MTFDDAA128MAM-1J12

MTFDDAA128MAM-1J12 Datasheet

MTFDDAA128MAM, MTFDDAA256MAM, MTFDDAA512MAM

Part	Datasheet
MTFDDAA128MAM-1J12	MTFDDAA128MAM-1J12 (pdf)

Related Parts	Information
MTFDDAA256MAM-1K1	MTFDDAA256MAM-1K1
MTFDDAA512MAM-1K1	MTFDDAA512MAM-1K1
MTFDDAA128MAM-1J1	MTFDDAA128MAM-1J1
MTFDDAA256MAM-1K12	MTFDDAA256MAM-1K12

PDF Datasheet Preview
C400 1.8-Inch NAND Flash SSD Features C400 1.8-Inch SATA NAND Flash SSD MTFDDAA128MAM, MTFDDAA256MAM, MTFDDAA512MAM • 25mm MLC NAND Flash • RoHS-compliant package • SATA 6 Gb/s interface • ATA modes supported PIO mode 3, 4 Multiword DMA mode 0, 1, 2 Ultra DMA mode 0, 1, 2, 3, 4, 5 • Industry-standard, 512-byte sector size support • Hot-plug capable • Native command queuing support with 32-command slot support • ATA-8 ACS2 command set compliant • ATA security feature command set and password login support • Secure erase data page command set fast and secure erase • Self-monitoring, analysis, and reporting technology SMART command set • Performance1, 2 Sequential 128k READ up to 500 MB/s Sequential 128k WRITE up to 260 MB/s Random 4k READ up to 45,000 IOPS Random 4k WRITE up to 50,000 IOPS Vantage HDD test suite score up to 75,000 READ/WRITE latency 55µs TYP • Reliability MTBF million device hours3 Static and dynamic wear leveling Uncorrectable bit error rate UBER <1 sector per 1015 bits read Low power consumption <280mW TYP4 • Endurance Total bytes written TBW 72TB • Capacity5 unformatted 128GB, 256GB, 512GB • Mechanical 5mm height Micro SATA connector 3.3V ±5% 1.8-inch drive 78.5mm x 54mm x 5mm Weight 45g MAX • Field-updateable firmware • Operating temperature Commercial 0°C to +70°C 6 Typical I/O performance numbers as measured using Iometer with a queue depth of 32 and write cache enabled. 4K transfers used for READ/WRITE latency values. The product achieves a mean time between failure MTBF based on population statistics not relevant to individual units. Active power measured during execution of 2007 with DIPM device-initiated power management enabled. 1GB = 1 billion bytes formatted capacity is less. Drive case temperature. Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice. C400 1.8-Inch NAND Flash SSD Features Part Numbering Information Micron’s RealSSD C400 SSD is available in different configurations and densities. Visit for a list of valid part numbers. Figure 1 Part Number Chart Micron Technology Product Family FD = Flash drive Drive Interface D = SATA Gb/s Drive Form Factor AA = 1.8-inch 5mm Drive Density 128 = 128GB 256 = 256GB 512 = 512GB NAND Flash Type M = MLC Product Family AM = C400 MT FD D AA xxx M AM - 1 K 1 x xx Production Status Blank = Production ES = Engineering sample Operating Temperature Range Blank = Commercial 0°C to +70°C Hardware Feature Set Blank = Null AA = Contact factory AB = Contact factory AC = Contact factory Firmware Feature Set Blank = Null 1 = Contact factory 2 = Contact factory NAND Flash Component J = 32Gb, MLC, x8, 3.3V 25nm K = 64Gb, MLC, x8, 3.3V 25nm Sector Size 1 = 512-byte Warranty Micron makes no warranties, expressed or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, other warranties that might arise from course of dealing or custom of trade other than that micron warrants only that the product complies with Micron's specification sheet for the product at the time of delivery, provided that deviations from specifications which do not materially affect performance of such product in the system and configuration in or for which it is initially installed or qualified by customer shall not be deemed to constitute failure to comply with such specifications. Any claim against Micron must be made within three 3 years from the date of shipment by Micron and Micron has no liability thereafter. Micron's liability is limited to repair or replacement of the defective product or credit or refund of the purchase price of the defective product, provided that Micron may elect refund in lieu of credit, replacement or repair. Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved. C400 1.8-Inch NAND Flash SSD General Description Micron’s RealSSD solid state drive SSD uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures. The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability. Figure 2 Functional Block Diagram

PDF Datasheet Preview

C400 1.8-Inch NAND Flash SSD Features

C400 1.8-Inch SATA NAND Flash SSD

MTFDDAA128MAM, MTFDDAA256MAM, MTFDDAA512MAM
• 25mm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported

PIO mode 3, 4 Multiword DMA mode 0, 1, 2 Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queuing support with 32-command slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password login support
• Secure erase data page command set fast and secure erase
• Self-monitoring, analysis, and reporting technology SMART command set
• Performance1, 2 Sequential 128k READ up to 500 MB/s Sequential 128k WRITE up to 260 MB/s Random 4k READ up to 45,000 IOPS Random 4k WRITE up to 50,000 IOPS Vantage HDD test suite score up to
75,000 READ/WRITE latency 55µs TYP
• Reliability MTBF million device hours3 Static and dynamic wear leveling Uncorrectable bit error rate UBER <1 sector per 1015 bits read Low power consumption <280mW TYP4
• Endurance Total bytes written TBW 72TB
• Capacity5 unformatted 128GB, 256GB, 512GB
• Mechanical 5mm height

Micro SATA connector 3.3V ±5% 1.8-inch drive 78.5mm x 54mm x 5mm Weight 45g MAX
• Field-updateable firmware
• Operating temperature Commercial 0°C to +70°C 6

Typical I/O performance numbers as measured using Iometer with a queue depth of 32 and write cache enabled.
4K transfers used for READ/WRITE latency values.

The product achieves a mean time between failure MTBF based on population statistics not relevant to individual units.

Active power measured during execution of 2007 with DIPM device-initiated power management enabled.
1GB = 1 billion bytes formatted capacity is less.

Drive case temperature.

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved.

Products and specifications discussed herein are subject to change by Micron without notice.

C400 1.8-Inch NAND Flash SSD Features

Part Numbering Information

Micron’s RealSSD C400 SSD is available in different configurations and densities. Visit for a list of valid part numbers.

Figure 1 Part Number Chart

Micron Technology

Product Family FD = Flash drive

Drive Interface D = SATA Gb/s

Drive Form Factor AA = 1.8-inch 5mm

Drive Density 128 = 128GB 256 = 256GB 512 = 512GB

NAND Flash Type M = MLC

Product Family AM = C400

MT FD D AA xxx M AM - 1 K 1 x xx

Production Status Blank = Production ES = Engineering sample

Operating Temperature Range Blank = Commercial 0°C to +70°C

Hardware Feature Set Blank = Null AA = Contact factory AB = Contact factory AC = Contact factory

Firmware Feature Set Blank = Null 1 = Contact factory 2 = Contact factory

NAND Flash Component J = 32Gb, MLC, x8, 3.3V 25nm K = 64Gb, MLC, x8, 3.3V 25nm

Sector Size 1 = 512-byte

Warranty Micron makes no warranties, expressed or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose, other warranties that might arise from course of dealing or custom of trade other than that micron warrants only that the product complies with Micron's specification sheet for the product at the time of delivery, provided that deviations from specifications which do not materially affect performance of such product in the system and configuration in or for which it is initially installed or qualified by customer shall not be deemed to constitute failure to comply with such specifications. Any claim against Micron must be made within three 3 years from the date of shipment by Micron and Micron has no liability thereafter. Micron's liability is limited to repair or replacement of the defective product or credit or refund of the purchase price of the defective product, provided that Micron may elect refund in lieu of credit, replacement or repair.

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved.

C400 1.8-Inch NAND Flash SSD General Description

Micron’s RealSSD solid state drive SSD uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.

The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability.

Figure 2 Functional Block Diagram

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MTFDDAA128MAM-1J12 Datasheet file may be downloaded here without warranties.

Datasheet ID: MTFDDAA128MAM-1J12 648526