1N6264

1N6264 Datasheet

1N6264

Part	Datasheet
1N6264	1N6264 (pdf)

PDF Datasheet Preview
1N6264 GaAs INFRARED EMITTING DIODE PACKAGE DIMENSIONS • Good optical to mechanical alignment • Mechanically and wavelength matched to the TO-18 series phototransistor • Hermetically sealed package • High irradiance level • * Indicates JEDEC registered values ANODE CASE 13 45° Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions unless otherwise specified. • The 1N6264 is a 940 nm LED in a narrow angle, TO-46 package. SCHEMATIC ANODE Connected To Case CATHODE Derate power dissipation linearly mW/°C above 25°C ambient. Derate power dissipation linearly mW/°C above 25°C case. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron tip 1/16” 1.6mm minimum from housing. As long as leads are not under any stress or spring tension Total power output, PO, is the total power radiated by the device into a solid angle of 2 H steradians. ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Power Dissipation TC = 25°C 2 TOPR TSTG TSOL-I TSOL-F IF VR PD Rating -65 to +125 -65 to +150 240 for 5 sec 260 for 10 sec 100 10 3 170 Unit °C °C °C °C mA A V mW W ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C All measurements made under pulse conditions TEST CONDITIONS IF = 100 mA IF = 100 mA IF = 100 mA VR = 3 V IF = 100 mA UNITS nm Deg. V µA mW µs µs 2001 Fairchild Semiconductor Corporation DS300276 3/2/01 1 OF 3 1N6264 GaAs INFRARED EMITTING DIODE NORMALIZED POWER OUTPUT IF - FORWARD CURRENT mA 100 50 Pulsed

PDF Datasheet Preview

1N6264

GaAs INFRARED EMITTING DIODE

PACKAGE DIMENSIONS
• Good optical to mechanical alignment
• Mechanically and wavelength matched to the

TO-18 series phototransistor
• Hermetically sealed package
• High irradiance level
• * Indicates JEDEC registered values

ANODE CASE
13 45°

Dimensions for all drawings are in inches mm . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.
• The 1N6264 is a 940 nm LED in a narrow angle, TO-46 package.

SCHEMATIC

ANODE

Connected

To Case

CATHODE

Derate power dissipation linearly mW/°C above 25°C ambient. Derate power dissipation linearly mW/°C above 25°C case. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning
agents. Soldering iron tip 1/16” 1.6mm minimum from housing. As long as leads are not under any stress or spring tension Total power output, PO, is the total power radiated by the device into
a solid angle of 2 H steradians.

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Power Dissipation TC = 25°C 2

TOPR TSTG TSOL-I TSOL-F

IF VR PD

Rating -65 to +125 -65 to +150 240 for 5 sec 260 for 10 sec
100 10 3 170

Unit °C °C °C °C mA A V mW W

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C All measurements made under pulse conditions

TEST CONDITIONS

IF = 100 mA IF = 100 mA IF = 100 mA

VR = 3 V IF = 100 mA

UNITS nm

Deg. V
µA mW
µs µs
2001 Fairchild Semiconductor Corporation DS300276 3/2/01
1 OF 3
1N6264

GaAs INFRARED EMITTING DIODE

NORMALIZED POWER OUTPUT

IF - FORWARD CURRENT mA
100 50

Pulsed

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 1N6264 Datasheet file may be downloaded here without warranties.

Datasheet ID: 1N6264 512653