15-000673

15-000673 Datasheet

PLATING SEE PART NO Q PLEASE ADD 1 for 30in HARD GOLD over min. 50in NICKEL Q PLEASE ADD 3 for 8in HARD GOLD over min. 50in NICKEL SOLDER CUP ACCEPTS CABLE AWG 22 HEXLOCKING SCREWS STAINLESS STEEL RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max.67Ncm 6 in.LB CONNECTOR IS PART MARKED 15-00067Q CONEC ABC

Part	Datasheet
15-000673	15-000673 (pdf)

PDF Datasheet Preview
RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 IP RATING IP 67 SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER SOLDERING METALSHELL ZINC DIE CAST min. 50 in NICKEL PLATING over COPPER INSULATORS PBT GF UL 94 V-0, BLACK D O-RING SILICONE PER ASTM D2000 70 SHORE A RUBBER GASKET TPE SEALING COMPOUND EPOXY RESIN UL 94 V-0 BLACK CONTACTS COPPER ALLOY PLATING SEE PART NO Q PLEASE ADD 1 for 30in HARD GOLD over min. 50in NICKEL Q PLEASE ADD 3 for 8in HARD GOLD over min. 50in NICKEL SOLDER CUP ACCEPTS CABLE AWG 22 HEXLOCKING SCREWS STAINLESS STEEL RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max.67Ncm 6 in.LB CONNECTOR IS PART MARKED 15-00067Q CONEC ABC 12,1 +0,4 - 0,3 +0,4 - 0,3 P1,04 44x 5:1 + 0,25 -0 +0 - 0,3 5,99 POS. 1 POS. 16 POS. 31 61,4 +0,3 -0 47,04 B0,13 38,86 +0,23 - 0,02 8,23 +0,25 -0 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR +0,3 -0 21,1 O-RING 4-40 UNC 15-00067Q CONEC ABC SEE NOTE 13 SEALING COMPOUND 4,6 9,4 4-40 UNC SW 4,8 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. Directive 2002/95/EC RoHS compliant THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE A NAME:

PDF Datasheet Preview

RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 IP RATING IP 67 SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI

FOR 30 MINUTES AFTER SOLDERING METALSHELL ZINC DIE CAST min. 50 in NICKEL PLATING over COPPER

INSULATORS PBT GF UL 94 V-0, BLACK D O-RING SILICONE PER ASTM D2000 70 SHORE A RUBBER GASKET TPE SEALING COMPOUND EPOXY RESIN UL 94 V-0 BLACK CONTACTS COPPER ALLOY

PLATING SEE PART NO Q PLEASE ADD 1 for 30in HARD GOLD over min. 50in NICKEL Q PLEASE ADD 3 for 8in HARD GOLD over min. 50in NICKEL SOLDER CUP ACCEPTS CABLE AWG 22 HEXLOCKING SCREWS STAINLESS STEEL RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max.67Ncm 6 in.LB CONNECTOR IS PART MARKED 15-00067Q CONEC ABC
12,1
+0,4 - 0,3
+0,4 - 0,3

P1,04 44x 5:1
+ 0,25 -0
+0 - 0,3
5,99

POS. 1 POS. 16

POS. 31
61,4
+0,3 -0
47,04 B0,13
38,86
+0,23 - 0,02
8,23
+0,25 -0

RUBBER GASKET

PLACED ON TOP SURFACE

OF MALE INSULATOR
+0,3 -0
21,1

O-RING
4-40 UNC
15-00067Q CONEC ABC

SEE NOTE 13

SEALING COMPOUND
4,6 9,4
4-40 UNC

SW 4,8

AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD.

Directive 2002/95/EC RoHS compliant

THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH

DO NOT ALTER CAD DRAWING BY HAND

APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION

APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL

CUSTOMER APPROVAL DATE A

NAME:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 15-000673 Datasheet file may be downloaded here without warranties.

Datasheet ID: 15-000673 506505