100325QCX

100325QCX Datasheet

100325 Low Power Hex ECL-to-TTL Translator

Part	Datasheet
100325QCX	100325QCX (pdf)

Related Parts	Information
100325SC	100325SC
100325QIX	100325QIX
100325QI	100325QI
100325SCX	100325SCX
100325QC	100325QC

PDF Datasheet Preview
100325 Low Power Hex ECL-to-TTL Translator 100325 Low Power Hex ECL-to-TTL Translator The 100325 is a hex translator for converting F100K logic levels to TTL logic levels. Differential inputs allow each circuit to be used as an inverting, non-inverting or differential receiver. An internal reference voltage generator provides VBB for single-ended operation, or for use in Schmitt trigger applications. All inputs have pull-down resistors. When the inputs are either unconnected or at the same potential the outputs will go LOW. When used in single-ended operation the apparent input threshold of the true inputs is 20mV to 40mV higher positive than the threshold of the complementary inputs. The VEE and VTTL power may be applied in either order. s Pin/function compatible with 100125 s Meets 100125 AC specifications s 50% power reduction of the 100125 s Differential inputs with built in offset s Standard outputs s 2000V ESD protection s −4.2V to −5.7V operating range s Available to industrial grade temperature range Ordering Code: Order Number Package Number Package Description 100325SC M24B 24-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide 100325PC N24E 24-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-010, Wide 100325QI V28A 28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square 100325QC V28A 28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square Industrial Temperature Range −40°C to +85°C Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagrams 24-Pin DIP/SOIC 28-Pin PLCC Pin Descriptions Pin Names Description Data Inputs Inverting Data Inputs Data Outputs is a registered trademark of Fairchild Semiconductor Corporation. 2000 Fairchild Semiconductor Corporation DS009879 100325 Truth Table Inputs OPEN VEE L H = HIGH Voltage Level L = LOW Voltage Level OPEN VEE VBB L H Outputs Qn L H L Logic Diagram 100325 Absolute Maximum Ratings Note 1 Recommended Operating Storage Temperature TSTG −65°C to +150°C Conditions Maximum Junction Temperature TJ VEE Pin Potential to Ground Pin +150°C Case Temperature TC −7.0V to +0.5V Commercial 0°C to +85°C VTTL Pin Potential to Ground Pin −0.5V to +6.0V Industrial −40°C to +85°C Input Voltage DC Voltage Applied to Output VEE to +0.5V Supply Voltage VEE −5.7V to −4.2V in HIGH State with VCC = 0V Current Applied to Output in LOW State Max ESD Note 2 −0.5V to VCC twice the rated IOL mA Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 ESD testing conforms to MIL-STD-883, Method Commercial Version DC Electrical Characteristics VEE = −4.2V to −5.7V, VCC = GND, VTTL = +4.5V to 5.5V, TC = 0°C to +85°C Note 3

PDF Datasheet Preview

100325 Low Power Hex ECL-to-TTL Translator
100325 Low Power Hex ECL-to-TTL Translator

The 100325 is a hex translator for converting F100K logic levels to TTL logic levels. Differential inputs allow each circuit to be used as an inverting, non-inverting or differential receiver. An internal reference voltage generator provides VBB for single-ended operation, or for use in Schmitt trigger applications. All inputs have pull-down resistors. When the inputs are either unconnected or at the same potential the outputs will go LOW.

When used in single-ended operation the apparent input threshold of the true inputs is 20mV to 40mV higher positive than the threshold of the complementary inputs. The VEE and VTTL power may be applied in either order.
s Pin/function compatible with 100125 s Meets 100125 AC specifications s 50% power reduction of the 100125 s Differential inputs with built in offset s Standard outputs s 2000V ESD protection s −4.2V to −5.7V operating range s Available to industrial grade temperature range
Ordering Code:

Order Number Package Number

Package Description
100325SC

M24B
24-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-013, Wide
100325PC

N24E
24-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-010, Wide
100325QI

V28A
28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square
100325QC

V28A
28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square Industrial Temperature Range −40°C to +85°C
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagrams
24-Pin DIP/SOIC
28-Pin PLCC

Pin Descriptions

Pin Names

Description Data Inputs Inverting Data Inputs Data Outputs
is a registered trademark of Fairchild Semiconductor Corporation.
2000 Fairchild Semiconductor Corporation DS009879
100325

Truth Table

Inputs

OPEN

VEE L

H = HIGH Voltage Level L = LOW Voltage Level

OPEN VEE VBB L H

Outputs Qn L H L

Logic Diagram
100325

Absolute Maximum Ratings Note 1

Recommended Operating

Storage Temperature TSTG
−65°C to +150°C Conditions

Maximum Junction Temperature TJ VEE Pin Potential to Ground Pin
+150°C Case Temperature TC −7.0V to +0.5V Commercial
0°C to +85°C

VTTL Pin Potential to Ground Pin
−0.5V to +6.0V Industrial
−40°C to +85°C

Input Voltage DC Voltage Applied to Output

VEE to +0.5V Supply Voltage VEE
−5.7V to −4.2V
in HIGH State with VCC = 0V Current Applied to Output
in LOW State Max ESD Note 2
−0.5V to VCC
twice the rated IOL mA

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 ESD testing conforms to MIL-STD-883, Method

Commercial Version

DC Electrical Characteristics

VEE = −4.2V to −5.7V, VCC = GND, VTTL = +4.5V to 5.5V, TC = 0°C to +85°C Note 3

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 100325QCX Datasheet file may be downloaded here without warranties.

Datasheet ID: 100325QCX 512967