ZPM3570-E

ZPM3570-E Datasheet

ZPM3570 ZigBee Pro Module

Part	Datasheet
ZPM3570-E	ZPM3570-E (pdf)

Related Parts	Information
ZPM3570-C	ZPM3570-C
ZPM3570DK	ZPM3570DK

PDF Datasheet Preview
ZPM3570 ZigBee Pro Module Data Sheet 2011 by RF Monolithics, Inc. Technical support E-mail: Page 1 of 18 ZPM3570 Data Sheet - 05/25/11 Table of Contents 1 System Description 4 Module 4 Block 4 Acronyms 5 2 Mechanical Specifications 5 Module Dimensions 5 Module Outline Drawing 5 Module Bottom 6 Detailed Mechanical Data Top View 6 Module Pin Out 7 3 DC Electrical 8 Typical Power Consumption 8 Digital IO Specifications 8 4 RF Specifications 9 5 Environmental 9 Absolute Maximum Ratings 9 Recommended Operating Conditions 9 6 Application Information 10 Connection Reference for the UART Host Interface 10 Connection Reference for the SPI Host Interface 10 Recommended Host Customer Circuit Board PCB Land 11 Host PCB Layout Recommendations 12 Module Location 13 Location in x-y Plane 13 Location in z Plane 14 7 Assembly Information 14 Lead-free Reflow Soldering Profile 14 8 Package Information 15 Tape and Reel Specifications 15 9 Ordering Information 16 10 RoHS Declaration 16 11 Regulatory Information 16 FCC Notice USA 16 FCC Labeling Requirements 17 RF Exposure 17 IC Notice 17 CE Notice EUROPE 18 12 Technical Support Contact 18 13 18 2011 by RF Monolithics, Inc. Technical support E-mail: Page 2 of 18 ZPM3570 Data Sheet - 05/25/11 List of Figures Figure 1 ZPM3750 Module Block 4 Figure 2 Module Top and Side 5 Figure 3 Module Bottom 6 Figure 4 Detailed Mechanical Data Top View 6 Figure 5 UART Host Interface Reference Diagram 10 Figure 6 SPI Host Interface Reference Diagram 10 Figure 7 Recommended Host Customer PCB 11 Figure 8 Recommended Host Circuit Board Design Underneath the 12 Figure 9 Recommended Locations in x-y 13 Figure 10 Locations Not Recommended in x-y Plane 13 Figure 11 Recommended Locations in z 14 Figure 12 Locations not Recommended IN x-y Plane 14 Figure 13 Recommended Solder Reflow Profile 15 Figure 14 Tape 15 2011 by RF Monolithics, Inc. Technical support E-mail: Page 3 of 18 ZPM3570 Data Sheet - 05/25/11 1 System Description RFM’s ZPM3750 module is a standards-based wireless transceiver designed for Smart Energy and other short range wireless markets that require low power consumption, high transmit power 20 dBm typical and high receiver sensitivity -103 dBm . The ZPM3750 is based upon the IEEE wireless network specification and includes the ZigBee PRO stack. The module can be used to develop applications supporting the ZigBee PRO Smart Energy and Home Automation application profiles. The ZPM3750 module operates in the GHz unlicensed ISM frequency band for worldwide deployment. Module Summary • Dimensions x mm • Ember EM357 high-performance, integrated ZigBee/802.15.4 chipset • Supply voltage to V • Data logging memory 8 Mbits serial flash • Security 128-bit AES • Antenna on-module • Host Interface SPI, UART • Meter interface I2C, GPIO • ADC ports 6 x 14-bit • RoHS compliant • MSL JEDEC level 3 Block Diagram Figure 1 - ZPM3750 Module Block Diagram 2011 by RF Monolithics, Inc. Technical support E-mail: Page 4 of 18 ZPM3570 Data Sheet - 05/25/11 Acronyms ADC Analog to Digital Converter AMR Automatic Meter Reading GPIO General-Purpose Input-Output I2C Intelligent Interface Controller ISM Industrial, Scientific and Medical MAC Medium Access Control MSL Moisture Sensitivity Level PER Packet Error Rate ROHS Restriction of Hazardous Substances SPI Serial Peripheral Interface UART Universal Asynchronous Receiver-Transmitter WPAN Wireless Personal Area Network 2 Mechanical Specifications Module Dimensions Parameter Dimensions L x W x H Dimensional Tolerances L, W, H Typical x Module Top and Side View Units mm Figure 2 - ZMP3570 Outline Drawing 2011 by RF Monolithics, Inc. Technical support E-mail: Page 5 of 18 ZPM3570 Data Sheet - 05/25/11 Module Bottom View Figure 3 - ZMP3570 Bottom View Detailed Mechanical Data Top View Figure 4 - Detailed Mechanical Data top view 2011 by RF Monolithics, Inc. Technical support E-mail: Page 6 of 18 ZPM3570 Data Sheet - 05/25/11 Module Pin Out Name - Ground Reserved 9 Ordering Information Module ZPM3570 Development Kit ZPM3570DK 10 RoHS Declaration Given supplier declarations, this product does not contain substances that are banned by Directive 2002/95/EC or contains a maximum concentration of by weight in homogeneous materials for • Lead and lead compounds • Mercury and mercury compounds • Chromium VI • PBB polybrominated biphenyl • PBDE polybrominated biphenyl ether And a maximum concentration of by weight in homogeneous materials for • Cadmium and cadmium compounds 11 Regulatory Information ZPM3750 has obtained the certifications described below. FCC Notice USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions 1 this device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. The FCC requires the user to be notified that any changes or modifications not expressly approved by RFM, Inc. may void the user’s authority to operate the equipment. While an application of the ZPM3570 module in a product is not required to obtain a new FCC authorization for the module, this does not preclude the possibility that some other form of authorization or testing may be required for that end product. This device using the integrated antenna has been tested to comply with FCC CFR Part The device meets the requirements for modular transmitter approval as detailed in the FCC public notice DA00.1407.transmitter, given the following considerations: • Maximum output power for the channels as defined by IEEE [1] must be set to the value below using emberSetRadioPower or equivalent under NORMAL mode as specified in - For channels 11 to 24, the value of -11 - For channel 25, the value of -17 - For channel 26, the value of -27 • Duty cycle of 67% allowed. • The firmware disables power out if the source voltage is greater than V. • VBATT must be between and V. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 2011 by RF Monolithics, Inc. Technical support E-mail: Page 16 of 18 ZPM3570 Data Sheet - 05/25/11 installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help. FCC Labeling Requirements When integrating the ZPM3750 into a product the FCC labeling requirements must be met. This includes a clearly visible label on the outside of the finished product specifying the ZPM3750 FCC identifier FCC ID QPU3020 as well as the notice above. The exterior label can use wording such as “Contains Transmitter Module FCC ID QPU3020” or “Contains FCC ID QPU3020” although any similar wording that expresses the same meaning may be used. RF Exposure This module has been certified for remote and base radio applications and is not intended to be operated within 20 cm of the body. If the module will be used for portable applications, the device must undergo SAR testing. The following statement must be included as a CAUTION statement in manuals for the products to alert users on FCC RF exposure compliance: “WARNING To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer distances than this are not recommended.” IC Notice Canada The term “IC” before the certification/registration number only signifies that the Industry Canada technical specifications were met. Le terme “IC” devant le numéro de certification /d’enregistrement signifie seulement que les spécifications techniques Industrie Canada ont été respectées. This device complies with Industry Canada license-exempt RSS standard s . Operation is subject to The following two conditions 1 this device may not cause interference, and 2 this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence s . Son utilisation est soumise à Les deux conditions suivantes 1 cet appareil ne peut pas provoquer d'interférences et 2 cet appareil doit accepter Toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. This device complies with Health Canada’s Safety Code 6 / IC RSS-210. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada’s requirement. Information can be obtained at: 2011 by RF Monolithics, Inc. Technical support E-mail: Page 17 of 18 ZPM3570 Data Sheet - 05/25/11 Cet appareil est conforme avec Santé Canada Code de sécurité 6 / IC RSS-210. Le programme d'installation de cet appareil doit s'assurer que les rayonnements RF n'est pas émis au-delà de l'exigence de Santé Canada. Les informations peuvent obtenues: The host device should be properly labeled to identify the module within the host device. The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labeled to display the Industry Canada certification number of the module, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar wording expressing the same meaning, as follows Contains transmitter module IC:4523A-ZPM3750 where 4523AZPM3750 is the module’s certification number. CE Notice Europe This device has been tested and certified for use in the European Union. If this device is used in a product, the OEM has responsibility to verify compliance of the final product to the EU standards. A Declaration of Conformity must be issued and kept on file as described in Annex II of the Radio and Telecommunications Terminal Equipment Directive. The ‘CE’ mark must be placed on the OEM product per the labeling requirements of the Directive. Given that the operating frequency band is not harmonized by a few European countries, the restriction or alert sign must be placed along side the ‘CE’ mark as shown below. As of the date of this document, only France has a restriction. The restriction is that, if the radio is operated outdoors in the MHz band, the power must be limited to 10 mW instead of 100 mW. The OEM must account for this and the product must have the alert mark. It does not require country notifications, however. 12 Technical Support Contact For technical support call RFM at +1 678 684-2000 between the hours of 8:30 AM and 5:30 PM US Eastern Time, or E-mail 13 References

PDF Datasheet Preview

ZPM3570 ZigBee Pro Module

Data Sheet
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 1 of 18 ZPM3570 Data Sheet - 05/25/11

Table of Contents
1 System Description 4 Module 4 Block 4 Acronyms 5 2 Mechanical Specifications 5 Module Dimensions 5 Module Outline Drawing 5 Module Bottom 6 Detailed Mechanical Data Top View 6 Module Pin Out 7 3 DC Electrical 8 Typical Power Consumption 8 Digital IO Specifications 8 4 RF Specifications 9 5 Environmental 9 Absolute Maximum Ratings 9 Recommended Operating Conditions 9 6 Application Information 10 Connection Reference for the UART Host Interface 10 Connection Reference for the SPI Host Interface 10 Recommended Host Customer Circuit Board PCB Land 11 Host PCB Layout Recommendations 12 Module Location 13 Location in x-y Plane 13 Location in z Plane 14 7 Assembly Information 14 Lead-free Reflow Soldering Profile 14 8 Package Information 15 Tape and Reel Specifications 15 9 Ordering Information 16 10 RoHS Declaration 16 11 Regulatory Information 16 FCC Notice USA 16 FCC Labeling Requirements 17 RF Exposure 17 IC Notice 17 CE Notice EUROPE 18 12 Technical Support Contact 18 13 18
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 2 of 18 ZPM3570 Data Sheet - 05/25/11

List of Figures

Figure 1 ZPM3750 Module Block 4 Figure 2 Module Top and Side 5 Figure 3 Module Bottom 6 Figure 4 Detailed Mechanical Data Top View 6 Figure 5 UART Host Interface Reference Diagram 10 Figure 6 SPI Host Interface Reference Diagram 10 Figure 7 Recommended Host Customer PCB 11 Figure 8 Recommended Host Circuit Board Design Underneath the 12 Figure 9 Recommended Locations in x-y 13 Figure 10 Locations Not Recommended in x-y Plane 13 Figure 11 Recommended Locations in z 14 Figure 12 Locations not Recommended IN x-y Plane 14 Figure 13 Recommended Solder Reflow Profile 15 Figure 14 Tape 15
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 3 of 18 ZPM3570 Data Sheet - 05/25/11
1 System Description

RFM’s ZPM3750 module is a standards-based wireless transceiver designed for Smart Energy and other short range wireless markets that require low power consumption, high transmit power 20 dBm typical and high receiver sensitivity -103 dBm . The ZPM3750 is based upon the IEEE wireless network specification and includes the ZigBee PRO stack. The module can be used to develop applications supporting the ZigBee PRO Smart Energy and Home Automation application profiles. The ZPM3750 module operates in the GHz unlicensed ISM frequency band for worldwide deployment.

Module Summary
• Dimensions x mm
• Ember EM357 high-performance, integrated ZigBee/802.15.4 chipset
• Supply voltage to V
• Data logging memory 8 Mbits serial flash
• Security 128-bit AES
• Antenna on-module
• Host Interface SPI, UART
• Meter interface I2C, GPIO
• ADC ports 6 x 14-bit
• RoHS compliant
• MSL JEDEC level 3

Block Diagram

Figure 1 - ZPM3750 Module Block Diagram
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 4 of 18 ZPM3570 Data Sheet - 05/25/11

Acronyms

ADC Analog to Digital Converter AMR Automatic Meter Reading GPIO General-Purpose Input-Output I2C Intelligent Interface Controller ISM Industrial, Scientific and Medical MAC Medium Access Control MSL Moisture Sensitivity Level PER Packet Error Rate ROHS Restriction of Hazardous Substances SPI Serial Peripheral Interface UART Universal Asynchronous Receiver-Transmitter WPAN Wireless Personal Area Network
2 Mechanical Specifications

Module Dimensions

Parameter Dimensions L x W x H Dimensional Tolerances L, W, H

Typical x

Module Top and Side View

Units mm

Figure 2 - ZMP3570 Outline Drawing
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 5 of 18 ZPM3570 Data Sheet - 05/25/11

Module Bottom View

Figure 3 - ZMP3570 Bottom View

Detailed Mechanical Data Top View

Figure 4 - Detailed Mechanical Data top view
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 6 of 18 ZPM3570 Data Sheet - 05/25/11

Module Pin Out

Name
- Ground

Reserved
9 Ordering Information

Module ZPM3570 Development Kit ZPM3570DK
10 RoHS Declaration

Given supplier declarations, this product does not contain substances that are banned by Directive 2002/95/EC or contains a maximum concentration of by weight in homogeneous materials for
• Lead and lead compounds
• Mercury and mercury compounds
• Chromium VI
• PBB polybrominated biphenyl
• PBDE polybrominated biphenyl ether And a maximum concentration of by weight in homogeneous materials for
• Cadmium and cadmium compounds
11 Regulatory Information

ZPM3750 has obtained the certifications described below.

FCC Notice USA

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions 1 this device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation.

The FCC requires the user to be notified that any changes or modifications not expressly approved by RFM, Inc. may void the user’s authority to operate the equipment. While an application of the ZPM3570 module in a product is not required to obtain a new FCC authorization for the module, this does not preclude the possibility that some other form of authorization or testing may be required for that end product.

This device using the integrated antenna has been tested to comply with FCC CFR Part The device meets the requirements for modular transmitter approval as detailed in the FCC public notice DA00.1407.transmitter, given the following considerations:
• Maximum output power for the channels as defined by IEEE [1] must be set to the value below using emberSetRadioPower or equivalent under NORMAL mode as specified in
- For channels 11 to 24, the value of -11 - For channel 25, the value of -17 - For channel 26, the value of -27
• Duty cycle of 67% allowed.
• The firmware disables power out if the source voltage is greater than V.
• VBATT must be between and V.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 16 of 18 ZPM3570 Data Sheet - 05/25/11
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.

FCC Labeling Requirements

When integrating the ZPM3750 into a product the FCC labeling requirements must be met. This includes a clearly visible label on the outside of the finished product specifying the ZPM3750 FCC identifier FCC ID QPU3020 as well as the notice above. The exterior label can use wording such as “Contains Transmitter Module FCC ID QPU3020” or “Contains FCC ID QPU3020” although any similar wording that expresses the same meaning may be used.

RF Exposure

This module has been certified for remote and base radio applications and is not intended to be operated within 20 cm of the body. If the module will be used for portable applications, the device must undergo SAR testing.

The following statement must be included as a CAUTION statement in manuals for the products to alert users on FCC RF exposure compliance:
“WARNING To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer distances than this are not recommended.”

IC Notice Canada

The term “IC” before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Le terme “IC” devant le numéro de certification /d’enregistrement signifie seulement que les spécifications techniques Industrie Canada ont été respectées.

This device complies with Industry Canada license-exempt RSS standard s . Operation is subject to The following two conditions 1 this device may not cause interference, and 2 this device must accept any interference, including interference that may cause undesired operation of the device.

Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence s . Son utilisation est soumise à Les deux conditions suivantes 1 cet appareil ne peut pas provoquer d'interférences et 2 cet appareil doit accepter Toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.

This device complies with Health Canada’s Safety Code 6 / IC RSS-210. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada’s requirement. Information can be obtained at:
2011 by RF Monolithics, Inc.

Technical support E-mail:

Page 17 of 18 ZPM3570 Data Sheet - 05/25/11

Cet appareil est conforme avec Santé Canada Code de sécurité 6 / IC RSS-210. Le programme d'installation de cet appareil doit s'assurer que les rayonnements RF n'est pas émis au-delà de l'exigence de Santé Canada. Les informations peuvent obtenues:

The host device should be properly labeled to identify the module within the host device. The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labeled to display the Industry Canada certification number of the module, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar wording expressing the same meaning, as follows Contains transmitter module IC:4523A-ZPM3750 where 4523AZPM3750 is the module’s certification number.

CE Notice Europe

This device has been tested and certified for use in the European Union. If this device is used in a product, the OEM has responsibility to verify compliance of the final product to the EU standards. A Declaration of Conformity must be issued and kept on file as described in Annex II of the Radio and Telecommunications Terminal Equipment Directive.

The ‘CE’ mark must be placed on the OEM product per the labeling requirements of the Directive. Given that the operating frequency band is not harmonized by a few European countries, the restriction or alert sign must be placed along side the ‘CE’ mark as shown below. As of the date of this document, only France has a restriction. The restriction is that, if the radio is operated outdoors in the MHz band, the power must be limited to 10 mW instead of 100 mW. The OEM must account for this and the product must have the alert mark. It does not require country notifications, however.
12 Technical Support Contact

For technical support call RFM at +1 678 684-2000 between the hours of 8:30 AM and 5:30 PM US Eastern Time, or E-mail
13 References

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ZPM3570-E Datasheet file may be downloaded here without warranties.

Datasheet ID: ZPM3570-E 523107