74LVQ14 Low Voltage Hex Inverter with Schmitt Trigger Input
Part | Datasheet |
---|---|
![]() |
74LVQ14SJX (pdf) |
Related Parts | Information |
---|---|
![]() |
74LVQ14SCX |
![]() |
74LVQ14SJ |
![]() |
74LVQ14SC |
PDF Datasheet Preview |
---|
74LVQ14 Low Voltage Hex Inverter with Schmitt Trigger Input 74LVQ14 Low Voltage Hex Inverter with Schmitt Trigger Input The LVQ14 contains six inverter gates each with a Schmitt trigger input. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, they have a greater noise margin than conventional inverters. The LVQ14 has hysteresis between the positive-going and negative-going input thresholds typically 1.0V which is determined internally by transistor ratios and is essentially insensitive to temperature and supply voltage variations. s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into Ordering Code: Order Number Package Number Package Description 74LVQ14SC M14A 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 74LVQ14SJ M14D 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names In On Description Inputs Outputs Truth Table Input H = HIGH Voltage Level L = LOW Voltage Level Output O H L 2001 Fairchild Semiconductor Corporation DS011345 74LVQ14 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Diode Current IIK VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source or Sink Current IO DC VCC or Ground Current ICC or IGND Storage Temperature TSTG DC Latch-Up Source or Sink Current −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA ±200 mA −65°C to +150°C ±100 mA Recommended Operating Conditions Note 2 Supply Voltage VCC LVQ 2.0V to 3.6V Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate 0V to VCC 0V to VCC −40°C to +85°C VIN from 0.8V to 2.0V VCC 3.0V 125 mV/ns Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Parameter TA = +25°C TA = −40°C to +85°C Units |
More datasheets: RTAP2DS13M25NS | RTAP2DW16M25NP | 31-1/B4C-AKNB | 17-101764 | 17-101754 | WTD2600 | 74ABT541CPC | 93091-80025L | 74LVQ14SCX | 74LVQ14SJ |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74LVQ14SJX Datasheet file may be downloaded here without warranties.