MIKROE-2405
MIKROE-2405 Datasheet
PID MIKROE-2405 Weight 30 g Condition New product Skywire click is an adapter click, which hosts NimbeLink/Skywire cellular modems using stacking headers to MikroElektronika development boards. It carries the MCP1826 low dropout regulator from Microchip. NOTE the Skywire modem and the Thermo 3 click are not included in this offer.
| Part | Datasheet |
|---|---|
MIKROE-2405 |
MIKROE-2405 (pdf) |
| PDF Datasheet Preview |
|---|
| Skywire click PID MIKROE-2405 Weight 30 g Condition New product Skywire click is an adapter click, which hosts NimbeLink/Skywire cellular modems using stacking headers to MikroElektronika development boards. It carries the MCP1826 low dropout regulator from Microchip. NOTE the Skywire modem and the Thermo 3 click are not included in this offer. Table of contents Additional mikroBUS socket Skywire cellular modems Key features Skywire click is an adapter click, which hosts NimbeLink/Skywire cellular modems using stacking headers to MikroElektronika development boards. It carries the MCP1826 low dropout regulator from Microchip. Skywire click is designed to run either on 3.3V or 5V power supply. The click communicates with the target MCU over UART interface, and the following mikroBUS pins PWM, AN, INT, RST, CS. NOTE the Skywire modem and the Thermo 3 click are not included in this offer. Additional mikroBUS socket Skywire click has the capability to host an additional mini sized click board . It also has its own power supply to make the needed voltage for the modules. Skywire cellular modems Skywire cellular modems are the smallest on the market today. This product family from NimbeLink covers everything from 2G and 3G to LTE. They all share the same footprint and pinout, and are flexible for implementation. Key features • MCP1826 LDO regulator o 1000 mA Output Current Capability o Output voltage range of 0.8V to 5.0V • Additional socket for a mini sized click board • Interface UART • 3.3V or 5V power supply SPECIFICATION Product Type Adapter On-board modules MCP1826 LDO regulator Key Features Additional socket for mini sized click board , MCP1826 LDO regulator, 3.3V or 5V power supply Key Benefits Adapts Nimbelink/Skywire modules with MikroElektronika development systems Interface UART Power Supply 3.3V or 5V Compatibility mikroBUS Click board size L x mm Pinout diagram This table shows how the pinout on Skywire click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns . Notes mikroBUStm Notes Enable EN 1 AN PWM 16 CTS Clear To Send RESET RST 2 RST INT 15 AD1_J ADC IN Request To Send RTS 3 CS TX 14 TX UART transmit Not connected NC 4 SCK RX 13 RX UART receive Not connected NC 5 MISO SCL 12 NC Not connected Not connected NC 6 MOSI SDA 11 NC Not connected Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND 9 GND Ground Programming The following code snippet starts the main function in the Skywire application. This is a simple main function, which excepts a call and replies with an SMS to caller. The content of the SMS is the current temperature measurement in degrees Celsius. |
| More datasheets: ICS650R-07T | ICS650R-07 | ICS650R-07I | ICS650R-07IT | 59166-1-S-00-A | M45PE40-VMP6G | M45PE40-VMP6TG TR | M45PE40-VMW6TG TR | DEME9PEK87 | DCM37PENMBK52 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2405 Datasheet file may be downloaded here without warranties.