UPTB5/TR13

UPTB5/TR13 Datasheet

UPT5-UPT48 UPTB5-UPTB48

Part	Datasheet
UPTB5/TR13	UPTB5/TR13 (pdf)

PDF Datasheet Preview
580 Pleasant St. Watertown, MA 02472 PH 617 926-0404 FAX 617 924-1235 UPT5-UPT48 UPTB5-UPTB48 • Powermite Package, 5 to 48 V • Peak Pulse Power 1000 W for 8x20 Micro-second Pulse • Clamping Time in Pico-seconds • Integral Heat Sink / Locking Tabs • Full Metallic Bottom Eliminates Flux Entrapment • Bi-directional Version Available SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS Microsemi’s new Powermite UPT series transient voltage suppressors feature oxide passivated zener type chips, with high-temperature solder bonds to achieve high surge capability, and negligible electrical degradation under repeated surge conditions. In addition to its size advantages, Powermite package includes a full metallic bottom which eliminates the possibility of solder flux entrapment at assembly, and a unique locking tab that acts as an integral heatsink. Innovative design makes this device fully compatible for use with automatic insertion equipment. Absolute Maximum Ratings at 25°C Stand-Off Voltage 5 to 48 VOLTS See Characteristics Table Peak Pulse Power 8 x 20 micro-second pulse 1000 WATTS See Figure 1 Peak Pulse Power 1 milli-second pulse 150 WATTS See Figure 2 Peak Pulse Current See Characteristics Table Breakdown Voltage See Characteristics Table Power Continuous WATTS Electrical Characteristics at 25°C DEVICE TYPE Stand-Off Voltage VR Minimum Breakdown Voltage BV min 1 mA Maximum Leakage Current IR VR Maximum Peak Current* IP Unidirectional Bi-directional UPT 5 UPTB 5 UPT 8 UPTB 8 UPT10 UPTB10 UPT12 UPTB12 UPT15 UPTB15 UPT17 UPTB17 UPT24 UPTB24 UPT28 UPTB28 UPT33 UPTB33 UPT48 UPTB48 * See Figure 1 µA 50 2 1 Maximum Clamping Voltage VR 10 A

PDF Datasheet Preview

580 Pleasant St. Watertown, MA 02472 PH 617 926-0404 FAX 617 924-1235

UPT5-UPT48 UPTB5-UPTB48
• Powermite Package, 5 to 48 V
• Peak Pulse Power 1000 W for 8x20 Micro-second Pulse
• Clamping Time in Pico-seconds
• Integral Heat Sink / Locking Tabs
• Full Metallic Bottom Eliminates Flux Entrapment
• Bi-directional Version Available

SURFACE MOUNT TRANSIENT VOLTAGE

SUPPRESSORS

Microsemi’s new Powermite UPT series transient voltage suppressors feature oxide passivated zener type chips, with high-temperature solder bonds to achieve high surge capability, and negligible electrical degradation under repeated surge conditions.

In addition to its size advantages, Powermite package includes a full metallic bottom which eliminates the possibility of solder flux entrapment at assembly, and a unique locking tab that acts as an integral heatsink. Innovative design makes this device fully compatible for use with automatic insertion equipment.

Absolute Maximum Ratings at 25°C

Stand-Off Voltage 5 to 48 VOLTS See Characteristics Table Peak Pulse Power 8 x 20 micro-second pulse 1000 WATTS See Figure 1 Peak Pulse Power 1 milli-second pulse 150 WATTS See Figure 2 Peak Pulse Current See Characteristics Table Breakdown Voltage See Characteristics Table Power Continuous WATTS

Electrical Characteristics at 25°C

DEVICE TYPE

Stand-Off Voltage VR

Minimum Breakdown

Voltage BV min 1 mA

Maximum Leakage Current IR VR

Maximum Peak

Current* IP

Unidirectional Bi-directional

UPT 5

UPTB 5

UPT 8

UPTB 8

UPT10

UPTB10

UPT12

UPTB12

UPT15

UPTB15

UPT17

UPTB17

UPT24

UPTB24

UPT28

UPTB28

UPT33

UPTB33

UPT48

UPTB48
* See Figure 1
µA 50 2 1

Maximum Clamping Voltage VR 10 A

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived UPTB5/TR13 Datasheet file may be downloaded here without warranties.

Datasheet ID: UPTB5/TR13 649187