100315SC

100315SC Datasheet

100315 Low Skew Quad Clock Driver

Part	Datasheet
100315SC	100315SC (pdf)

Related Parts	Information
100315SCX	100315SCX

PDF Datasheet Preview
100315 Low Skew Quad Clock Driver 100315 Low Skew Quad Clock Driver The 100315 contains four low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input. This device also has the capability to select a secondary single-ended clock source for use in lower frequency system level testing. The 100315 is a 300 Series redesign of the 100115 clock driver. s Low output-to-output skew ps s Differential inputs and outputs s Secondary clock available for system level testing s 2000V ESD protection s Voltage compensated operating range −4.2V to −5.7V Ordering Code: Order Number Package Number Package Descriptions 100315SC M16A 16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Diagram Connection Diagram Pin Descriptions Truth Table Pin Names CLKIN, CLKIN Differential Clock Inputs TCLK Differential Clock Outputs Test Clock Input Note 1 CLKSEL Clock Input Select Note 1 Note 1 TCLK and CLKSEL are single-ended inputs, with internal 50 pull-down resistors. CLKSEL CLKIN L = LOW Voltage Level H = HIGH Voltage Level X = Don't Care CLKIN H L X TCLK X L H CLKn L H L H CLKn H L H L 1999 Fairchild Semiconductor Corporation DS010960 100315 Absolute Maximum Ratings Note 2 Storage Temperature Maximum Junction Temperature TJ Case Temperature under Bias TC VEE Pin Potential to Ground Pin Input Voltage DC Output Current DC Output HIGH Operating Range Note 2 ESD Note 3 −65°C to +150°C +150°C 0°C to +85°C −7.0V to +0.5V VCC to +0.5V −50 mA −5.7V to −4.2V Recommended Operating Conditions Case Temperature TC 0°C to +85°C Supply Voltage VEE −5.7V to −4.2V Note 2 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3 ESD testing conforms to MIL-STD-883, Method DC Electrical Characteristics Note 4 VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C Parameter Units Conditions VOH VOL VOHC VOLC VIH VIL IIL IIH Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Single-Ended Input HIGH Voltage Single-Ended Input LOW Voltage Input LOW Current Input HIGH Current

PDF Datasheet Preview

100315 Low Skew Quad Clock Driver
100315 Low Skew Quad Clock Driver

The 100315 contains four low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input. This device also has the capability to select a secondary single-ended clock source for use in lower frequency system level testing. The 100315 is a 300 Series redesign of the 100115 clock driver.
s Low output-to-output skew ps s Differential inputs and outputs s Secondary clock available for system level testing s 2000V ESD protection s Voltage compensated operating range −4.2V to −5.7V
Ordering Code:

Order Number Package Number

Package Descriptions
100315SC

M16A
16-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Diagram

Connection Diagram

Pin Descriptions

Truth Table

Pin Names

CLKIN, CLKIN

Differential Clock Inputs

TCLK

Differential Clock Outputs Test Clock Input Note 1

CLKSEL

Clock Input Select Note 1

Note 1 TCLK and CLKSEL are single-ended inputs, with internal 50 pull-down resistors.

CLKSEL CLKIN

L = LOW Voltage Level H = HIGH Voltage Level X = Don't Care

CLKIN H L X

TCLK X L H

CLKn L H L H

CLKn H L H L
1999 Fairchild Semiconductor Corporation DS010960
100315

Absolute Maximum Ratings Note 2

Storage Temperature Maximum Junction Temperature TJ Case Temperature under Bias TC VEE Pin Potential to Ground Pin Input Voltage DC Output Current DC Output HIGH Operating Range Note 2 ESD Note 3
−65°C to +150°C +150°C
0°C to +85°C −7.0V to +0.5V

VCC to +0.5V −50 mA
−5.7V to −4.2V

Recommended Operating Conditions

Case Temperature TC
0°C to +85°C

Supply Voltage VEE
−5.7V to −4.2V

Note 2 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 3 ESD testing conforms to MIL-STD-883, Method

DC Electrical Characteristics Note 4

VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C

Parameter

Units

Conditions

VOH VOL VOHC VOLC VIH VIL IIL IIH

Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Single-Ended Input HIGH Voltage Single-Ended Input LOW Voltage Input LOW Current Input HIGH Current

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 100315SC Datasheet file may be downloaded here without warranties.

Datasheet ID: 100315SC 512965