74AC241MTC

74AC241MTC Datasheet

74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs

Part	Datasheet
74AC241MTC	74AC241MTC (pdf)

Related Parts	Information
74AC241SC	74AC241SC
74AC241PC	74AC241PC
74AC241MTCX	74AC241MTCX
74ACT241MTC	74ACT241MTC
74ACT241MTCX	74ACT241MTCX
74ACT241PC	74ACT241PC
74ACT241SCX	74ACT241SCX
74AC241SJX	74AC241SJX
74AC241SJ	74AC241SJ
74AC241SCX	74AC241SCX
74ACT241SC	74ACT241SC
74ACT241SJX	74ACT241SJX
74ACT241SJ	74ACT241SJ

PDF Datasheet Preview
74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs 74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs March 2007 • ICC and IOZ reduced by 50% • Non-inverting 3-STATE outputs drive bus lines or buffer memory address registers • Outputs source/sink 24mA • ACT241 has TTL-compatible inputs The AC/ACT241 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus-oriented transmitter or receiver which provides improved PC board density. Ordering Information Order Number 74AC241SC 74AC241SJ 74AC241MTC 74ACT241SC 74ACT241SJ 74ACT241MTC Package Number Package Description M20B 20-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide M20D 20-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide MTC20 20-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide M20B 20-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide M20D 20-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide MTC20 20-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. Pb-Free package per JEDEC J-STD-020B. Logic Symbol Connection Diagram FACT is a trademark of Fairchild Semiconductor Corporation. Pin Descriptions Pin Names OE1 OE2 Description 3-STATE Output Enable Input 3-STATE Output Enable Input Active HIGH Inputs Outputs 74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs Truth Table Inputs H = HIGH Voltage Level L = LOW Voltage Level Outputs Pins 12, 14, 16, 18 X = Immaterial Z = High Impedance Inputs Outputs Pins 3, 5, 7, 9 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Parameter VCC IIK VI IOK VO IO ICC or IGND TSTG TJ Supply Voltage DC Input Diode Current VI = VI = VCC + 0.5V DC Input Voltage DC Output Diode Current VO = VO = VCC + 0.5V DC Output Voltage DC Output Source or Sink Current DC VCC or Ground Current per Output Pin Storage Temperature Junction Temperature Rating to +7.0V +20mA to VCC + 0.5V +20mA to VCC + 0.5V ±50mA ±50mA to +150°C 140°C Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VI VO TA / Parameter Supply Voltage AC ACT Input Voltage Output Voltage Operating Temperature Minimum Input Edge Rate, AC Devices VIN from 30% to 70% of VCC, VCC 3.3V, 4.5V, 5.5V Minimum Input Edge Rate, ACT Devices VIN from 0.8V to 2.0V, VCC 4.5V, 5.5V Rating 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC to +85°C 125mV/ns 125mV/ns 1988 Fairchild Semiconductor Corporation 74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs DC Electrical Characteristics for AC Symbol VIH Parameter

PDF Datasheet Preview

74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs
74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs

March 2007
• ICC and IOZ reduced by 50%
• Non-inverting 3-STATE outputs drive bus lines or
buffer memory address registers
• Outputs source/sink 24mA
• ACT241 has TTL-compatible inputs

The AC/ACT241 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus-oriented transmitter or receiver which provides improved PC board density.
Ordering Information

Order Number 74AC241SC 74AC241SJ 74AC241MTC 74ACT241SC 74ACT241SJ 74ACT241MTC

Package Number

Package Description

M20B 20-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide

M20D 20-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide

MTC20 20-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide

M20B 20-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide

M20D 20-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide

MTC20 20-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. Pb-Free package per JEDEC J-STD-020B.

Logic Symbol

Connection Diagram

FACT is a trademark of Fairchild Semiconductor Corporation.

Pin Descriptions

Pin Names OE1 OE2

Description 3-STATE Output Enable Input 3-STATE Output Enable Input Active HIGH Inputs Outputs
74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs

Truth Table

Inputs

H = HIGH Voltage Level L = LOW Voltage Level

Outputs Pins 12, 14, 16, 18

X = Immaterial Z = High Impedance

Inputs

Outputs Pins 3, 5, 7, 9

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.

Parameter

VCC IIK

VI IOK

VO IO ICC or IGND TSTG TJ

Supply Voltage DC Input Diode Current

VI = VI = VCC + 0.5V DC Input Voltage DC Output Diode Current VO = VO = VCC + 0.5V DC Output Voltage DC Output Source or Sink Current DC VCC or Ground Current per Output Pin Storage Temperature Junction Temperature

Rating to +7.0V
+20mA to VCC + 0.5V
+20mA to VCC + 0.5V ±50mA ±50mA to +150°C 140°C

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings.

Symbol VCC

VI VO TA /

Parameter Supply Voltage

AC ACT Input Voltage Output Voltage Operating Temperature Minimum Input Edge Rate, AC Devices VIN from 30% to 70% of VCC, VCC 3.3V, 4.5V, 5.5V Minimum Input Edge Rate, ACT Devices VIN from 0.8V to 2.0V, VCC 4.5V, 5.5V

Rating
2.0V to 6.0V 4.5V to 5.5V
0V to VCC 0V to VCC to +85°C 125mV/ns
125mV/ns
1988 Fairchild Semiconductor Corporation
74AC241, 74ACT241 Octal Buffer/Line Driver with 3-STATE Outputs

DC Electrical Characteristics for AC

Symbol VIH

Parameter

More datasheets: 3JS 300 | 3JS 150 | 3JS 200 | 2JS 100 | 3JS 7 | 3JS 1.5 | 3JS 100 | DSR8F600 | 74AC241SC | 74AC241PC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74AC241MTC Datasheet file may be downloaded here without warranties.

Datasheet ID: 74AC241MTC 513089