JN5148-UG010

JN5148-UG010 Datasheet

Product Brief JN5148-EK010

Part	Datasheet
JN5148-UG010	JN5148-UG010 (pdf)

Related Parts	Information
JN5148-EK010,596	JN5148-EK010,596

PDF Datasheet Preview
Product Brief JN5148-EK010 ZigBee PRO Evaluation Kit Overview Jennic’s JN5148-EK010 ZigBee PRO evaluation kit provides a complete environment for the development of ZigBee PRO applications based on the JN5148 wireless microcontroller. The kit contains a complete package of hardware and software, including five wireless sensor nodes, an unrestricted software developer kit SDK , and example code. The SDK provides a complete set of development tools, software libraries and APIs Application Programming Interfaces for programming and controlling the on-chip peripherals of the JN5148, for configuring and managing the network and for data communication. Out of the box, the hardware nodes are pre-programmed and demonstrate an example home sensor demo that monitors the state of sensors on the wireless nodes and presents this information on the controller node’s LCD display. Software Architecture Hardware Architecture • Complete SDK and network stack • Stack and hardware “ZigBee Compliant Platform” certified • Unrestricted development environment no license fee • Rapid application development and demonstration • Application examples • Profile support with increasing number of supported clusters • Elliptic Curve Cryptography ECC library for Smart Energy security support available from Certicom • Binaries for Daintree Sensor Network Analyser • Smart energy / smart grid load control and demand response • Building Automation HVAC, lighting control, access control, security, fire detection and alarm • Industrial Automation and Control pressure, temperature, level sensing, flow control • Home Control remote security and surveillance, heating control, lighting control, energy management • Medical patient monitoring, asset tagging Features: Wireless sensor nodes 5 off • JN5148 module o 2 x PCB antenna o 3 x uFl connected to SMA for antenna change • Onboard temperature, light level and humidity sensors • JN5148 IO expansion port • 2 x USB cables • Battery or external power supply • 1 node with bitmapped LCD High power modules 2 off • JN5148 high power module for extended range Software development kit • GNU-based toolchain - C compiler • Flash programmer • Eclipse IDE • GNU Debugger GDB integrated in Eclipse • Microcontroller and peripheral libraries Application support • User guides, reference manual, datasheets JN5148-EK010-PB v1.0 Jennic Ltd 2009 Software Development The SDK includes a complete toolchain for rapid application development and debug, including C compiler, assembler, GNU Debugger GDB and flash programmer. The toolchain is based upon the industry standard GNU tools running on Windows platforms. The industry standard Eclipse IDE integrates the tool chain, the RTOS and the stack configuration tool into a development environment that offers maximum customisation and collaboration between groups of developers. Out of the box, the evaluation kit runs a home sensor demo, which measures the light, humidity and temperature levels on the wireless nodes and sends this data back to the network coordinator. In addition there are various application notes with pre-compiled binaries available as download from the Jennic support web page. Development Hardware Jennic’s ZigBee PRO evaluation kit contains 5 battery powered wireless nodes. Each node contains temperature, humidity and light-level sensors and features Jennic’s JN5148 wireless microcontroller implemented on a compact reference module. An expansion port enables connection of additional sensors and controls to the wireless microcontroller and its peripherals. Programming of the flash memory and/or serial communications with the wireless nodes is achieved by the connection of a USB cable provided with the kit. One wireless node contains a 128x64 bitmapped LCD. For range testing and module evaluation, two high power modules with a maximum output of 20dbm are included in the kit. ZigBee PRO Upgrade Kit JN5148-UG010

PDF Datasheet Preview

Product Brief JN5148-EK010

ZigBee PRO Evaluation Kit

Overview

Jennic’s JN5148-EK010 ZigBee PRO evaluation kit provides a complete environment for the development of ZigBee PRO applications based on the JN5148 wireless microcontroller. The kit contains a complete package of hardware and software, including five wireless sensor nodes, an unrestricted software developer kit SDK , and example code.

The SDK provides a complete set of development tools, software libraries and APIs Application Programming Interfaces for programming and controlling the on-chip peripherals of the JN5148, for configuring and managing the network and for data communication.

Out of the box, the hardware nodes are pre-programmed and demonstrate an example home sensor demo that monitors the state of sensors on the wireless nodes and presents this information on the controller node’s LCD display.

Software Architecture

Hardware Architecture
• Complete SDK and network stack
• Stack and hardware “ZigBee Compliant Platform” certified
• Unrestricted development environment no license fee
• Rapid application development and demonstration
• Application examples
• Profile support with increasing number of supported clusters
• Elliptic Curve Cryptography ECC library for Smart Energy security support available from Certicom
• Binaries for Daintree Sensor Network Analyser
• Smart energy / smart grid load control and demand response
• Building Automation HVAC, lighting control, access control, security, fire detection and alarm
• Industrial Automation and Control pressure, temperature, level sensing, flow control
• Home Control remote security and surveillance, heating control, lighting control, energy management
• Medical patient monitoring, asset tagging

Features:

Wireless sensor nodes 5 off
• JN5148 module
o 2 x PCB antenna o 3 x uFl connected to SMA
for antenna change
• Onboard temperature, light
level and humidity sensors
• JN5148 IO expansion port
• 2 x USB cables
• Battery or external power
supply
• 1 node with bitmapped LCD High power modules 2 off
• JN5148 high power module
for extended range Software development kit
• GNU-based toolchain - C
compiler
• Flash programmer
• Eclipse IDE
• GNU Debugger GDB
integrated in Eclipse
• Microcontroller and peripheral
libraries Application support
• User guides, reference
manual, datasheets

JN5148-EK010-PB v1.0

Jennic Ltd 2009

Software Development

The SDK includes a complete toolchain for rapid application development and debug, including C compiler, assembler, GNU Debugger GDB and flash programmer. The toolchain is based upon the industry standard GNU tools running on Windows platforms. The industry standard Eclipse IDE integrates the tool chain, the RTOS and the stack configuration tool into a development environment that offers maximum customisation and collaboration between groups of developers.

Out of the box, the evaluation kit runs a home sensor demo, which measures the light, humidity and temperature levels on the wireless nodes and sends this data back to the network coordinator. In addition there are various application notes with pre-compiled binaries available as download from the Jennic support web page.

Development Hardware

Jennic’s ZigBee PRO evaluation kit contains 5 battery powered wireless nodes. Each node contains temperature, humidity and light-level sensors and features Jennic’s JN5148 wireless microcontroller implemented on a compact reference module.

An expansion port enables connection of additional sensors and controls to the wireless microcontroller and its peripherals. Programming of the flash memory and/or serial communications with the wireless nodes is achieved by the connection of a USB cable provided with the kit. One wireless node contains a 128x64 bitmapped LCD. For range testing and module evaluation, two high power modules with a maximum output of 20dbm are included in the kit.

ZigBee PRO Upgrade Kit JN5148-UG010

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JN5148-UG010 Datasheet file may be downloaded here without warranties.

Datasheet ID: JN5148-UG010 644583