AT49BV160CT-70TU

AT49BV160CT-70TU Datasheet

The AT49BV160C T is a 2.7-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each. The memory is divided into 39 sectors for erase operations. The device is offered in a 48-lead TSOP and a 46-ball CBGA package. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single power supply, making it ideally suited for in-system programming.

Part	Datasheet
AT49BV160CT-70TU	AT49BV160CT-70TU (pdf)

Related Parts	Information
AT49BV160CT-70TI	AT49BV160CT-70TI
AT49BV160C-70TI	AT49BV160C-70TI
AT49BV160C-70CI	AT49BV160C-70CI
AT49BV160CT-70CI	AT49BV160CT-70CI
AT49BV160CT-70CU	AT49BV160CT-70CU
AT49BV160C-70TU	AT49BV160C-70TU

PDF Datasheet Preview
• Single Voltage Read/Write Operation 2.65V to 3.6V • Access Time 70 ns • Sector Erase Architecture Thirty-one 32K Word 64K Bytes Sectors with Individual Write Lockout Eight 4K Word 8K Bytes Sectors with Individual Write Lockout • Fast Word Program Time 12 µs • Fast Sector Erase Time 300 ms • Suspend/Resume Feature for Erase and Program Supports Reading and Programming from Any Sector by Suspending Erase of a Different Sector Supports Reading Any Word by Suspending Programming of Any Other Word • Low-power Operation 12 mA Active 13 µA Standby • VPP Pin for Write Protection • WP Pin for Sector Protection • RESET Input for Device Initialization • Flexible Sector Protection • TSOP and CBGA Package Options • Top or Bottom Boot Block Configuration Available • 128-bit Protection Register • Minimum 100,000 Erase Cycles • Common Flash Interface CFI • Green Pb/Halide-free Packaging Option The AT49BV160C T is a 2.7-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each. The memory is divided into 39 sectors for erase operations. The device is offered in a 48-lead TSOP and a 46-ball CBGA package. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single power supply, making it ideally suited for in-system programming. The device powers on in the read mode. Command sequences are used to place the device in other operation modes such as program and erase. The device has the capability to protect the data in any sector see “Flexible Sector Protection” on page To increase the flexibility of the device, it contains an Erase Suspend and Program Suspend feature. This feature will put the erase or program on hold for any amount of time and let the user read data from or program data to any of the remaining sectors within the memory. The VPP pin provides data protection. When the VPP input is below 0.4V, the program and erase functions are inhibited. When VPP is at 1.5V or above, normal program and erase operations can be performed. 16-megabit 1M x 16 3-volt Only Flash Memory AT49BV160C AT49BV160CT Not Recommended for New Design Contact Atmel to discuss the latest design in trends and options Pin Configurations Pin Name A0 - A19 CE OE WE RESET VPP I/O0 - I/O15 NC VCCQ WP TSOP Top View Type 1 CBGA Top View Ball Down Function Addresses Chip Enable Output Enable Write Enable Reset Write Protection Data Inputs/Outputs No Connect Output Power Supply Write Protect A15 1 A14 2 A13 3 A12 4 A11 5 A10 6 A9 7 A8 8 NC 9 NC 10 WE 11 RESET 12 VPP 13 WP 14 A19 15 A18 16 A17 17 A7 18 A6 19 A5 20 A4 21 A3 22 A2 23 A1 24 48 A16 47 VCCQ 46 GND 45 I/O15 44 I/O7 43 I/O14 42 I/O6 41 I/O13 40 I/O5 39 I/O12 38 I/O4 37 VCC 36 I/O11 35 I/O3 34 I/O10 33 I/O2 32 I/O9 31 I/O1 30 I/O8 29 I/O0 28 OE 27 GND 26 CE 25 A0 1 2 3 4 5 6 78 A13 A11 A8 VPP WP A19 A7 A4 A14 A10 WE RST A18 A17 A5 A2 A15 A12 A9 A6 A3 A1 A16 I/O14 I/O5 I/O11 I/O2 I/O8 CE A0 VCCQ I/O15 I/O6 I/O12 I/O3 I/O9 I/O0 GND GND I/O7 I/O13 I/O4 VCC I/O10 I/O1 OE 2 AT49BV160C T Block Diagram I/O0 - I/O15 AT49BV160C T OUTPUT BUFFER INPUT BUFFER A0 - A19 INPUT BUFFER ADDRESS LATCH Y-DECODER X-DECODER IDENTIFIER REGISTER STATUS REGISTER DATA COMPARATOR Y-GATING Ordering Information Standard Package tACC ICC mA Active Standby Ordering Code AT49BV160C-70CI AT49BV160C-70TI AT49BV160CT-70CI AT49BV160CT-70TI Green Package Option Pb/Halide-free tACC ICC mA Active Standby Ordering Code AT49BV160C-70TU AT49BV160CT-70CU AT49BV160CT-70TU AT49BV160C T Package 46C3 48T 46C3 48T Operation Range Industrial -40° to 85°C Industrial -40° to 85°C Package 46C3 48T Operation Range Industrial -40° to 85°C Industrial -40° to 85°C 46C3 48T Package Type 46-ball, Plastic Chip-Size Ball Grid Array Package CBGA 48-lead, Plastic Thin Small Outline Package TSOP Packaging Information 46C3 CBGA E A1 BALL ID TOP VIEW A B C D E F 8 7 6 5 4 3 21 b BOTTOM VIEW SIDE VIEW A1 BALL CORNER REF COMMON DIMENSIONS Unit of Measure = mm SYMBOL E E1 D D1 A A1 e b NOM TYP BSC TYP NOTE TITLE 2325 Orchard Parkway 46C3, 46-ball 8 x 6 Array ,0.75 mm Pitch, x mm R San Jose, CA 95131 Chip-scale Ball Grid Array Package CBGA 7/2/03 46C3 28 AT49BV160C T 48T TSOP PIN 1 AT49BV160C T 0º ~ 8º c Pin 1 Identifier SEATING PLANE GAGE PLANE This package conforms to JEDEC reference MO-142, Variation DD. Dimensions D1 and E do not include mold protrusion. Allowable

PDF Datasheet Preview

• Single Voltage Read/Write Operation 2.65V to 3.6V
• Access Time 70 ns
• Sector Erase Architecture

Thirty-one 32K Word 64K Bytes Sectors with Individual Write Lockout Eight 4K Word 8K Bytes Sectors with Individual Write Lockout
• Fast Word Program Time 12 µs
• Fast Sector Erase Time 300 ms
• Suspend/Resume Feature for Erase and Program Supports Reading and Programming from Any Sector by Suspending Erase
of a Different Sector Supports Reading Any Word by Suspending Programming of Any Other Word
• Low-power Operation 12 mA Active 13 µA Standby
• VPP Pin for Write Protection
• WP Pin for Sector Protection
• RESET Input for Device Initialization
• Flexible Sector Protection
• TSOP and CBGA Package Options
• Top or Bottom Boot Block Configuration Available
• 128-bit Protection Register
• Minimum 100,000 Erase Cycles
• Common Flash Interface CFI
• Green Pb/Halide-free Packaging Option

The AT49BV160C T is a 2.7-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each. The memory is divided into 39 sectors for erase operations. The device is offered in a 48-lead TSOP and a 46-ball CBGA package. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single power supply, making it ideally suited for in-system programming.

The device powers on in the read mode. Command sequences are used to place the device in other operation modes such as program and erase. The device has the capability to protect the data in any sector see “Flexible Sector Protection” on page

To increase the flexibility of the device, it contains an Erase Suspend and Program Suspend feature. This feature will put the erase or program on hold for any amount of time and let the user read data from or program data to any of the remaining sectors within the memory.

The VPP pin provides data protection. When the VPP input is below 0.4V, the program and erase functions are inhibited. When VPP is at 1.5V or above, normal program and erase operations can be performed.
16-megabit 1M x 16 3-volt Only Flash Memory

AT49BV160C AT49BV160CT

Not Recommended for New Design

Contact Atmel to discuss the latest design in trends and options

Pin Configurations

Pin Name A0 - A19 CE OE WE RESET VPP I/O0 - I/O15 NC VCCQ WP

TSOP Top View Type 1

CBGA Top View Ball Down

Function Addresses Chip Enable Output Enable Write Enable Reset Write Protection Data Inputs/Outputs No Connect Output Power Supply Write Protect

A15 1 A14 2 A13 3 A12 4 A11 5 A10 6

A9 7 A8 8 NC 9 NC 10 WE 11 RESET 12 VPP 13 WP 14 A19 15 A18 16 A17 17 A7 18 A6 19 A5 20 A4 21 A3 22 A2 23 A1 24
48 A16 47 VCCQ 46 GND 45 I/O15 44 I/O7 43 I/O14 42 I/O6 41 I/O13 40 I/O5 39 I/O12 38 I/O4 37 VCC 36 I/O11 35 I/O3 34 I/O10 33 I/O2 32 I/O9 31 I/O1 30 I/O8 29 I/O0 28 OE 27 GND 26 CE 25 A0
1 2 3 4 5 6 78

A13 A11 A8 VPP WP A19 A7 A4

A14 A10 WE RST A18 A17 A5 A2

A15 A12 A9

A6 A3 A1

A16 I/O14 I/O5 I/O11 I/O2 I/O8 CE A0

VCCQ I/O15 I/O6 I/O12 I/O3 I/O9 I/O0 GND

GND I/O7 I/O13 I/O4 VCC I/O10 I/O1 OE
2 AT49BV160C T

Block Diagram

I/O0 - I/O15

AT49BV160C T

OUTPUT BUFFER

INPUT BUFFER

A0 - A19

INPUT BUFFER

ADDRESS LATCH

Y-DECODER X-DECODER

IDENTIFIER REGISTER

STATUS REGISTER

DATA COMPARATOR

Y-GATING
Ordering Information

Standard Package
tACC

ICC mA

Active

Standby
Ordering Code AT49BV160C-70CI AT49BV160C-70TI AT49BV160CT-70CI AT49BV160CT-70TI

Green Package Option Pb/Halide-free
tACC

ICC mA

Active

Standby
Ordering Code

AT49BV160C-70TU

AT49BV160CT-70CU AT49BV160CT-70TU

AT49BV160C T

Package 46C3 48T 46C3 48T

Operation Range Industrial
-40° to 85°C Industrial
-40° to 85°C

Package
46C3 48T

Operation Range Industrial
-40° to 85°C Industrial
-40° to 85°C
46C3 48T

Package Type 46-ball, Plastic Chip-Size Ball Grid Array Package CBGA 48-lead, Plastic Thin Small Outline Package TSOP

Packaging Information
46C3 CBGA

E A1 BALL ID

TOP VIEW

A B C D E F
8 7 6 5 4 3 21
b BOTTOM VIEW

SIDE VIEW

A1 BALL CORNER REF

COMMON DIMENSIONS Unit of Measure = mm

SYMBOL E E1 D D1 A A1 e b

NOM TYP

BSC TYP

NOTE

TITLE 2325 Orchard Parkway 46C3, 46-ball 8 x 6 Array ,0.75 mm Pitch, x mm R San Jose, CA 95131 Chip-scale Ball Grid Array Package CBGA
7/2/03
46C3
28 AT49BV160C T
48T TSOP

PIN 1

AT49BV160C T
0º ~ 8º c

Pin 1 Identifier

SEATING PLANE

GAGE PLANE

This package conforms to JEDEC reference MO-142, Variation DD. Dimensions D1 and E do not include mold protrusion. Allowable

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT49BV160CT-70TU Datasheet file may be downloaded here without warranties.

Datasheet ID: AT49BV160CT-70TU 518663