HCPL2731WV

HCPL2731WV Datasheet

SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730

Part	Datasheet
HCPL2731WV	HCPL2731WV (pdf)

Related Parts	Information
HCPL2731W	HCPL2731W
HCPL2730W	HCPL2730W
HCPL2731SD	HCPL2731SD
HCPL2731S	HCPL2731S
HCPL2731SDV	HCPL2731SDV
HCPL2730SDV	HCPL2730SDV
HCPL2730SV	HCPL2730SV
6N139SD	6N139SD
HCPL2730WV	HCPL2730WV
HCPL2731SV	HCPL2731SV
HCPL2730V	HCPL2730V
6N138S	6N138S
6N138SD	6N138SD
6N138W	6N138W
6N139S	6N139S
6N139W	6N139W
6N139	6N139
6N138	6N138
6N139WV	6N139WV
6N138V	6N138V
6N138SV	6N138SV
6N138SDV	6N138SDV
6N139SDV	6N139SDV
6N139SV	6N139SV
6N138WV	6N138WV
6N139V	6N139V
HCPL2730SD	HCPL2730SD
HCPL2730S	HCPL2730S
HCPL2731V	HCPL2731V
HCPL2731	HCPL2731
HCPL2730	HCPL2730

PDF Datasheet Preview
SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730 PACKAGE LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS 6N139 HCPL-2731 SCHEMATIC N/C 1 N/C 4 5 GND 6V 02 5 GND 6N138 / 6N139 HCPL-2730 / HCPL-2731 The 6N138/9 and HCPL-2730/HCPL-2731 optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector. The split darlington separating the input photodiode and the stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. In the dual channel devices, HCPL-2730/HCPL2731, an integrated emitter - base resistor provides superior stability over temperature. The combination of a very low input current of mA and a high current transfer ratio of 2000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA RS232C, while output compatibility is ensured to CMOS as well as high fanout TTL requirements. An internal noise shield provides exceptional common mode rejection of 10 kV/µs. • Low current - mA • Superior CTR-2000% • Superior CMR-10 kV/µs • CTR guaranteed 0-70°C • U.L. recognized File # E90700 • VDE recognized File # 120915 Ordering option V, e.g., 6N138V • Dual Channel - HCPL-2730 • HCPL-2731 • Digital logic ground isolation • Telephone ring detector • EIA-RS-232C line receiver • High common mode noise line receiver • µP bus isolation • Current loop receiver 2003 Fairchild Semiconductor Corporation Page 1 of 16 2/26/04 SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS 6N139 HCPL-2731 ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise Parameter Value Units Storage Temperature Operating Temperature Lead Solder Temperature Wave solder only. See recommended graph for convection or infrared soldering process limits TSTG -55 to +125 TOPR -40 to +85 TSOL 260 for 10 sec °C EMITTER Each Channel IF avg Each Channel IF pk IF trans Each Channel Each Channel Supply Voltage, Output Voltage Each Channel IO avg 6N138 and 6N139 VER 6N138, HCPL-2730 6N139, HCPL-2731 VCC, VO to 18 Output Power Dissipation Each Channel 2003 Fairchild Semiconductor Corporation Page 2 of 16 2/26/04 SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS 6N139 HCPL-2731 ELECTRICAL CHARACTERISTICS TA = 0 to 70°C Unless otherwise ORDERING INFORMATION Option S SD T V TV SV MARKING INFORMATION Example Part Number 6N138S 6N138SD 6N138T 6N138V 6N138TV 6N138SV 6N138SDV Description Surface Mount Lead Bend Surface Mount Tape and reel Lead Spacing VDE0884 lead spacing VDE0884 surface mount VDE0884 surface mount tape and reel 2730 2 V XX YY T1 6 1 Fairchild logo 2 Device number VDE mark Note Only appears on parts ordered with VDE option See order entry table 4 Two digit year code, e.g., ‘03’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code 2003 Fairchild Semiconductor Corporation Page 14 of 16 2/26/04 SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS 6N139 HCPL-2731 Carrier Tape Specifications Temperature °C User Direction of Feed 300 215 C, s 250 225 C peak Time above 183C, sec Ramp up = 3C/sec 0 1 2 3 4 Time Minute • Peak reflow temperature 225C package surface temperature • Time of temperature higher than 183C for seconds • One time soldering reflow is recommended 2003 Fairchild Semiconductor Corporation Page 15 of 16 2/26/04 LOW INPUT CURRENT HIGH GAIN SPLIT DARLINGTON OPTOCOUPLERS SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730 6N139 HCPL-2731 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

PDF Datasheet Preview

SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730

PACKAGE

LOW INPUT CURRENT HIGH GAIN SPLIT

DARLINGTON OPTOCOUPLERS
6N139 HCPL-2731

SCHEMATIC

N/C 1

N/C 4
5 GND
6V 02
5 GND
6N138 / 6N139

HCPL-2730 / HCPL-2731

The 6N138/9 and HCPL-2730/HCPL-2731 optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector.

The split darlington separating the input photodiode and the stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. In the dual channel devices, HCPL-2730/HCPL2731, an integrated emitter - base resistor provides superior stability over temperature.

The combination of a very low input current of mA and a high current transfer ratio of 2000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA RS232C, while output compatibility is ensured to CMOS as well as high fanout TTL requirements. An internal noise shield provides exceptional common mode rejection of 10 kV/µs.
• Low current - mA
• Superior CTR-2000%
• Superior CMR-10 kV/µs
• CTR guaranteed 0-70°C
• U.L. recognized File # E90700
• VDE recognized File # 120915 Ordering option V, e.g., 6N138V
• Dual Channel - HCPL-2730
• HCPL-2731
• Digital logic ground isolation
• Telephone ring detector
• EIA-RS-232C line receiver
• High common mode noise line receiver
• µP bus isolation
• Current loop receiver
2003 Fairchild Semiconductor Corporation

Page 1 of 16
2/26/04

SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730

LOW INPUT CURRENT HIGH GAIN SPLIT

DARLINGTON OPTOCOUPLERS
6N139 HCPL-2731

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise

Parameter

Value

Units

Storage Temperature Operating Temperature Lead Solder Temperature Wave solder only. See recommended graph for convection or infrared soldering process limits

TSTG
-55 to +125

TOPR
-40 to +85

TSOL 260 for 10 sec °C

EMITTER

Each Channel IF avg

Each Channel IF pk

IF trans

Each Channel

Each Channel

Supply Voltage, Output Voltage

Each Channel IO avg
6N138 and 6N139 VER
6N138, HCPL-2730
6N139, HCPL-2731 VCC, VO
to 18

Output Power Dissipation

Each Channel
2003 Fairchild Semiconductor Corporation

Page 2 of 16
2/26/04

SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730

LOW INPUT CURRENT HIGH GAIN SPLIT

DARLINGTON OPTOCOUPLERS
6N139 HCPL-2731

ELECTRICAL CHARACTERISTICS TA = 0 to 70°C Unless otherwise
ORDERING INFORMATION

Option S SD T V TV SV

MARKING INFORMATION

Example Part Number 6N138S 6N138SD 6N138T 6N138V 6N138TV 6N138SV
6N138SDV

Description Surface Mount Lead Bend Surface Mount Tape and reel Lead Spacing VDE0884 lead spacing VDE0884 surface mount VDE0884 surface mount tape and reel
2730 2 V XX YY T1 6
1 Fairchild logo
2 Device number

VDE mark Note Only appears on parts ordered with VDE option See order entry table
4 Two digit year code, e.g., ‘03’
5 Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
2003 Fairchild Semiconductor Corporation

Page 14 of 16
2/26/04

SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730

LOW INPUT CURRENT HIGH GAIN SPLIT

DARLINGTON OPTOCOUPLERS
6N139 HCPL-2731

Carrier Tape Specifications

Temperature °C

User Direction of Feed
300 215 C, s
250 225 C peak

Time above 183C, sec

Ramp up = 3C/sec
0 1 2 3 4

Time Minute
• Peak reflow temperature 225C package surface temperature
• Time of temperature higher than 183C for seconds
• One time soldering reflow is recommended
2003 Fairchild Semiconductor Corporation

Page 15 of 16
2/26/04

LOW INPUT CURRENT HIGH GAIN SPLIT

DARLINGTON OPTOCOUPLERS

SINGLE-CHANNEL 6N138 DUAL-CHANNEL HCPL-2730
6N139 HCPL-2731

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HCPL2731WV Datasheet file may be downloaded here without warranties.

Datasheet ID: HCPL2731WV 513027