2002180300

2002180300 Datasheet

Modular Crimp Head Order No. 2002180370

Part	Datasheet
2002180300	2002180300 (pdf)

PDF Datasheet Preview
Hand Crimp Tool for 1.25mm Pitch Wire-to-Board Crimp Terminals Modular Crimp Head Order No. 2002180370 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 2002180300 A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles with simple contact positioning Easy handling due to outstanding force ratio Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100, accompanied by Air Powered Crimp Adapter Order No. Can also be used in the Battery Powered Tool Order No.63816-0200 110 V or 63816-0250 220 V , accompanied by Battery Powered Crimp Adapter Order No. SCOPE Products 1.25mm Pitch Wire-to-Board Crimp Terminal, 26-30 AWG, UL1061 wire. Terminal Series No. Terminal Order No. Reel Form only 1 Wire Size AWG Insulation Diameter IPC/WHMA-A620 Terminal 505431 505431-1000 26-30 NA 1 Customer to cut off terminal from reel 0.10mm maximum Cut-off Tab. To achieve optimum IPC-A620 insulation crimps, use this insulation OD range. Overall insulation OD specification for terminal. Strip Length DEFINITION OF TERMS BELL MOUTH STRIP LENGTH BRUSH SEAM BEND UP TWISTING ROLLING CUT-OFF TAB CONDUCTOR CRIMP HEIGHT WIRE INSULATION CRIMP BEND DOWN Doc No ATS-20021803HM Release Date 01-27-17 UNCONTROLLED COPY Page 1 of 6 Hand Crimp Tool for 1.25mm Pitch Wire-to-Board Crimp Terminals CRIMP SPECIFICATION After crimping, the crimp profiles should measure the following. Terminal Series No. Bell mouth Conductor Brush

PDF Datasheet Preview

Hand Crimp Tool for 1.25mm Pitch Wire-to-Board Crimp Terminals

Modular Crimp Head Order No. 2002180370

Application Tooling Specification Sheet

TYPE 4A

Hand Crimp Tool Order No. 2002180300

A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles with simple contact positioning Easy handling due to outstanding force ratio Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter Order No. Can also be used in the Battery Powered Tool Order No.63816-0200 110 V or 63816-0250 220 V ,
accompanied by Battery Powered Crimp Adapter Order No.

SCOPE

Products 1.25mm Pitch Wire-to-Board Crimp Terminal, 26-30 AWG, UL1061 wire.

Terminal Series No.

Terminal Order No. Reel Form only 1

Wire Size AWG

Insulation Diameter

IPC/WHMA-A620 Terminal
505431
505431-1000 26-30 NA
1 Customer to cut off terminal from reel 0.10mm maximum Cut-off Tab.
To achieve optimum IPC-A620 insulation crimps, use this insulation OD range.
Overall insulation OD specification for terminal.

Strip Length

DEFINITION OF TERMS

BELL MOUTH

STRIP LENGTH BRUSH

SEAM

BEND UP TWISTING

ROLLING

CUT-OFF TAB

CONDUCTOR CRIMP HEIGHT

WIRE

INSULATION CRIMP

BEND DOWN

Doc No ATS-20021803HM Release Date 01-27-17

UNCONTROLLED COPY

Page 1 of 6

Hand Crimp Tool for 1.25mm Pitch Wire-to-Board Crimp Terminals

CRIMP SPECIFICATION

After crimping, the crimp profiles should measure the following.

Terminal Series No.

Bell mouth

Conductor Brush

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 2002180300 Datasheet file may be downloaded here without warranties.

Datasheet ID: 2002180300 649641