BC212_J35Z

BC212_J35Z Datasheet

BC212 PNP General Purpose Amplifier

Part	Datasheet
BC212_J35Z	BC212_J35Z (pdf)

Related Parts	Information
BC212	BC212
BC212_D26Z	BC212_D26Z
BC212_D75Z	BC212_D75Z
BC212_D27Z	BC212_D27Z
BC212_D74Z	BC212_D74Z

PDF Datasheet Preview
BC212 PNP General Purpose Amplifier BC212 PNP General Purpose Amplifier • This device is designed for general purpose amplifier application at collector currents to 300mA. • Sourced from process September 2007 TO-92 Collector Base Emitter Absolute Maximum Ratings TC=25°C unless otherwise noted VCBO VCEO VEBO IC TJ, TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current DC Operating and Storage Junction Temperature Range * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES 1 These ratings are based on a maximum junction temperature of 150 degrees C. 2 These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Value 60 50 5 300 -55 ~ 150 Units V mA °C Thermal Characteristics Ta=25°C unless otherwise noted Parameter Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient *Device mounted on FR-4 PCB X Max. 625 200 Units mW/°C °C/W °C/W Electrical Characteristics TC=25°C unless otherwise noted Parameter Test Condition BVCBO BVCEO BVEBO IEBO ICBO VCE sat VBE sat VBE on Cob Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Emitter Cut-off Current Collector Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Base-Emitter On Voltage Output Capacitance IC = 10uA IC = 2mA IE = 10uA VEB = 4V VCB = 30V VCE = 5V, IC = 10uA VCE = 5V, IC = 2mA IC = 100 mA, IB = 5 mA IC = 100 mA, IB = 5 mA VCE = 5V, IC = 2mA VCE = 10V, f = 1MHz Min. 60 50 5 40 60 Notes These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3.These ratings are based on a maximum junction temperature of 150degrees C. Typ.

PDF Datasheet Preview

BC212 PNP General Purpose Amplifier

BC212 PNP General Purpose Amplifier
• This device is designed for general purpose amplifier application at collector currents to 300mA.
• Sourced from process

September 2007

TO-92

Collector Base Emitter

Absolute Maximum Ratings TC=25°C unless otherwise noted

VCBO VCEO VEBO IC TJ, TSTG

Parameter

Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current DC Operating and Storage Junction Temperature Range
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

NOTES 1 These ratings are based on a maximum junction temperature of 150 degrees C. 2 These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Value
60 50 5 300 -55 ~ 150

Units

V mA °C

Thermal Characteristics Ta=25°C unless otherwise noted

Parameter

Total Device Dissipation

Derate above 25°C

Thermal Resistance, Junction to Case

Thermal Resistance, Junction to Ambient
*Device mounted on FR-4 PCB X

Max.
625 200

Units
mW/°C °C/W °C/W

Electrical Characteristics TC=25°C unless otherwise noted

Parameter

Test Condition

BVCBO BVCEO BVEBO IEBO ICBO

VCE sat VBE sat VBE on Cob

Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Emitter Cut-off Current Collector Cut-off Current

DC Current Gain

Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Base-Emitter On Voltage Output Capacitance

IC = 10uA IC = 2mA IE = 10uA VEB = 4V VCB = 30V VCE = 5V, IC = 10uA VCE = 5V, IC = 2mA IC = 100 mA, IB = 5 mA IC = 100 mA, IB = 5 mA VCE = 5V, IC = 2mA VCE = 10V, f = 1MHz

Min.
60 50 5
40 60

Notes These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3.These ratings are based on a maximum junction temperature of 150degrees C.

Typ.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BC212_J35Z Datasheet file may be downloaded here without warranties.

Datasheet ID: BC212_J35Z 513145