DKSB1000C

DKSB1000C Datasheet

DKSB1000C

Part	Datasheet
DKSB1000C	DKSB1000C (pdf)

PDF Datasheet Preview
DKSB1000C PIC32 Breakout Board • External power connector • On board regulator • Header style pin-out • Power and ground available on some headers • Access to every pin from the PIC32 Starter Kit header 5 Nov 2009 Functional Description The PIC32 Breakout gives you access to most of the pins on the PIC32 Starter Kit’s 100 pin microcontroller. The on board regulator’s input range is 7-12VDC at 1A. The USB input voltage is protected by D2 on the PIC32 Starter Kit. Both voltage levels are available at several of the 20 pin connectors, as labeled. VDD voltage is supplied from the PIC32 Starter Kit’s regulator. Please check Microchip’s documentation for the current available from the PIC32 Starter Kit’s USB supplied power and VDD regulator. The silk screen numbering on the 20 pin headers J3-J8 matches the PIC32 Starter Kit’s pinout. Please see the schematic for details. A power supply is not included but is available from Digi-Key, such as part number AC162039-ND. The standard Microchip supply used by the ICD 2 can also be used to power the breakout board. The headers J3-J8 are available from Digi-Key, such as part number S2012E-10-ND. PIC32 Breakout Board Schematic Bill of Materials Ref Des C1,C2 587-1281-1-ND H11234-ND CP-102BH-ND MC7805BD2TR4GOSTR-ND Description 1uF Cerm Cap 25V 0805 CONN RECEPT 120POS W/O POST SMD CONN PWR JACK 2.5X5.5MM HIGH CUR IC REG VOLT POS 1A 5V D2PAK Manufacturer PN TMK212B7105KG-T FX10A-120S/12-SV 71 PJ-102BH MC7805BD2TR4G Digi-Key Corporation PIC32 Breakout Board Disclaimer This document is for informational use only and is subject to change without prior notice. Digi-Key makes no commitment to update or keep current the information contained herein. Digi-Key does not guarantee or warrant that any information provided is accurate, complete, or correct and disclaims any and all liability associated with the use of the information contained herein. The use of this information and Digi-Key’s liability is subject to Digi-Key’s standard Terms & Conditions which can be found at by clicking on the Terms & Conditions link at the bottom of the web page. No license, whether express, implied, arising by estoppel or otherwise is granted under any intellectual property or other rights of Digi-Key or others. DIGI-KEY MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO PRODUCT CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Digi-Key disclaims all liability arising from this information and its use. Use of Digi-Key devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Digi-Key from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Digi-Key intellectual property rights. Trademarks is a registered trademark of Digi-Key Corporation. All other trademarks, service marks and product names contained herein are the sole property of their respective owner and their use is for informational purposes only and does not imply any endorsement, recommendation, sponsorship or approval by the trademark owner of the contents. Copyright Use of this document is limited to customer’s internal business use for the evaluation and purchase of products. No permission is granted to the user to copy, print, store, distribute, transmit, display in public or modify the content of this document in any way for any other purpose. Copyright 2009 Digi-Key Corporation. All rights reserved. Digi-Key Corporation

PDF Datasheet Preview

DKSB1000C

PIC32 Breakout Board
• External power connector
• On board regulator
• Header style pin-out
• Power and ground available on some headers
• Access to every pin from the PIC32 Starter Kit header
5 Nov 2009

Functional Description

The PIC32 Breakout gives you access to most of the pins on the PIC32 Starter Kit’s 100 pin microcontroller.

The on board regulator’s input range is 7-12VDC at 1A. The USB input voltage is protected by D2 on the PIC32 Starter Kit. Both voltage levels are available at several of the 20 pin connectors, as labeled. VDD voltage is supplied from the PIC32 Starter Kit’s regulator. Please check Microchip’s documentation for the current available from the PIC32 Starter Kit’s USB supplied power and VDD regulator.

The silk screen numbering on the 20 pin headers J3-J8 matches the PIC32 Starter Kit’s pinout. Please see the schematic for details.

A power supply is not included but is available from Digi-Key, such as part number AC162039-ND. The standard Microchip supply used by the ICD 2 can also be used to power the breakout board.

The headers J3-J8 are available from Digi-Key, such as part number S2012E-10-ND.

PIC32 Breakout Board

Schematic

Bill of Materials

Ref Des

C1,C2 587-1281-1-ND

H11234-ND

CP-102BH-ND

MC7805BD2TR4GOSTR-ND

Description 1uF Cerm Cap 25V 0805 CONN RECEPT 120POS W/O POST SMD CONN PWR JACK 2.5X5.5MM HIGH CUR IC REG VOLT POS 1A 5V D2PAK

Manufacturer PN TMK212B7105KG-T FX10A-120S/12-SV 71 PJ-102BH MC7805BD2TR4G

Digi-Key Corporation

PIC32 Breakout Board

Disclaimer

This document is for informational use only and is subject to change without prior notice. Digi-Key makes no commitment to update or keep current the information contained herein. Digi-Key does not guarantee or warrant that any information provided is accurate, complete, or correct and disclaims any and all liability associated with the use of the information contained herein. The use of this information and Digi-Key’s liability is subject to Digi-Key’s standard Terms & Conditions which can be found at by clicking on the Terms & Conditions link at the bottom of the web page.

No license, whether express, implied, arising by estoppel or otherwise is granted under any intellectual property or other rights of Digi-Key or others.

DIGI-KEY MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO PRODUCT CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE.

Digi-Key disclaims all liability arising from this information and its use. Use of Digi-Key devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Digi-Key from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Digi-Key intellectual property rights.

Trademarks
is a registered trademark of Digi-Key Corporation. All other trademarks, service marks and product names contained herein are the sole property of their respective owner and their use is for informational purposes only and does not imply any endorsement, recommendation, sponsorship or approval by the trademark owner of the contents.

Copyright

Use of this document is limited to customer’s internal business use for the evaluation and purchase of products. No permission is granted to the user to copy, print, store, distribute, transmit, display in public or modify the content of this document in any way for any other purpose.

Copyright 2009 Digi-Key Corporation. All rights reserved.

Digi-Key Corporation

More datasheets: B65807J0160A087 | NANOUSB3_NE2D/GS/RS_ | M13092 SL005 | M13092 SL001 | M13092 SL002 | BDW23-S | BDW23C-S | BDW23A-S | T0053426699N | 2090135203

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DKSB1000C Datasheet file may be downloaded here without warranties.

Datasheet ID: DKSB1000C 515490