NANOUSB3_NE2D/GS/RS_
NANOUSB3_NE2D/GS/RS_ Datasheet
NanoUSB3 Evaluation Kit for NanEye
| Part | Datasheet |
|---|---|
NANOUSB3_NE2D/GS/RS_ |
NANOUSB3_NE2D/GS/RS_ (pdf) |
| PDF Datasheet Preview |
|---|
| CMOSIS / AWAIBA is now Member of the ams Group The technical content of this CMOSIS / AWAIBA document is still valid. Contact information: Headquarters ams AG Tobelbader Strasse 30 8141 Premstaetten, Austria Tel +43 0 3136 500 0 e-Mail: Please visit our website at NanoUSB3 Evaluation Kit for NanEye NanoUSB3 Evaluation Kit for NanEye Version Date 27/10/16 02/03/17 Modifications Updated NanEye FlexPCB connector mechanical drawing Updated sections 2 and Author Baptista Date 02/03/17 Version Page 2/14 NanoUSB3 Evaluation Kit for NanEye Table of Contents 1 Overview 2 USB3 Evaluation 3 Operating Recommended Equipment Basic operational instructions Connect NanEye Sensor 4 Evaluation 5 How to Install Awaiba How to Start Awaiba Viewer How to Use NanEye Awaiba Viewer How to Debug USB3 board Index of Figures Figure 1 NanEye Evaluation Figure 2 NanEye interface Figure 3 FPGA USB3 board functional Diagram Figure 4:Connecting NanEye on NanoUSB3 Adapter Figure 5 NanEye Flex standard connector. If not otherwise noted all tolerances are +/- Figure 6 NanEye Flex PCB connector. If not otherwise noted all tolerances are +/- Figure 7 Start the Figure 8 Start the Viewer with the sensor connected on the J3 connector, for Figure 9 FPGA Configuration for Figure10 NanEye USB3 Endpoints Figure 11 Streamer example data from endpoint Date 02/03/17 Version Page 3/14 NanoUSB3 Evaluation Kit for NanEye NanEye 2D is a tiny camera module with a footprint size of 1mm x 1mm and, optionally, adapted miniature optics. The sensor provides a high sensitivity rolling shutter pixel, frame rate up to 60Fps and a 10 bit digital LVDS. The device is mounted on a flat ribbon cable measuring up to 3m in length. Other cable lengths, up to 3m are possible upon request. The supplied viewer software allows to display the images from the sensor on a screen and also manipulate the sensor registers. It also has the possibility to run up to 4 NanEye's at the same time. Figure 1 NanEye Evaluation Kit Date 02/03/17 Version Page 4/14 NanoUSB3 Evaluation Kit for NanEye 2 USB3 Evaluation Board The evaluation kit is composed of two boards, one with the FPGA and USB3 interface and another for the specific NanEye sensor. Figure 2 NanEye interface board Legend A1 - Connector J1 A2 - Connector J2 B - GPIO 1 - FVAL Sensor 1 2 - FVAL Sensor 2 C - JTAG Connection D - USB3 plug |
| More datasheets: ASMT-CR00 | IR958-8P | CMLD6263S BK TIN/LEAD | 13907 | AIMB-766VG-00A2E | AIMB-766G2-00A2E | 87610340 | 15-000673 | IRM-8753K-1 | B65807J0160A087 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived NANOUSB3_NE2D/GS/RS_ Datasheet file may be downloaded here without warranties.