CD4093BCM

CD4093BCM Datasheet

CD4093BC Quad 2-Input NAND Schmitt Trigger

Part	Datasheet
CD4093BCM	CD4093BCM (pdf)

Related Parts	Information
CD4093BCMX	CD4093BCMX
CD4093BCN	CD4093BCN

PDF Datasheet Preview
CD4093BC Quad 2-Input NAND Schmitt Trigger CD4093BC Quad 2-Input NAND Schmitt Trigger The CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a 2-input NAND gate with Schmitttrigger action on both inputs. The gate switches at different points for positive and negative-going signals. The difference between the positive VT+ and the negative voltage VT− is defined as hysteresis voltage VH . All outputs have equal source and sink currents and conform to standard B-series output drive see Static Electrical Characteristics . s Wide supply voltage range 3.0V to 15V s Schmitt-trigger on each input with no external components s Noise immunity greater than 50% s Equal source and sink currents s No limit on input rise and fall time s Standard B-series output drive s Hysteresis voltage any input TA = 25°C Typical VDD = 5.0V VH = 1.5V VDD = 10V VH = 2.2V VDD = 15V VH = 2.7V Guaranteed VH = VDD • Wave and pulse shapers • High-noise-environment systems • Monostable multivibrators • Astable multivibrators • NAND logic Ordering Code: Order Number Package Number Package Description CD4093BCM M14A 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow CD4093BCN N14A 14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Top View 2002 Fairchild Semiconductor Corporation DS005982 CD4093BC Absolute Maximum Ratings Note 1 Note 2 DC Supply Voltage VDD Input Voltage VIN Storage Temperature Range TS Power Dissipation PD Dual-In-Line Small Outline Lead Temperature TL Soldering, 10 seconds to +18 VDC to VDD VDC −65°C to +150°C 700 mW 500 mW 260°C Recommended Operating Conditions Note 2 DC Supply Voltage VDD 3 to 15 VDC Input Voltage VIN 0 to VDD VDC Operating Temperature Range TA −55°C to +125°C Note 1 “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides conditions for actual device operation. Note 2 VSS = 0V unless otherwise specified. DC Electrical Characteristics Note 2 Parameter Conditions Quiescent Device VDD = 5V Current VDD = 10V VDD = 15V LOW Level VIN = VDD, \|IO\| < 1 µA Output Voltage VDD = 5V VDD = 10V VDD = 15V HIGH Level VIN = VSS, \|IO\| < 1 µA Output Voltage VDD = 5V

PDF Datasheet Preview

CD4093BC Quad 2-Input NAND Schmitt Trigger

CD4093BC Quad 2-Input NAND Schmitt Trigger

The CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a 2-input NAND gate with Schmitttrigger action on both inputs. The gate switches at different points for positive and negative-going signals. The difference between the positive VT+ and the negative voltage VT− is defined as hysteresis voltage VH .

All outputs have equal source and sink currents and conform to standard B-series output drive see Static Electrical Characteristics .
s Wide supply voltage range 3.0V to 15V s Schmitt-trigger on each input
with no external components s Noise immunity greater than 50% s Equal source and sink currents s No limit on input rise and fall time s Standard B-series output drive s Hysteresis voltage any input TA = 25°C

Typical

VDD = 5.0V VH = 1.5V

VDD = 10V VH = 2.2V

VDD = 15V VH = 2.7V

Guaranteed

VH = VDD
• Wave and pulse shapers
• High-noise-environment systems
• Monostable multivibrators
• Astable multivibrators
• NAND logic
Ordering Code:

Order Number Package Number

Package Description

CD4093BCM

M14A
14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow

CD4093BCN

N14A
14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram

Top View 2002 Fairchild Semiconductor Corporation DS005982

CD4093BC

Absolute Maximum Ratings Note 1

Note 2

DC Supply Voltage VDD Input Voltage VIN Storage Temperature Range TS Power Dissipation PD

Dual-In-Line

Small Outline

Lead Temperature TL Soldering, 10 seconds
to +18 VDC to VDD VDC
−65°C to +150°C
700 mW 500 mW
260°C

Recommended Operating Conditions Note 2

DC Supply Voltage VDD
3 to 15 VDC

Input Voltage VIN
0 to VDD VDC

Operating Temperature Range TA
−55°C to +125°C

Note 1 “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides conditions for actual device operation.

Note 2 VSS = 0V unless otherwise specified.

DC Electrical Characteristics Note 2

Parameter

Conditions

Quiescent Device

VDD = 5V

Current

VDD = 10V

VDD = 15V

LOW Level

VIN = VDD, |IO| < 1 µA

Output Voltage

VDD = 5V

VDD = 10V

VDD = 15V

HIGH Level

VIN = VSS, |IO| < 1 µA

Output Voltage

VDD = 5V

More datasheets: B82469G1682M | B82466G561M | B82469G1391M | B82469G1472M | B82469G1102M | B82469G1103M | B82469G1222M | B82469G1223M | T0052702999N | CY8CKIT-012

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CD4093BCM Datasheet file may be downloaded here without warranties.

Datasheet ID: CD4093BCM 513578