74ACT16240 16-Bit Inverting Buffer/Line Driver with 3-STATE Outputs
Part | Datasheet |
---|---|
![]() |
74ACT16240MTD (pdf) |
Related Parts | Information |
---|---|
![]() |
74ACT16240MTDX |
![]() |
74ACT16240SSCX |
![]() |
74ACT16240SSC |
PDF Datasheet Preview |
---|
74ACT16240 16-Bit Inverting Buffer/Line Driver with 3-STATE Outputs 74ACT16240 16-Bit Inverting Buffer/Line Driver with 3-STATE Outputs The ACT16240 contains sixteen inverting buffers with 3STATE outputs designed to be employed as a memory and address driver, clock driver, or bus-oriented transmitter/ receiver. The device is nibble controlled. Each nibble has separate 3-STATE control inputs which can be shorted together for full 16-bit operation. s Separate control logic for each byte s 16-bit version of the ACT240 s Outputs source/sink 24 mA s TTL-compatible inputs Ordering Code: Order Number Package Number Package Description 74ACT16240SSC MS48A 48-Lead Small Shrink Outline Package SSOP , JEDEC MO-118, Wide 74ACT16240MTD MTD48 48-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 6.1mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Connection Diagram Pin Descriptions Pin Names Description Output Enable Inputs Active LOW Inputs Outputs FACT is a trademark of Fairchild Semiconductor Corporation. 1999 Fairchild Semiconductor Corporation DS500293 74ACT16240 Truth Tables Inputs OE1 L Outputs Inputs OE2 L Inputs OE3 L H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = High Impedance Outputs Inputs OE4 L Functional Description The ACT16240 contains sixteen inverting buffers with 3STATE standard outputs. The device is nibble 4 bits controlled with each nibble functioning identically, but independently of the other. The control pins may be shorted together to obtain full 16-bit operation. The 3-STATE outputs are controlled by an Output Enable OEn input for each nibble. When OEn is LOW, the outputs are in 2-state mode. When OEn is HIGH, the outputs are in the high impedance mode, but this does not interfere with entering new data into the inputs. Logic Diagram Outputs Outputs 74ACT16240 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Diode Current IIK VI = −0.5V VI = VCC + 0.5V DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source/Sink Current IO DC VCC or Ground Current per Output Pin Junction Temperature Storage Temperature −0.5V to +7.0V −20 mA +20 mA −20 mA +20 mA −0.5V to VCC + 0.5V ± 50 mA ± 50 mA +140°C −65°C to +150°C Recommended Operating Conditions Supply Voltage VCC Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate 4.5V to 5.5V 0V to VCC 0V to VCC −40°C to +85°C 125 mV/ns VIN from 0.8V to 2.0V |
More datasheets: 3186GH343U050BMA2 | CMS-15116-30-SP | WB-RS232-24LP-A | 9008A BK001 | 9008A BK005 | 9008A BK002 | CPDT6-24V4 | 74ACT16240MTDX | 74ACT16240SSCX | 74ACT16240SSC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74ACT16240MTD Datasheet file may be downloaded here without warranties.