IRMDKG6-300W

IRMDKG6-300W Datasheet

IRMDKG6-300W

Part	Datasheet
IRMDKG6-300W	IRMDKG6-300W (pdf)

PDF Datasheet Preview
IRMDKG6-300W DPAK IGBT Motor Drive Reference Design Kit The reference design power board is designed to showcase IR DPAK IRGR4610DPBF IGBT in a motor drive application. Product Summary • IGBT inverter power stage for 3 phase motors • FR4 based 1oz copper two-layer PCB • 100-240V AC input range • 300W motor power range with heatsink • Single shunt configuration The 76 x 83mm board has two layers with 1oz ~35µm copper each. IRGR4610DPBF Features Low VCE ON and switching losses High efficiency in a wide range of applications and switching frequencies Square RBSOA and maximum junction temperature of Improved reliability due to rugged hard switching 175°C performance and high power capability Positive VCE ON temperature coefficient and tight distribution of parameters Excellent current sharing in parallel operation 5µs short circuit SOA Enables short circuit protection scheme Lead-free, RoHS compliant Environmentally friendly 2014 International Rectifier September 25, 2014 IRMDKG6-300W Safety Precautions In addition to the precautions listed throughout this manual, please read and understand the following statements regarding hazards associated with development system. ATTENTION The ground potential of the IRMDKG6-300W system is biased to a negative DC bus voltage potential. When measuring voltage waveform by oscilloscope, the scope ground needs to be isolated. Failure to do so may result in personal injury or death. Darkened display LEDs is not an indication that capacitors have discharged to safe voltage levels. ATTENTION IRMDKG6-300W system contains dc bus capacitors which take time to discharge after removal of the main supply. Before working on the drive system, wait at least three minutes and until the capacitors have discharged to safe voltage levels. Failure to do so may result in personal injury or death. Darkened display LEDs is not an indication that capacitors have discharged to safe voltage levels. ATTENTION Only personnel familiar with the drive and associated machinery should plan or implement the installation, start-up, and subsequent maintenance of the system. Failure to comply may result in personal injury and/or equipment damage. ATTENTION The surface temperatures of the drive may become hot, which may cause injury. ATTENTION IRMDKG6-300W system contains ESD Electrostatic Discharge sensitive parts and assemblies. Static control precautions are required when installing, testing, servicing or repairing this assembly. Component damage may result if ESD control procedures are not followed. If you are not familiar with static control procedures, reference applicable ESD protection handbook and guideline. 2014 International Rectifier September 25, 2014 IRMDKG6-300W ATTENTION An incorrectly applied or installed drive can result in component damage or reduction in product life. Wiring or application errors such as undersizing the motor, supplying an incorrect or inadequate AC supply, or excessive ambient temperatures may result in system malfunction. ATTENTION Remove and lock out power from the drive before you disconnect or reconnect wires or perform service. Wait three minutes after removing power to discharge the bus voltage. Do not attempt to service the drive until bus voltage has discharged to zero. Failure to do so may result in bodily injury or death. ATTENTION Do not connect power factor correction capacitors to output terminals U, V, and W. Doing so may result in equipment damage or bodily injury. ATTENTION Debris When Unpacking IRMDKG6-300W system is shipped with packing materials that need to be removed prior to installation. Failure to remove all debris and packing materials which are unnecessary for system installation may result in overheating or abnormal operating condition. 2014 International Rectifier September 25, 2014 Hardware Description Inverter power stage J8 Motor connector IRMDKG6-300W

PDF Datasheet Preview

IRMDKG6-300W

DPAK IGBT Motor Drive Reference Design Kit

The reference design power board is designed to showcase IR DPAK IRGR4610DPBF IGBT in a motor drive application.

Product Summary
• IGBT inverter power stage for 3 phase motors
• FR4 based 1oz copper two-layer PCB
• 100-240V AC input range
• 300W motor power range with heatsink
• Single shunt configuration

The 76 x 83mm board has two layers with 1oz ~35µm copper each.

IRGR4610DPBF Features

Low VCE ON and switching losses

High efficiency in a wide range of applications and switching frequencies

Square RBSOA and maximum junction temperature of Improved reliability due to rugged hard switching
175°C
performance and high power capability

Positive VCE ON temperature coefficient and tight distribution of parameters

Excellent current sharing in parallel operation
5µs short circuit SOA

Enables short circuit protection scheme

Lead-free, RoHS compliant

Environmentally friendly
2014 International Rectifier

September 25, 2014

IRMDKG6-300W

Safety Precautions

In addition to the precautions listed throughout this manual, please read and understand the following statements regarding hazards associated with development system.

ATTENTION The ground potential of the IRMDKG6-300W system is biased to a negative DC bus voltage potential. When measuring voltage waveform by oscilloscope, the scope ground needs to be isolated. Failure to do so may result in personal injury or death. Darkened display LEDs is not an indication that capacitors have discharged to safe voltage levels.

ATTENTION IRMDKG6-300W system contains dc bus capacitors which take time to discharge after removal of the main supply. Before working on the drive system, wait at least three minutes and until the capacitors have discharged to safe voltage levels. Failure to do so may result in personal injury or death. Darkened display LEDs is not an indication that capacitors have discharged to safe voltage levels.

ATTENTION Only personnel familiar with the drive and associated machinery should plan or implement the installation, start-up, and subsequent maintenance of the system. Failure to comply may result in personal injury and/or equipment damage.

ATTENTION The surface temperatures of the drive may become hot, which may cause injury.

ATTENTION IRMDKG6-300W system contains ESD Electrostatic Discharge sensitive parts and assemblies. Static control precautions are required when installing, testing, servicing or repairing this assembly. Component damage may result if ESD control procedures are not followed. If you are not familiar with static control procedures, reference applicable ESD protection handbook and guideline.
2014 International Rectifier

September 25, 2014

IRMDKG6-300W

ATTENTION An incorrectly applied or installed drive can result in component damage or reduction in product life. Wiring or application errors such as undersizing the motor, supplying an incorrect or inadequate AC supply, or excessive ambient temperatures may result in system malfunction.

ATTENTION Remove and lock out power from the drive before you disconnect or reconnect wires or perform service. Wait three minutes after removing power to discharge the bus voltage. Do not attempt to service the drive until bus voltage has discharged to zero. Failure to do so may result in bodily injury or death.

ATTENTION Do not connect power factor correction capacitors to output terminals U, V, and W. Doing so may result in equipment damage or bodily injury.

ATTENTION Debris When Unpacking IRMDKG6-300W system is shipped with packing materials that need to be removed prior to installation. Failure to remove all debris and packing materials which are unnecessary for system installation may result in overheating or abnormal operating condition.
2014 International Rectifier

September 25, 2014

Hardware Description

Inverter power stage

J8 Motor connector

IRMDKG6-300W

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IRMDKG6-300W Datasheet file may be downloaded here without warranties.

Datasheet ID: IRMDKG6-300W 639102