74ABT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Part | Datasheet |
---|---|
![]() |
74ABT574CSJ (pdf) |
Related Parts | Information |
---|---|
![]() |
74ABT574CMTC |
![]() |
74ABT574CSC |
![]() |
74ABT574CMSAX |
![]() |
74ABT574CMSA |
![]() |
74ABT574CSJX |
![]() |
74ABT574CSCX |
![]() |
74ABT574CMTCX |
PDF Datasheet Preview |
---|
74ABT574 Octal D-Type Flip-Flop with 3-STATE Outputs 74ABT574 Octal D-Type Flip-Flop with 3-STATE Outputs The ABT574 is an octal flip-flop with a buffered common Clock CP and a buffered common Output Enable OE . The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH Clock CP transition. The device is functionally identical to the ABT374 but has broadside pinouts. s Inputs and outputs on opposite sides of package allowing easy interface with microprocessors s Useful as input or output port for microprocessors s Functionally identical to ABT374 s 3-STATE outputs for bus-oriented applications s Output sink capability of 64 mA, source capability of 32 mA s Guaranteed output skew s Guaranteed multiple output switching specifications s Output switching specified for both 50 pF and 250 pF loads s Guaranteed simultaneous switching, noise level and dynamic threshold performance s Guaranteed latchup protection s High impedance glitch free bus loading during entire power up and power down cycle s Non-destructive hot insertion capability Ordering Code: Order Number Package Number Package Description 74ABT574CSC M20B 20-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide 74ABT574CSJ M20D Pb-Free 20-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide 74ABT574CMSA MSA20 20-Lead Shrink Small Outline Package SSOP , JEDEC MO-150, 5.3mm Wide 74ABT574CMTC MTC20 20-Lead Thin Shrink Small Outline Package TSSOP , JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Connection Diagram Pin Descriptions Pin Names Data Inputs Clock Pulse Input Active Rising Edge 3-STATE Output Enable Input Active LOW 3-STATE Outputs 2005 Fairchild Semiconductor Corporation DS011511 74ABT574 Functional Description The ABT574 consists of eight edge-triggered flip-flops with individual D-type inputs and 3-STATE true outputs. The buffered clock and buffered Output Enable are common to all flip-flops. The eight flip-flops will store the state of their individual D inputs that meet the setup and hold times requirements on the LOW-to-HIGH Clock CP transition. Function Table With the Output Enable OE LOW, the contents of the eight flip-flops are available at the outputs. When OE is HIGH, the outputs are in a high impedance state. Operation of the OE input does not affect the state of the flipflops. OE H L H HIGH Voltage Level L LOW Voltage Level X Immaterial High Impedance LOW-to-HIGH Transition NC No Change Logic Diagram Inputs CP H or L H or L H or L H or L Internal Outputs Function Hold Hold Load Load Data Available Data Available NC No Change in Data NC No Change in Data Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. 74ABT574 Absolute Maximum Ratings Note 1 Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage Note 2 Input Current Note 2 mA to mA Voltage Applied to Any Output in the Disabled or |
More datasheets: KSR223G | KSR251G | KSR231G | 153115011 | 131150011 | 1513A5011 | 1532A5011 | 153215011 | 153155011 | 74ABT574CMTC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 74ABT574CSJ Datasheet file may be downloaded here without warranties.