UPS1040CTE3

UPS1040CTE3 Datasheet

UPS1040CTe3

Part	Datasheet
UPS1040CTE3	UPS1040CTE3 (pdf)

PDF Datasheet Preview
.COM UPS1040CTe3 10 A Dual Schottky Barrier Rectifiers This UPS1040CTe3 in the package is a high efficiency centertap dual Schottky rectifier that is also RoHS compliant offering high current/power capabilities previously found only in much larger packages. They are ideal for SMD applications that operate at high frequencies. In addition to its size advantages, the package includes a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly and a unique locking tab act as an efficient heat path to the heat-sink mounting. Its innovative design makes this device ideal for use with automatic insertion equipment. IMPORTANT website: ABSOLUTE MAXIMUM RATINGS AT 25º C UNLESS OTHERWISE SPECIFIED Rating Value Unit DC Blocking Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on Rated Tc =90 ºC Storage Temperature VRRM VRWM VR V R RMS IFSM TSTG 28 10 150 -55 to +150 Junction Temperature -55 to +125 THERMAL CHARACTERISTICS UNLESS OTHERWISE SPECIFIED Thermal Resistance dual device Junctions-to Bottom Case V A ºC ºC ºC/Watt KEY FEATURES Very low thermal resistance package Dual center-tap Schottky configuration with common cathode RoHS Compliant with e3 suffix part number Guard-ring-die construction for transient protection Efficient heat path with Integral locking bottom metal tab Low forward voltage Full metallic bottom eliminates flux entrapment Compatible with automatic insertion Low profile-maximum height of 1mm APPLICATIONS/BENEFITS Switching and Regulating Power supplies. Silicon Schottky hot carrier rectifier for Small foot print 190 X 260 mils 1:1 Actual size See mounting pad details on pg 5 MECHANICAL & PACKAGING • CASE Void-free transfer molded thermosetting epoxy compound meeting UL94V-0 • FINISH Annealed matte-Tin plating over copper and readily solderable per MIL-STD750 method 2026 consult factory for Tin-Lead plating • POLARITY See figure left • MARKING S1040CT• • WEIGHT gram approx. • Package dimension on last page • Tape & Reel option 16 mm tape per Standard EIA-481-B, 5000 on 13” reel UPS1040CTe3

PDF Datasheet Preview

.COM

UPS1040CTe3
10 A Dual Schottky Barrier Rectifiers

This UPS1040CTe3 in the package is a high efficiency centertap dual Schottky rectifier that is also RoHS compliant offering high current/power capabilities previously found only in much larger packages. They are ideal for SMD applications that operate at high frequencies. In addition to its size advantages, the package includes a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly and a unique locking tab act as an efficient heat path to the heat-sink mounting. Its innovative design makes this device ideal for use with automatic insertion equipment.

IMPORTANT website:

ABSOLUTE MAXIMUM RATINGS AT 25º C UNLESS OTHERWISE SPECIFIED

Rating

Value

Unit

DC Blocking Voltage

Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine wave Superimposed
on Rated Tc =90 ºC

Storage Temperature

VRRM VRWM

VR V R RMS

IFSM

TSTG
28 10 150 -55 to +150

Junction Temperature
-55 to +125

THERMAL CHARACTERISTICS

UNLESS OTHERWISE SPECIFIED

Thermal Resistance dual device

Junctions-to Bottom Case

V A ºC ºC
ºC/Watt

KEY FEATURES

Very low thermal resistance package Dual center-tap Schottky configuration with
common cathode RoHS Compliant with e3 suffix part number Guard-ring-die construction for transient
protection Efficient heat path with Integral locking bottom
metal tab Low forward voltage Full metallic bottom eliminates flux entrapment Compatible with automatic insertion Low profile-maximum height of 1mm

APPLICATIONS/BENEFITS

Switching and Regulating Power supplies. Silicon Schottky hot carrier rectifier for

Small foot print 190 X 260 mils 1:1 Actual size

See mounting pad details on pg 5

MECHANICAL & PACKAGING
• CASE Void-free transfer molded thermosetting epoxy compound meeting UL94V-0
• FINISH Annealed matte-Tin plating over copper and readily solderable per MIL-STD750 method 2026 consult factory for Tin-Lead plating
• POLARITY See figure left
• MARKING S1040CT•
• WEIGHT gram approx.
• Package dimension on last page
• Tape & Reel option 16 mm tape per Standard

EIA-481-B, 5000 on 13” reel

UPS1040CTe3

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived UPS1040CTE3 Datasheet file may be downloaded here without warranties.

Datasheet ID: UPS1040CTE3 649176