808-0068
808-0068 Datasheet
| Part | Datasheet |
|---|---|
808-0068 |
808-0068 (pdf) |
| PDF Datasheet Preview |
|---|
| GS2101M Evaluation Board Quick Start Guide Supports GS2101M Module This Quick Start Guide will walk you through the easy steps to setup and run the GS2101M EVB Board for Serial to WiFi and/or IP to WiFi APP. 1 Build the Package 1 Step Open the SDK Builder secure/login If you do not have a login, sign up and register for a Portal account at: 2 Step Select Build Type, Module, Firmware Version, Build Output and Application to build as shown in the below snap- shot. Click the Build button to generate the binaries. The build configuration will be submitted and a confirmation email will be sent notifying that the package is complete and ready to download the zip file containing the firmware and binaries used to program the board. The following figures shows the SDK Builder screen for building Serial to WiFi or IP to WiFi custom binaries. GS2101M_QSG_EVB_001267, Version1.1 You will need the following items • Quick Start Guide this document • GS2100M Evaluation Board • Serial Cable USB to Mini-USB Copyright 2016 GainSpan Corporation. All rights reserved. Important Newer version of the firmware maybe available on the GainSpan Portal. Login to the GainSpan Portal and check the latest version available for your board on the SDK Builder. If the SDK Builder has a newer version, follow the steps in the SDK Builder User Guide to build the latest binary and update your evaluation board using the gs2k_module_programming utility. 2 Program the GS Module 1 Step Plug the mini-USB cable, one end of the USB port to GS2101M board USB0 and the other end of the USB port to the computer or laptop. GS2101M_QSG_EVB_001267, Version1.1 2 Step Turn the PROGRAM/RUN switch to PROGRAM mode on the EVB and perform a power cycle. 3 Step Open the GainSpan Serial Flash Programmer GUI appli- cation and select Serial-to-WiFi firmware using the UART interface from location <EVK Program the EVB. 4 Step Put the PROGRAM/RUN switch to RUN mode and perform a power cycle. 4 Configure the Serial Port Note To verify you have the correct Serial COM port, open the Windows Control Panel and select Device Manager. Open a Serial Terminal Emulation Software of your choice. Select the serial COM port associated with the board. In this example we are using Tera Term VT. You can download a copy of Tera Term VT at: 5 Run the GS Module 1 Step Ensure that the RUN/PROGRAM switch is in RUN mode. Turn the ON/OFF switch to the ON position. The Serial to WiFi or IP to WiFi APP will display in the Tera Term VT window. Setup the Serial port: • Port COMx x is the number of the COM port • Baud Rate 9600 • Data 8 bit • Parity none • Stop 1 bit • Flow Control none Copyright 2016 GainSpan Corporation. All rights reserved. 2 Step Enter AT comand, at+ver=??, to verify that the board is communicating and the firmware version on the board is displayed. The Tera Term VT logs of the command for Serial to WiFi and IP to WiFi is as shown below: Note The Evaluation Package includes documentation, EVB schematics, EVB firmware, software utilities such as Tera Term, and gs2k_flashprogram utility. Use the gs2k_flashprogram utility provided with the EVB package to re-flash the EVB if needed. Copyright 2016 GainSpan Corporation. All rights reserved. GS2101M_QSG_EVB_001267, Version1.1 Information For general questions, visit: For sales, visit: For technical and product support, visit: |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 808-0068 Datasheet file may be downloaded here without warranties.