastic envelope. The CNW4502 provides the same electrical switching and isolation performances as the CNW136, and increased ESD protection due to a non-connected base. • Wide body DIL encapsulation, with a pin distance of mm • Minimum clearance of mm and minimum creepage of 10 mm • 11 MHz bandwidth • Short propagation delay times • TTL compatible • Low saturation voltage • High transient immunity • High degree of AC and DC insulation 5000 V RMS and 7070 V DC in accordance with UL 1577 and IEC/BSI specifications • Maximum permissible voltage of 8000 V peak and maximum operating isolation voltage of 1000 V RMS in accordance with VDE 00884 • UL recognize File #E90700 N/C 1 V F _3 N/C 4 5 GND Pin 7 is not connected in Part Number CNW4502 • Video signal isolation • Feedback element in SMPS • Line receivers • High-speed logic ground isolation • Analog signal ground isolation • Replace pulse transformers ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Parameters Device TOTAL DEVICE Storage Temperature TSTG TOPR TSOL Continuous Forward Current Forward Current - Peak tp = 1 µs, f = 300 Hz IF pk Total Power Dissipation up to 70°C Ambient DETECTOR DC Collector Current Supply Voltage pins 8 & 5 Collector to Emitter Voltage pins 6 & 5 Emitter to Base Voltage pins 7 & 5 Total Power Dissipation up to 70°C VCC VCEO VEBO All CNW135, CNW136 All Value -55 to +150 -55 to +85 260 for 10 sec ORDERING INFORMATION CNW135 CNW136 CNW4502 Option S 300 Order Entry Identifier Surface Mount Lead Bend VDE 0884 8 OF 9 8/06/01 DS300399 8-PIN WIDE BODY, HIGH-SPEED OPTOCOUPLERS CNW135 CNW136 CNW4502 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices or systems which, a are intended for surgical implant into the body,or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. DS300399 8/06/01 9 OF 9

PDF Datasheet Preview

8-PIN WIDE BODY, HIGH-SPEED OPTOCOUPLERS

CNW135 CNW136 CNW4502

The CNW135, CNW136 and CNW4502 are fast-switching optocouplers, consisting of an AlGaAs LED optically coupled to a high speed photodetector transistor in a wide 8-pin dual-in-line DIL plastic envelope.

The CNW4502 provides the same electrical switching and isolation performances as the CNW136, and increased ESD protection due to a non-connected base.
• Wide body DIL encapsulation, with a pin distance of mm
• Minimum clearance of mm and minimum creepage of 10 mm
• 11 MHz bandwidth
• Short propagation delay times
• TTL compatible
• Low saturation voltage
• High transient immunity
• High degree of AC and DC insulation 5000 V RMS and 7070 V

DC in accordance with UL 1577 and IEC/BSI specifications
• Maximum permissible voltage of 8000 V peak and maximum
operating isolation voltage of 1000 V RMS in accordance with

VDE 00884
• UL recognize File #E90700

N/C 1

V F _3

N/C 4
5 GND

Pin 7 is not connected in Part Number CNW4502
• Video signal isolation
• Feedback element in SMPS
• Line receivers
• High-speed logic ground isolation
• Analog signal ground isolation
• Replace pulse transformers

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Parameters

Device

TOTAL DEVICE Storage Temperature

TSTG

TOPR

TSOL

Continuous Forward Current

Forward Current - Peak tp = 1 µs, f = 300 Hz

IF pk

Total Power Dissipation up to 70°C Ambient

DETECTOR DC Collector Current

Supply Voltage pins 8 & 5 Collector to Emitter Voltage pins 6 & 5 Emitter to Base Voltage pins 7 & 5 Total Power Dissipation up to 70°C

VCC VCEO VEBO

All CNW135, CNW136 All

Value
-55 to +150
-55 to +85 260 for 10 sec
ORDERING INFORMATION

CNW135 CNW136 CNW4502

Option

S 300

Order Entry Identifier

Surface Mount Lead Bend VDE 0884
8 OF 9
8/06/01 DS300399
8-PIN WIDE BODY, HIGH-SPEED OPTOCOUPLERS

CNW135 CNW136 CNW4502

DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

Life support devices or systems are devices or systems which, a are intended for surgical implant into the body,or b support or sustain life, and c whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user.

A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

DS300399 8/06/01
9 OF 9

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CNW136S Datasheet file may be downloaded here without warranties.

Datasheet ID: CNW136S 513594