USB3316B-GJ-TR

USB3316B-GJ-TR Datasheet


USB3316

Part Datasheet
USB3316B-GJ-TR USB3316B-GJ-TR USB3316B-GJ-TR (pdf)
Related Parts Information
USB3316B-CP-TR USB3316B-CP-TR USB3316B-CP-TR
USB3316D-GJ-TR USB3316D-GJ-TR USB3316D-GJ-TR
PDF Datasheet Preview
USB3316

Hi-Speed USB Transceiver with 1.8V ULPI Interface 19.2MHz Reference Clock

PRODUCT FEATURES

Data Brief
- USB-IF “Hi-Speed” compliant to the Universal Serial Bus Specification Rev
- 1.8V IO Voltage ±10% - Technology

Low current design ideal for battery powered applications
“Sleep” mode tri-states all ULPI pins and places the part in a low current state
- Supports FS pre-amble for FS hubs with a LS device attached UTMI+ Level 3
- Supports HS SOF and LS keep-alive pulse
- Supports the OTG Host Negotiation Protocol HNP and Session Request Protocol SRP
- Allows host to turn VBUS off to conserve battery power in OTG applications
- Support OTG monitoring of VBUS levels with internal comparators
- “Wrapper-less” design for optimal timing performance and design ease

Low Latency Hi-Speed Receiver 43 Hi-Speed clocks Max allows use of legacy UTMI Links with a ULPI bridge
- Internal 5V cable short-circuit protection of ID, DP and DM lines to VBUS or ground
- 19.2MHz Reference Clock Operation
0 to 3.6V input drive tolerant Able to accept “noisy” clock sources
- Internal low jitter PLL for 480MHz Hi-Speed USB operation
- Internal detection of the value of resistance to ground on the ID pin
- Integrated battery to 3.3V LDO regulator
2.2uF bypass capacitor 100mV dropout voltage
- Integrated ESD protection circuits Up to ±15kV without any external devices
- Carkit UART mode for non-USB serial data transfers - Integrated USB Switch

Allows single USB port of connection High speed data Battery charging Stereo and mono/mic audio USB1.1 data
- Industrial Operating Temperature -40°C to +85°C - Packaging Options
24 pin QFN lead-free RoHS compliant package 4 x 4 x mm height
25 ball VFBGA lead-free RoHS compliant package also available 3 x 3 x 0.88mm height
25 ball UFBGA lead-free RoHS compliant package also available 3 x 3 x 0.61mm height

The USB3316 is targeted for any application where a HiSpeed USB connection is desired and when board space, power, and interface pins must be minimized.

The USB3316 is well suited for - Cell Phones - PDAs - MP3 Players - GPS Personal Navigation - Scanners - External Hard Drives - Digital Still and Video Cameras - Portable Media Players - Entertainment Devices - Printers - Set Top Boxes - Video Record/Playback Systems - IP and Video Phones - Gaming Consoles - POS Terminals

PRODUCT PREVIEW

Hi-Speed USB Transceiver with 1.8V ULPI Interface - 19.2MHz Reference Clock

Order Number s USB3316C-CP-TR FOR 24 PIN, QFN LEAD-FREE ROHS COMPLIANT PACKAGE TAPE AND REEL USB3316C-GJ-TR FOR 25 PIN, VFBGA LEAD-FREE ROHS COMPLIANT PACKAGE TAPE AND REEL USB3316C-GM-TR FOR 25 PIN, UFBGA LEAD-FREE ROHS COMPLIANT PACKAGE TAPE AND REEL

REEL SIZE IS 4000 PIECES.

This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 631 435-6000, FAX 631 273-3123

Copyright 2010 SMSC or its subsidiaries. All rights reserved.

Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order the "Terms of Sale Agreement" . The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at SMSC is a registered trademark of Standard Microsystems Corporation “SMSC” . Product names and company names are the trademarks of their respective holders.

PRODUCT PREVIEW

Hi-Speed USB Transceiver with 1.8V ULPI Interface - 19.2MHz Reference Clock
More datasheets: LX1993CDU-T | LX1993CDU | MDM-21PSF | KPSE6F16-8SDX | MTPS9085NJ1 | MCBTMPM362 | MCBTMPM364 | SPU30N03S2-08 | IPB093N04LGATMA1 | DDM-43W2S-A197


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived USB3316B-GJ-TR Datasheet file may be downloaded here without warranties.

Datasheet ID: USB3316B-GJ-TR 648263