74AC10SJ

74AC10SJ Datasheet


74AC10, 74ACT10 Triple 3-Input NAND Gate

Part Datasheet
74AC10SJ 74AC10SJ 74AC10SJ (pdf)
Related Parts Information
74ACT10MTCX 74ACT10MTCX 74ACT10MTCX
74ACT10MTC 74ACT10MTC 74ACT10MTC
74ACT10SCX 74ACT10SCX 74ACT10SCX
74AC10MTC 74AC10MTC 74AC10MTC
74AC10SJX 74AC10SJX 74AC10SJX
74AC10MTCX 74AC10MTCX 74AC10MTCX
74AC10SCX 74AC10SCX 74AC10SCX
74ACT10SC 74ACT10SC 74ACT10SC
74AC10SC 74AC10SC 74AC10SC
74AC10PC 74AC10PC 74AC10PC
PDF Datasheet Preview
74AC10, 74ACT10 Triple 3-Input NAND Gate

January 2008
74AC10, 74ACT10 Triple 3-Input NAND Gate
• ICC reduced by 50% on 74AC only
• Outputs source/sink 24mA

The AC/ACT10 contains three, 3-input NAND gates.
Ordering Information

Order Number

Package Number

Package Description
74AC10SC 74AC10SJ 74AC10MTC 74AC10PC 74ACT10SC 74ACT10MTC

M14A M14D MTC14 N14A M14A MTC14
14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow 14-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.

All packages are lead free per JEDEC J-STD-020B standard.

Connection Diagram

Logic Symbol

IEEE/IEC

Pin Description

Pin Names An, Bn, Cn On

Description Inputs Outputs
74AC10, 74ACT10 Triple 3-Input NAND Gate

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.

Parameter

VCC IIK

VI IOK

VO IO ICC or IGND TSTG TJ

Supply Voltage DC Input Diode Current

VI = VI = VCC + 0.5V DC Input Voltage DC Output Diode Current VO = VO = VCC + 0.5V DC Output Voltage DC Output Source or Sink Current DC VCC or Ground Current per Output Pin Storage Temperature Junction Temperature

Rating to +7.0V
+20mA to VCC + 0.5V
+20mA to VCC + 0.5V ±50mA ±50mA to +150°C 140°C

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings.

Symbol VCC

VI VO TA /

Parameter Supply Voltage

AC ACT Input Voltage Output Voltage Operating Temperature Minimum Input Edge Rate, AC Devices VIN from 30% to 70% of VCC, VCC 3.3V, 4.5V, 5.5V Minimum Input Edge Rate, ACT Devices VIN from 0.8V to 2.0V, VCC 4.5V, 5.5V

Rating
2.0V to 6.0V 4.5V to 5.5V
0V to VCC 0V to VCC to +85°C 125mV/ns
125mV/ns
1988 Fairchild Semiconductor Corporation
74AC10, 74ACT10 Triple 3-Input NAND Gate

DC Electrical Characteristics for AC

Parameter

VIH Minimum HIGH Level Input Voltage

VIL Maximum LOW Level Input Voltage

VOH Minimum HIGH Level Output Voltage

VOL Maximum LOW Level Output Voltage

IIN 3

IOLD IOHD ICC 3

Maximum Input Leakage Current
More datasheets: BCM5461SA2KQMG | BCM5461SA1KPFG | BCM5461SA1IPFG | DSR6U600P5-13 | 74ACT10MTCX | 74ACT10MTC | 74ACT10SCX | 74AC10MTC | 74AC10SJX | 74AC10MTCX


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74AC10SJ Datasheet file may be downloaded here without warranties.

Datasheet ID: 74AC10SJ 513072