MC13193FC

MC13193FC Datasheet

Document Number MC13192 Rev. 03/2007

Part	Datasheet
MC13193FC	MC13193FC (pdf)

Related Parts	Information
MC13193FCR2	MC13193FCR2

PDF Datasheet Preview
Freescale Semiconductor Technical Data MC13192/MC13193 MC13192/MC13193 GHz Low Power Transceiver for the Standard Scale 1:1 Package Information Plastic Package Case 1311-03 QFN-32 Ordering Information Device MC13192 MC13193 Device Marking 13192 13193 Package QFN-32 QFN-32 1 Introduction The MC13192 and MC13193 are short range, low power, GHz Industrial, Scientific, and Medical ISM band transceivers. The MC13192/MC13193 contain a complete physical layer PHY modem designed for the Standard which supports peer-to-peer, star, and mesh networking. The MC13192 includes the PHY/MAC for use with the HCS08 Family of MCUs. The MC13193 also includes the PHY/MAC plus the ZigBee Protocol Stack for use with the HCS08 Family of MCUs. With the exception of the addition of the ZigBee Protocol Stack, the MC13193 functionality is the same as the MC13192. When combined with an appropriate microcontroller MCU , the MC13192/MC13193 provide a cost-effective solution for short-range data links and networks. Interface with the MCU is accomplished using a four wire serial peripheral interface SPI connection and an interrupt request output which allows for the use of a variety of processors. The software and processor Contents 1 Introduction 1 2 Features 2 3 Block Diagrams 4 Data Transfer Modes 5 Electrical Characteristics 7 6 Functional Description 11 7 Pin Connections 14 8 Applications Information 17 9 Packaging Information 23 Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Freescale Semiconductor, Inc., 2004, 2005, 2006, All rights reserved. can be scaled to fit applications ranging from simple point-to-point systems, through complete ZigBee networking. For more detailed information about MC13192/MC13192 operation, refer to the MC13192/MC13193 Reference Manual, MC13192RM . Applications include, but are not limited to, the following • Remote control and wire replacement in industrial systems such as wireless sensor networks • Factory automation and motor control • Energy Management lighting, HVAC, etc. • Asset tracking and monitoring Potential consumer applications include • Home automation and control lighting, thermostats, etc. • Human interface devices keyboard, mice, etc. • Remote control • Wireless toys The transceiver includes a low noise amplifier, mW power amplifier PA , PLL with internal voltage controlled oscillator VCO , on-board power supply regulation, and full spread-spectrum encoding and decoding. The device supports 250 kbps Offset-Quadrature Phase Shift Keying O-QPSK data in MHz channels with MHz channel spacing per the Standard. The SPI port and interrupt request output are used for receive RX and transmit TX data transfer and control. 2 Features • Supports 250 kbps O-QPSK data in MHz channels and full spread-spectrum encode and decode compatible with the Standard • Operates on one of 16 selectable channels in the GHz band • RX sensitivity of <-92 dBm typical at packet error rate • 0 dBm nominal, programmable from -27 dBm to 4 dBm typical maximum output power • Recommended power supply range to V • Buffered transmit and receive data packets for simplified use with low cost MCUs • Three power down modes for power conservation: < 1 µA Off current 1 µA Typical Hibernate current 35 µA Typical Doze current no CLKO • Four internal timer comparators available to supplement MCU resource • Programmable frequency clock output CLKO for use by MCU • Onboard trim capability for 16 MHz crystal reference oscillator eliminates need for external variable capacitors and allows for automated production frequency calibration. • Seven general purpose input/output GPIO signals Freescale Semiconductor • Operating temperature range -40 °C to 85 °C • Small form factor QFN-32 Package RoHS compliant Meets moisture sensitivity level MSL 3 260 °C peak reflow temperature Meets lead-free requirements Software Features Freescale provides a wide range of software functionality to complement the MC13192/MC13193 hardware. There are three levels of application solutions: Simple proprietary wireless connectivity. User networks built on the MAC standard. ZigBee-compliant network stack. Simple MAC SMAC • Small memory footprint about 3 Kbytes typical • Supports point-to-point and star network configurations • Proprietary networks • Source code and application examples provided Standard-Compliant MAC • Supports star, mesh and cluster tree topologies • Supports beaconed networks • Supports GTS for low latency • Multiple power saving modes idle doze, hibernate ZigBee-Compliant Network Stack • Supports ZigBee specification • Supports star, mesh and tree networks • Advanced Encryption Standard AES 128-bit security Freescale Semiconductor Block Diagrams 3 Block Diagrams Figure 1 shows a simplified block diagram of the MC13192/MC13193 which is an Standard compatible transceiver that provides the functions required in the physical layer PHY specification. MUX Correlator Symbol Synch & Det SERIAL PERIPHERAL INTERFACE

PDF Datasheet Preview

Freescale Semiconductor Technical Data

MC13192/MC13193

MC13192/MC13193

GHz Low Power Transceiver for the Standard

Scale 1:1

Package Information Plastic Package Case 1311-03 QFN-32
Ordering Information

Device

MC13192 MC13193

Device Marking
13192 13193

Package

QFN-32 QFN-32
1 Introduction

The MC13192 and MC13193 are short range, low power, GHz Industrial, Scientific, and Medical ISM band transceivers. The MC13192/MC13193 contain a complete physical layer PHY modem designed for the Standard which supports peer-to-peer, star, and mesh networking.

The MC13192 includes the PHY/MAC for use with the HCS08 Family of MCUs. The MC13193 also includes the PHY/MAC plus the ZigBee Protocol Stack for use with the HCS08 Family of MCUs. With the exception of the addition of the ZigBee Protocol Stack, the MC13193 functionality is the same as the MC13192.

When combined with an appropriate microcontroller MCU , the MC13192/MC13193 provide a cost-effective solution for short-range data links and networks. Interface with the MCU is accomplished using a four wire serial peripheral interface SPI connection and an interrupt request output which allows for the use of a variety of processors. The software and processor

Contents
1 Introduction 1 2 Features 2 3 Block Diagrams 4 Data Transfer Modes 5 Electrical Characteristics 7 6 Functional Description 11 7 Pin Connections 14 8 Applications Information 17 9 Packaging Information 23

Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Freescale Semiconductor, Inc., 2004, 2005, 2006, All rights reserved.
can be scaled to fit applications ranging from simple point-to-point systems, through complete ZigBee networking.

For more detailed information about MC13192/MC13192 operation, refer to the MC13192/MC13193 Reference Manual, MC13192RM .

Applications include, but are not limited to, the following
• Remote control and wire replacement in industrial systems such as wireless sensor networks
• Factory automation and motor control
• Energy Management lighting, HVAC, etc.
• Asset tracking and monitoring

Potential consumer applications include
• Home automation and control lighting, thermostats, etc.
• Human interface devices keyboard, mice, etc.
• Remote control
• Wireless toys

The transceiver includes a low noise amplifier, mW power amplifier PA , PLL with internal voltage controlled oscillator VCO , on-board power supply regulation, and full spread-spectrum encoding and decoding. The device supports 250 kbps Offset-Quadrature Phase Shift Keying O-QPSK data in MHz channels with MHz channel spacing per the Standard. The SPI port and interrupt request output are used for receive RX and transmit TX data transfer and control.
2 Features
• Supports 250 kbps O-QPSK data in MHz channels and full spread-spectrum encode and decode compatible with the Standard
• Operates on one of 16 selectable channels in the GHz band
• RX sensitivity of <-92 dBm typical at packet error rate
• 0 dBm nominal, programmable from -27 dBm to 4 dBm typical maximum output power
• Recommended power supply range to V
• Buffered transmit and receive data packets for simplified use with low cost MCUs
• Three power down modes for power conservation:
< 1 µA Off current 1 µA Typical Hibernate current 35 µA Typical Doze current no CLKO
• Four internal timer comparators available to supplement MCU resource
• Programmable frequency clock output CLKO for use by MCU
• Onboard trim capability for 16 MHz crystal reference oscillator eliminates need for external variable capacitors and allows for automated production frequency calibration.
• Seven general purpose input/output GPIO signals

Freescale Semiconductor
• Operating temperature range -40 °C to 85 °C
• Small form factor QFN-32 Package

RoHS compliant Meets moisture sensitivity level MSL 3 260 °C peak reflow temperature Meets lead-free requirements

Software Features

Freescale provides a wide range of software functionality to complement the MC13192/MC13193 hardware. There are three levels of application solutions:

Simple proprietary wireless connectivity. User networks built on the MAC standard. ZigBee-compliant network stack.

Simple MAC SMAC
• Small memory footprint about 3 Kbytes typical
• Supports point-to-point and star network configurations
• Proprietary networks
• Source code and application examples provided

Standard-Compliant MAC
• Supports star, mesh and cluster tree topologies
• Supports beaconed networks
• Supports GTS for low latency
• Multiple power saving modes idle doze, hibernate

ZigBee-Compliant Network Stack
• Supports ZigBee specification
• Supports star, mesh and tree networks
• Advanced Encryption Standard AES 128-bit security

Freescale Semiconductor

Block Diagrams
3 Block Diagrams

Figure 1 shows a simplified block diagram of the MC13192/MC13193 which is an Standard compatible transceiver that provides the functions required in the physical layer PHY specification.

MUX Correlator Symbol

Synch & Det SERIAL PERIPHERAL INTERFACE

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MC13193FC Datasheet file may be downloaded here without warranties.

Datasheet ID: MC13193FC 635472