74LVQ125SJ

74LVQ125SJ Datasheet

74LVQ125 Low Voltage Quad Buffer with 3-STATE Outputs

Part	Datasheet
74LVQ125SJ	74LVQ125SJ (pdf)

Related Parts	Information
74LVQ125SC	74LVQ125SC
74LVQ125SCX	74LVQ125SCX
74LVQ125SJX	74LVQ125SJX

PDF Datasheet Preview
74LVQ125 Low Voltage Quad Buffer with 3-STATE Outputs 74LVQ125 Low Voltage Quad Buffer with 3-STATE Outputs The LVQ125 contains four independent non-inverting buffers with 3-STATE outputs. s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into Ordering Code: Order Number 74LVQ125SC Package Number Package Description M14A 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 74LVQ125SJ M14D 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names An, Bn On Description Inputs Outputs Truth Table Inputs H = HIGH Voltage Level L = LOW Voltage Level Z = HIGH Impedance X = Immaterial Output On L H Z 2001 Fairchild Semiconductor Corporation DS011349 74LVQ125 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Diode Current IIK VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source or Sink Current IO DC VCC or Ground Current ICC or IGND Storage Temperature TSTG DC Latch-Up Source or Sink Current −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA ±200 mA −65°C to +150°C ±100 mA Recommended Operating Conditions Note 2 Supply Voltage VCC Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate VIN from 0.8V to 2.0V VCC 3.0V 2.0V to 3.6V 0V to VCC 0V to VCC −40°C to +85°C 125 mV/ns Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Parameter TA = +25°C TA = −40°C to +85° C Units Guaranteed Limits Conditions

PDF Datasheet Preview

74LVQ125 Low Voltage Quad Buffer with 3-STATE Outputs
74LVQ125 Low Voltage Quad Buffer with 3-STATE Outputs

The LVQ125 contains four independent non-inverting buffers with 3-STATE outputs.
s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and
dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into
Ordering Code:

Order Number 74LVQ125SC

Package Number

Package Description

M14A
14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow
74LVQ125SJ

M14D
14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.

Logic Symbol

Connection Diagram

IEEE/IEC

Pin Descriptions

Pin Names An, Bn On

Description Inputs Outputs

Truth Table

Inputs

H = HIGH Voltage Level L = LOW Voltage Level Z = HIGH Impedance X = Immaterial

Output

On L H Z
2001 Fairchild Semiconductor Corporation DS011349
74LVQ125

Absolute Maximum Ratings Note 1

Supply Voltage VCC DC Input Diode Current IIK

VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source
or Sink Current IO DC VCC or Ground Current

ICC or IGND Storage Temperature TSTG DC Latch-Up Source or

Sink Current
−0.5V to +7.0V
−20 mA +20 mA −0.5V to VCC + 0.5V
−20 mA +20 mA −0.5V to VCC + 0.5V
±50 mA
±200 mA −65°C to +150°C
±100 mA

Recommended Operating Conditions Note 2

Supply Voltage VCC Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate

VIN from 0.8V to 2.0V VCC 3.0V
2.0V to 3.6V 0V to VCC 0V to VCC
−40°C to +85°C
125 mV/ns

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 Unused inputs must be held HIGH or LOW. They may not float.

DC Electrical Characteristics

Parameter

TA = +25°C

TA = −40°C to +85° C

Units

Guaranteed Limits

Conditions

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74LVQ125SJ Datasheet file may be downloaded here without warranties.

Datasheet ID: 74LVQ125SJ 513400