CD4050BCM

CD4050BCM Datasheet


CD4049UBC<br>• CD4050BC Hex Inverting Buffer<br>• Hex Non-Inverting Buffer

Part Datasheet
CD4050BCM CD4050BCM CD4050BCM (pdf)
Related Parts Information
CD4049UBCN CD4049UBCN CD4049UBCN
CD4050BCMX CD4050BCMX CD4050BCMX
CD4050BCN CD4050BCN CD4050BCN
CD4049UBCM CD4049UBCM CD4049UBCM
CD4049UBCMX CD4049UBCMX CD4049UBCMX
PDF Datasheet Preview
CD4049UBC
• CD4050BC Hex Inverting Buffer
• Hex Non-Inverting Buffer

CD4049UBC
• CD4050BC Hex Inverting Buffer
• Hex Non-Inverting Buffer

The CD4049UBC and CD4050BC hex buffers are monolithic complementary MOS CMOS integrated circuits constructed with N- and P-channel enhancement mode transistors. These devices feature logic level conversion using only one supply voltage VDD . The input signal high level VIH can exceed the VDD supply voltage when these devices are used for logic level conversions. These devices are intended for use as hex buffers, CMOS to DTL/ TTL converters, or as CMOS current drivers, and at VDD = 5.0V, they can drive directly two DTL/TTL loads over the full operating temperature range.
s Wide supply voltage range 3.0V to 15V s Direct drive to 2 TTL loads at 5.0V over full temperature
range s High source and sink current capability s Special input protection permits input voltages greater
than VDD
• CMOS hex inverter/buffer
• CMOS to DTL/TTL hex converter
• CMOS current “sink” or “source” driver
• CMOS HIGH-to-LOW logic level converter
Ordering Code:

Order Number Package Number

Package Description

CD4049UBCM

M16A
16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow

CD4049UBCN

N16E
16-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide

CD4050BCM

M16A
16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow

CD4050BCN

N16E
16-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagrams

Pin Assignments for DIP

CD4049UBC

CD4050BC

Top View 2002 Fairchild Semiconductor Corporation DS005971

Top View

CD4049UBC
• CD4050BC

Schematic Diagrams

CD4049UBC 1 of 6 Identical Units

CD4050BC 1 of 6 Identical Units

CD4049UBC
• CD4050BC

Absolute Maximum Ratings Note 1

Note 2

Supply Voltage VDD Input Voltage VIN Voltage at Any Output Pin VOUT Storage Temperature Range TS Power Dissipation PD

Dual-In-Line

Small Outline

Lead Temperature TL Soldering, 10 seconds
−0.5V to +18V −0.5V to +18V −0.5V to VDD + 0.5V −65°C to +150°C
700 mW 500 mW
260°C

Recommended Operating Conditions Note 2

Supply Voltage VDD Input Voltage VIN Voltage at Any Output Pin VOUT Operating Temperature Range TA

CD4049UBC, CD4050BC
3V to 15V 0V to 15V
0 to VDD
−55°C to +125°C

Note 1 “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides conditions for actual device operation.

Note 2 VSS = 0V unless otherwise specified.

DC Electrical Characteristics Note 3

Parameter

Quiescent Device Current

LOW Level Output Voltage

HIGH Level Output Voltage

LOW Level Input Voltage

CD4050BC Only

LOW Level Input Voltage

CD4049UBC Only

HIGH Level Input Voltage

CD4050BC Only

HIGH Level Input Voltage
More datasheets: 89750109 | 89750103 | 88950100 | ADNS-7010 | 10133 | B39421B3552U310 | CD4049UBCN | CD4050BCMX | CD4050BCN | CD4049UBCM


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CD4050BCM Datasheet file may be downloaded here without warranties.

Datasheet ID: CD4050BCM 513571