AS7C31026C-10BINTR

AS7C31026C-10BINTR Datasheet

AS7C31026C

Part	Datasheet
AS7C31026C-10BINTR	AS7C31026C-10BINTR (pdf)

Related Parts	Information
AS7C31026C-10BIN	AS7C31026C-10BIN

PDF Datasheet Preview
September 2006 Advance Information AS7C31026C V 64K X 16 CMOS SRAM Features • Industrial -40o to 85oC temperature • Organization 65,536 words x 16 bits • Center power and ground pins for low noise • High speed - 12 ns address access time - 6 ns output enable access time • Low power consumption via chip deselect • Upper and Lower byte pin • Easy memory expansion with CE, OE inputs • TTL-compatible, three-state I/O • JEDEC standard packaging - 44-pin 400 mil SOJ - 44-pin TSOP 2-400 - 48-ball 7 x 7 mm BGA • ESD protection ? 2000 volts Address decoder A8 A9 A10 A11 A12 A13 A14 A15 AS7C31026C Logic block diagram A0 A1 A2 A3 A4 A5 A6 A7 I/O buffer 65,536 x 16 Array Control circuit Address decoder UB OE LB CE Pin arrangement 44-Pin SOJ 400 mil , TSOP 2 I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 I/O15 I/O14 I/O13 I/O12 I/O11 I/O10 I/O9 I/O8 - BGA Ball-Grid-Array Package 1 2 3 45 6 A LB OE A0 A1 A2 NC B I/O8 UB A3 A4 CE I/O0 C I/O9 I/O10 A5 A6 I/O1 I/O2 D VSS I/O11 NC E VDD I/O12 NC F I/O14 I/O13 A14 A7 I/O3 VDD NC I/O4 VSS A15 I/O5 I/O6 Ordering codes Package Plastic SOJ, 400 mil TSOP 2, x mm BGA, 7 x 7 mm Volt/Temp 3.3V industrial 3.3V industrial 3.3V industrial 12 ns AS7C31026C-12JIN AS7C31026C-12TIN AS7C31026C-12BIN Part numbering system AS7C 1026B SRAM prefix Voltage: 3 = V CMOS Device number Access time Package Temperature J = SOJ 400 mil T = TSOP 2, x mm I = industrial -40° C to 85° C B=BGA, 7 x 7 mm X N = Lead Free Part 9/20/06, v Alliance Memory P. 9 of 10 AS7C31026C Alliance Memory, Inc. 511 Taylor Way San Carlos, CA 94070, USA Tel 650-610-6800 Fax 650-620-9211 Copyright Alliance Memory All Rights Reserved Part Number AS7C31026C-12JIN Document Version v Copyright 2008 Alliance Memory, Inc. All rights reserved. Our three-point logo, our name and Intelliwatt are trademarks or registered trademarks of Alliance. All other brand and product names may be the trademarks of their respective companies. Alliance reserves the right to make changes to this document and its products at any time without notice. Alliance assumes no responsibility for any errors that may appear in this document. The data contained herein represents Alliance's best data and/or estimates at the time of issuance. Alliance reserves the right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. Alliance does not assume any responsibility or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties related to the sale and/or use of Alliance products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to in Alliance's Terms and Conditions of Sale which are available from Alliance . All sales of Alliance products are made exclusively according to Alliance's Terms and Conditions of Sale. The purchase of products from Alliance does not convey a license under any patent rights, copyrights mask works rights, trademarks, or any other intellectual property rights of Alliance or third parties. Alliance does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of Alliance products in such life-supporting systems implies that the manufacturer assumes all risk of such use and agrees to indemnify Alliance against all claims arising from such use.

PDF Datasheet Preview

September 2006 Advance Information

AS7C31026C

V 64K X 16 CMOS SRAM

Features
• Industrial -40o to 85oC temperature
• Organization 65,536 words x 16 bits
• Center power and ground pins for low noise
• High speed
- 12 ns address access time - 6 ns output enable access time
• Low power consumption via chip deselect
• Upper and Lower byte pin
• Easy memory expansion with CE, OE inputs
• TTL-compatible, three-state I/O
• JEDEC standard packaging - 44-pin 400 mil SOJ - 44-pin TSOP 2-400 - 48-ball 7 x 7 mm BGA
• ESD protection ? 2000 volts

Address decoder

A8 A9 A10 A11 A12 A13 A14 A15

AS7C31026C

Logic block diagram

A0 A1 A2 A3 A4 A5 A6 A7

I/O buffer
65,536 x 16

Array

Control circuit Address decoder

UB OE LB CE

Pin arrangement
44-Pin SOJ 400 mil , TSOP 2

I/O0

I/O1

I/O2

I/O3

I/O4

I/O5

I/O6

I/O7

I/O15

I/O14

I/O13

I/O12

I/O11

I/O10

I/O9

I/O8
- BGA Ball-Grid-Array Package
1 2 3 45 6

A LB OE A0 A1 A2 NC B I/O8 UB A3 A4 CE I/O0

C I/O9 I/O10 A5 A6 I/O1 I/O2

D VSS I/O11 NC E VDD I/O12 NC F I/O14 I/O13 A14

A7 I/O3 VDD NC I/O4 VSS A15 I/O5 I/O6
Ordering codes

Package Plastic SOJ, 400 mil TSOP 2, x mm BGA, 7 x 7 mm

Volt/Temp 3.3V industrial 3.3V industrial 3.3V industrial
12 ns AS7C31026C-12JIN AS7C31026C-12TIN AS7C31026C-12BIN

Part numbering system

AS7C
1026B

SRAM prefix

Voltage:
3 = V CMOS

Device number

Access time

Package Temperature

J = SOJ 400 mil T = TSOP 2, x mm I = industrial -40° C
to 85° C B=BGA, 7 x 7 mm

X N = Lead Free Part
9/20/06, v

Alliance Memory

P. 9 of 10

AS7C31026C

Alliance Memory, Inc. 511 Taylor Way San Carlos, CA 94070, USA Tel 650-610-6800 Fax 650-620-9211

Copyright Alliance Memory All Rights Reserved Part Number AS7C31026C-12JIN Document Version v

Copyright 2008 Alliance Memory, Inc. All rights reserved. Our three-point logo, our name and Intelliwatt are trademarks or registered trademarks of Alliance. All other brand and product names may be the trademarks of their respective companies. Alliance reserves the right to make changes to this document and its products at any time without notice. Alliance assumes no responsibility for any errors that may appear in this document. The data contained herein represents Alliance's best data and/or estimates at the time of issuance. Alliance reserves the right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. Alliance does not assume any responsibility or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties related to the sale and/or use of Alliance products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to in Alliance's Terms and Conditions of Sale which are available from Alliance . All sales of Alliance products are made exclusively according to Alliance's Terms and Conditions of Sale. The purchase of products from Alliance does not convey a license under any patent rights, copyrights mask works rights, trademarks, or any other intellectual property rights of Alliance or third parties. Alliance does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of Alliance products in such life-supporting systems implies that the
manufacturer assumes all risk of such use and agrees to indemnify Alliance against all claims arising from such use.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS7C31026C-10BINTR Datasheet file may be downloaded here without warranties.

Datasheet ID: AS7C31026C-10BINTR 516141