74LVQ08SJX

74LVQ08SJX Datasheet

74LVQ08 Low Voltage Quad 2-Input AND Gate

Part	Datasheet
74LVQ08SJX	74LVQ08SJX (pdf)

Related Parts	Information
74LVQ08SJ	74LVQ08SJ
74LVQ08SCX	74LVQ08SCX
74LVQ08SC	74LVQ08SC

PDF Datasheet Preview
74LVQ08 Low Voltage Quad 2-Input AND Gate 74LVQ08 Low Voltage Quad 2-Input AND Gate The LVQ08 contains four, 2-input AND gates. s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into Ordering Code: Order Number 74LVQ08SC Package Number M14A Package Description 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 74LVQ08SJ M14D 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names An, Bn On Description Inputs Outputs 2001 Fairchild Semiconductor Corporation DS011344 74LVQ08 Absolute Maximum Ratings Note 1 Supply Voltage VCC DC Input Diode Current IIK VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source or Sink Current IO DC VCC or Ground Current ICC or IGND Storage Temperature TSTG DC Latch-Up Source or Sink Current −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V ±50 mA ±200 mA −65°C to +150°C ±100 mA Recommended Operating Conditions Note 2 Supply Voltage VCC Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate VIN from 0.8V to 2.0V VCC 3.0V 2.0V to 3.6V 0V to VCC 0V to VCC −40°C to +85°C 125 mV/ns Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Parameter Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage Maximum Low Level Output Voltage IOLD IOHD ICC VOLP

PDF Datasheet Preview

74LVQ08 Low Voltage Quad 2-Input AND Gate
74LVQ08 Low Voltage Quad 2-Input AND Gate

The LVQ08 contains four, 2-input AND gates.
s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and
dynamic threshold performance s Guaranteed pin-to-pin skew AC performance s Guaranteed incident wave switching into
Ordering Code:

Order Number 74LVQ08SC

Package Number

M14A

Package Description 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow
74LVQ08SJ

M14D
14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Symbol

Connection Diagram

IEEE/IEC

Pin Descriptions

Pin Names An, Bn On

Description Inputs Outputs
2001 Fairchild Semiconductor Corporation DS011344
74LVQ08

Absolute Maximum Ratings Note 1

Supply Voltage VCC DC Input Diode Current IIK

VI = −0.5V VI = VCC + 0.5V DC Input Voltage VI DC Output Diode Current IOK VO = −0.5V VO = VCC + 0.5V DC Output Voltage VO DC Output Source
or Sink Current IO DC VCC or Ground Current

ICC or IGND Storage Temperature TSTG DC Latch-Up Source or

Sink Current
−0.5V to +7.0V
−20 mA +20 mA −0.5V to VCC + 0.5V
−20 mA +20 mA −0.5V to VCC + 0.5V
±50 mA
±200 mA −65°C to +150°C
±100 mA

Recommended Operating Conditions Note 2

Supply Voltage VCC Input Voltage VI Output Voltage VO Operating Temperature TA Minimum Input Edge Rate

VIN from 0.8V to 2.0V VCC 3.0V
2.0V to 3.6V 0V to VCC 0V to VCC
−40°C to +85°C
125 mV/ns

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 Unused inputs must be held HIGH or LOW. They may not float.

DC Electrical Characteristics

Parameter

Minimum High Level

Input Voltage

Maximum Low Level

Input Voltage

Minimum High Level

Output Voltage

Maximum Low Level

Output Voltage

IOLD IOHD ICC

VOLP

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74LVQ08SJX Datasheet file may be downloaded here without warranties.

Datasheet ID: 74LVQ08SJX 513399