JAN2N2324
JAN2N2324 Datasheet
JAN JANTX JANTXV
| Part | Datasheet |
|---|---|
JAN2N2324 |
JAN2N2324 (pdf) |
| Related Parts | Information |
|---|---|
JANTX2N2323A |
JANTX2N2323A |
JAN2N2324S |
JAN2N2324S |
JAN2N2329AS |
JAN2N2329AS |
JANTX2N2323AS |
JANTX2N2323AS |
JAN2N2326 |
JAN2N2326 |
JAN2N2329 |
JAN2N2329 |
| PDF Datasheet Preview |
|---|
| TECHNICAL DATA SILICON CONTROLLED RECTIFIER Qualified per MIL-PRF-19500/276 Devices 2N2323 2N2323S 2N2323A 2N2323AS 2N2324 2N2324S 2N2324A 2N2324AS 2N2326 2N2326S 2N2326A 2N2326AS 2N2328 2N2328S 2N2328A 2N2328AS 2N2329 2N2329S Qualified Level JAN JANTX JANTXV MAXIMUM RATINGS Ratings 2N2323,S/ 2N2324,S/ 2N2326,S/ 2N2328,S/ 2N2323A,S 2N2324A,S 2N2326A,S 2N2328A,S 2N2329,S Unit 400 Vdc Forward Blocking Voltage VFBXM Average Forward Current 1 Forward Current Surge Peak 2 IFSM 75 50 3/4 150 100 3/4 300 200 3/4 400 300 3/4 500 Vpk 400 3 Vpk Cathode-Gate Current VKGM Operating Temperature -65 to +125 Storage Junction Temp Tstg -65 to +150 1 This average forward current is for an ambient temperature of 800C and 180 electrical degrees of conduction. 2 Surge current is non-recurrent. The rate of rise of peak surge current shall not exceed 40 A during the first 5 µs after switching from the ‘off’ blocking to the ‘on’ conducting state. This is measured TO-5 from the point where the thyristor voltage has decayed to 90% of its initial blocking value. 3 Gate connected to cathode through 1,000 ohm resistor. 4 Gate connected to cathode through 2,000 ohm resistor. *See appendix A for package outline ELECTRICAL CHARACTERISTICS |
| More datasheets: SE1450-003 | SE1450-004 | SE1450-001 | SE1450-002L | SE1450-004L | SE1450-001L | SE1450-002 | JANTX2N2323A | JAN2N2324S | JAN2N2329AS |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JAN2N2324 Datasheet file may be downloaded here without warranties.