MIKROE-2554

MIKROE-2554 Datasheet

PID MIKROE-2554 Weight 22 g

Part	Datasheet
MIKROE-2554	MIKROE-2554 (pdf)

PDF Datasheet Preview
Fever click PID MIKROE-2554 Weight 22 g Fever click measures your body temperature with the accuracy of 0.1°C 37°C to 39°C . The click carries MAX30205 human body temperature sensor. Fever click is designed to work on a 3.3V power supply. It communicates with the target MCU over I2C interface. MAX30205 sensor features The MAX30205 temperature sensor accurately measures temperature and provide an overtemperature alarm/interrupt/shutdown output. This device converts the temperature measurements to digital form using a high resolution, sigma-delta, analog-to-digital converter ADC . An I2C-compatible two-wire serial interface allows access to conversion results. The MAX30205 has 0.1°C accuracy 37°C to 39°C , and 16-Bit 0.00390625°C temperature resolution. Normal body temperature The normal body temperature, of a healthy person, is 37°C. But this depends on various factors, like the age and sex of the person, the temperature of the room the person is in, the time of the day, etc. A body temperature above 37.5°C up to 40°C is considered a fever. Key features • MAX20305 sensor o 0.1°C Accuracy 37°C to 39°C o 0.00390625°C Temperature Resolution o 600uA typ Operating Supply Current • I2C interface • 3.3V power supply Specification Product Type Temperature / Humidity Applications Fitness and medical applications MAX30205 human body temperature sensor Key Features 0.1°C Accuracy 37°C to 39°C , 16-Bit 0.00390625°C temperature resolution Interface Power Supply 3.3V Compatibility mikroBUS Click board size M x mm Pinout diagram This table shows how the pinout on Fever click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns . Notes mikroBUStm Notes Not connected NC 1 AN PWM 16 NC Not connected Not connected NC 2 RST INT 15 OS Overtemperature Shutdown Output. Not connected NC 3 CS TX 14 NC Not connected Not connected NC 4 SCK RX 13 NC Not connected Not connected NC 5 MISO SCL 12 SCL Clock Input. Not connected NC 6 MOSI SDA 11 SDA Input/Output Line. Power supply +3.3V 7 3.3V 5V 10 NC Not connected Ground GND 8 GND 9 GND Ground Maximum ratings Min Typ Max Unit Supply Voltage Input Current at Any Pin Continuous Power Dissipation Operating Temperature Range 0 50 °C Programming Code examples for Fever click, written for MikroElektronika hardware and compilers are available on Libstock. Fever click library communicates with the sensor, and converts the measured data into useful format. It also contains functions for the configuration of the click.

PDF Datasheet Preview

Fever click

PID MIKROE-2554 Weight 22 g

Fever click measures your body temperature with the accuracy of 0.1°C 37°C to 39°C . The click carries MAX30205 human body temperature sensor. Fever click is designed to work on a 3.3V power supply. It communicates with the target MCU over I2C interface. MAX30205 sensor features The MAX30205 temperature sensor accurately measures temperature and provide an overtemperature alarm/interrupt/shutdown output. This device converts the temperature measurements to digital form using a high resolution, sigma-delta, analog-to-digital converter ADC . An I2C-compatible two-wire serial interface allows access to conversion results. The MAX30205 has 0.1°C accuracy 37°C to 39°C , and 16-Bit 0.00390625°C temperature resolution.

Normal body temperature

The normal body temperature, of a healthy person, is 37°C. But this depends on various factors, like the age and sex of the person, the temperature of the room the person is in, the time of the day, etc.

A body temperature above 37.5°C up to 40°C is considered a fever.

Key features
• MAX20305 sensor o 0.1°C Accuracy 37°C to 39°C o 0.00390625°C Temperature Resolution o 600uA typ Operating Supply Current
• I2C interface
• 3.3V power supply

Specification

Product Type Temperature / Humidity

Applications Fitness and medical applications

MAX30205 human body temperature sensor

Key Features 0.1°C Accuracy 37°C to 39°C , 16-Bit 0.00390625°C temperature resolution

Interface

Power Supply 3.3V

Compatibility mikroBUS

Click board size M x mm

Pinout diagram

This table shows how the pinout on Fever click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns .

Notes
mikroBUStm

Notes

Not connected NC 1 AN PWM 16 NC Not connected

Not connected NC 2 RST INT 15 OS Overtemperature Shutdown Output.

Not connected NC 3 CS TX 14 NC Not connected

Not connected NC 4 SCK RX 13 NC Not connected

Not connected NC 5 MISO SCL 12 SCL Clock Input.

Not connected NC 6 MOSI SDA 11 SDA Input/Output Line.

Power supply +3.3V 7 3.3V 5V 10 NC Not connected

Ground GND 8 GND 9 GND Ground

Maximum ratings

Min Typ Max Unit

Supply Voltage

Input Current at Any Pin

Continuous Power Dissipation

Operating Temperature Range 0
50 °C

Programming

Code examples for Fever click, written for MikroElektronika hardware and compilers are available on Libstock.

Fever click library communicates with the sensor, and converts the measured data into useful format. It also contains functions for the configuration of the click.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2554 Datasheet file may be downloaded here without warranties.

Datasheet ID: MIKROE-2554 649372