MIKROE-2043

MIKROE-2043 Datasheet

WiFi 6 click - MikroElektonika Documentation

Part	Datasheet
MIKROE-2043	MIKROE-2043 (pdf)

PDF Datasheet Preview
WiFi 6 click - MikroElektonika Documentation WiFi 6 click From MikroElektonika Documentation WiFi 6 click is a mikroBUS add-on board with Bluegiga's WF121-A self-contained Wi-Fi module. With a fully integrated radio and 32-bit microcontroller, this module is ideal for embedded applications. The module's 2.4GHz band radio is fully compliant with IEEE 802.11b/g/n and offers excellent radio performance. Allows end user applications to be embedded onto the integrated PIC32MX695H, a 32-bit 80MHz microcontroller with 128KB RAM and 512KB Flash memory, for development of lower-cost and smaller sized products. Also integrated on-board is a single power supply. WiFi 6 click communicates with the target MCU through the mikroBUS UART TX, RX , SPI, or IC2, with additional functionality provided by CTS pin in place of default mikroBUS INT pin a mikroProg connector allows to update the firmware of the internal PIC32. SPI interface can be accessed by jumpers on the click board. The board is designed to use a power supply only. WiFi 6 click Features and usage notes The integrated firmware provides Wi-Fi and networking stack services TCP/IP, UDP, DHCP, DNS . BGAPI host protocol for modem like usage. BGScript scripting language or native C-development for self-contained applications. On-board 32-bit embedded PIC32MX695H 80MHz, 128kB RAM and 512kB Flash memory MCU. TX Power +17dBm RX Sensitivity -97 dBm Automatically powers on RF circuitry only when also available in PDF needed for power saving functionality. PIC32-series 32-bit MCU on module can reach a performance of 125 DMIPS while keeping low power consumption. Bluetooth coexistence system allows co-located WiFi and Bluetooth devices to be aware of each other, WF121-A supports sharing the integrated antenna or antenna connector with a Bluetooth device through the BT_RF pad. I2C, SPI and UART interfaces. mikroProg connections for updating firmware for the on-board PIC32. WiFi 6 click IC/Module WF121-A Interface UART TX, RX , I2C SCK, SDA , SPI SCK,CS,MISO,MOSI , CTS Power supply 3.3V Website Programming This snippet shows how easy it is to connect to the WiFi 6 click and begin communication. 1 void main //TFT display output initialization. init_TFT ; //USB UART initialization. UART1_Init 115200 ; show_status "UART1 initialized",1 ; //WF121 UART initialization. init_WF121_UART ;

PDF Datasheet Preview

WiFi 6 click - MikroElektonika Documentation

WiFi 6 click

From MikroElektonika Documentation

WiFi 6 click is a mikroBUS add-on board with Bluegiga's WF121-A self-contained Wi-Fi module. With a fully integrated radio and 32-bit microcontroller, this module is ideal for embedded applications.

The module's 2.4GHz band radio is fully compliant with IEEE 802.11b/g/n and offers excellent radio performance. Allows end user applications to be embedded onto the integrated PIC32MX695H, a 32-bit 80MHz microcontroller with 128KB RAM and 512KB Flash memory, for development of lower-cost and smaller sized products. Also integrated on-board is a single power supply.

WiFi 6 click communicates with the target MCU through the mikroBUS UART TX, RX , SPI, or IC2, with additional functionality provided by CTS pin in place of default mikroBUS INT pin a mikroProg connector allows to update the firmware of the internal PIC32. SPI interface can be accessed by jumpers on the click board. The board is designed to use a power supply only.

WiFi 6 click

Features and usage notes

The integrated firmware provides Wi-Fi and
networking stack services TCP/IP, UDP, DHCP,

DNS .

BGAPI host protocol for modem like usage.

BGScript scripting language or native

C-development for self-contained applications.

On-board 32-bit embedded PIC32MX695H 80MHz,
128kB RAM and 512kB Flash memory MCU.

TX Power +17dBm

RX Sensitivity -97 dBm

Automatically powers on RF circuitry only when
also available in PDF
needed for power saving functionality. PIC32-series 32-bit MCU on module can reach a
performance of 125 DMIPS while keeping low
power consumption. Bluetooth coexistence system allows co-located WiFi and Bluetooth devices to be aware of each
other, WF121-A supports sharing the integrated antenna or antenna connector with a Bluetooth
device through the BT_RF pad. I2C, SPI and UART interfaces. mikroProg connections for updating firmware for the on-board PIC32.

WiFi 6 click

IC/Module WF121-A

Interface UART TX, RX , I2C SCK, SDA , SPI SCK,CS,MISO,MOSI , CTS

Power supply
3.3V

Website

Programming

This snippet shows how easy it is to connect to the WiFi 6 click and begin communication.
1 void main
//TFT display output initialization.
init_TFT ;
//USB UART initialization.

UART1_Init 115200 ;
show_status "UART1 initialized",1 ;
//WF121 UART initialization.
init_WF121_UART ;

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2043 Datasheet file may be downloaded here without warranties.

Datasheet ID: MIKROE-2043 649501