638616070

638616070 Datasheet

FineAdjust Applicator Specification Sheet Part No. 63861-6000

Part	Datasheet
638616070	638616070 (pdf)

PDF Datasheet Preview
Fine Adjust Applicator for 2.50mm Pitch SPOX Male Crimp Terminal FineAdjust Applicator Specification Sheet Part No. 63861-6000 Quick punch removal with the push of a button for fast and easy tooling change Applicator designed to industry standard mounting and shut height 135.80mm Quick set-up time plus the crimp height, track and feed adjustments can be set without removing the applicator from the press Fine adjustment allows users to achieve target with little effort by adjusting in increments of 0.15mm for conductor crimp height and .063mm for insulation height Independent adjustment rings allow users to quickly adjust the conductor or insulation crimp height without affecting each other Directly adapts to most automatic wire processing machines SCOPE Products 2.50mm Pitch SPOX Male Crimp Terminal, 22 - 24 AWG. Terminal Series No. 5263 45627 Terminal Order No. 08-70-1039 08-70-1045 08-70-1047 08-70-1048 45627-0001 45627-0002 39-00-0042 39-00-0151 98-00-0242 45627-1001 45627-1002 Wire Size AWG 22 - 28 22 - 24 Insulation Diameter Strip Length DEFINITION OF TERMS BRUSH BELL MOUTH CONDUCTOR CRIMP INSULATION CRIMP SEAM BEND UP ROLLING STRIP LENGTH CUT-OFF TAB TWISTING BEND DOWN CRIMP HEIGHT The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope. Doc No ATS-638616000 Release Date 06-15-00 UNCONTROLLED COPY Page 1 of 5 Fine Adjust Applicator for 2.50mm Pitch SPOX Male Crimp Terminal CRIMP SPECIFICATION Terminal Series No. 5263 45627 Bell mouth Cut-off Tab Maximum Conductor Brush Terminal Series No. 5263 45627 Bend up Bend down Degree

PDF Datasheet Preview

Fine Adjust Applicator for 2.50mm Pitch SPOX Male Crimp Terminal

FineAdjust Applicator Specification Sheet Part No. 63861-6000

Quick punch removal with the push of a button for fast and easy tooling change Applicator designed to industry standard mounting and shut height 135.80mm Quick set-up time plus the crimp height, track and feed adjustments can be set without removing the applicator from the press Fine adjustment allows users to achieve target with little effort by adjusting in increments of 0.15mm for conductor crimp height and .063mm for insulation height Independent adjustment rings allow users to quickly adjust the conductor or insulation crimp height without affecting each other Directly adapts to most automatic wire processing machines

SCOPE

Products 2.50mm Pitch SPOX Male Crimp Terminal, 22 - 24 AWG.

Terminal Series No. 5263 45627

Terminal Order No.
08-70-1039 08-70-1045 08-70-1047 08-70-1048 45627-0001 45627-0002
39-00-0042 39-00-0151 98-00-0242
45627-1001 45627-1002

Wire Size AWG 22 - 28
22 - 24

Insulation Diameter

Strip Length

DEFINITION OF TERMS

BRUSH

BELL MOUTH

CONDUCTOR CRIMP

INSULATION CRIMP

SEAM

BEND UP

ROLLING

STRIP LENGTH

CUT-OFF TAB

TWISTING BEND DOWN

CRIMP HEIGHT

The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.

Doc No ATS-638616000 Release Date 06-15-00

UNCONTROLLED COPY

Page 1 of 5

Fine Adjust Applicator for 2.50mm Pitch SPOX Male Crimp Terminal

CRIMP SPECIFICATION

Terminal Series No.
5263 45627

Bell mouth

Cut-off Tab Maximum

Conductor Brush

Terminal Series No.
5263 45627

Bend up Bend down

Degree

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 638616070 Datasheet file may be downloaded here without warranties.

Datasheet ID: 638616070 649591