SST25VF080B-80-4C-S2AE-T

SST25VF080B-80-4C-S2AE-T Datasheet

SST25VF080B

Part	Datasheet
SST25VF080B-80-4C-S2AE-T	SST25VF080B-80-4C-S2AE-T (pdf)

Related Parts	Information
SST25VF080B-80-4I-S2AE	SST25VF080B-80-4I-S2AE
SST25VF080B-80-4I-QAE	SST25VF080B-80-4I-QAE
SST25VF080B-80-4C-QAE	SST25VF080B-80-4C-QAE
SST25VF080B-80-4C-S2AE	SST25VF080B-80-4C-S2AE
SST25VF080B-80-4C-QAE-T	SST25VF080B-80-4C-QAE-T
SST25VF080B-80-4C-SAE-T	SST25VF080B-80-4C-SAE-T
SST25VF080B-80-4C-SAE	SST25VF080B-80-4C-SAE
SST25VF080B-80-4I-QAE-T	SST25VF080B-80-4I-QAE-T
SST25VF080B-80-4I-SAE-T	SST25VF080B-80-4I-SAE-T
SST25VF080B-80-4I-S2AE-T	SST25VF080B-80-4I-S2AE-T
SST25VF080B-80-4I-SAE	SST25VF080B-80-4I-SAE

PDF Datasheet Preview
A Microchip Technology Company 8 Mbit SPI Serial Flash SST25VF080B Data Sheet SST's 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF080B devices are enhanced with improved operating frequency and lower power consumption. SST25VF080B SPI serial flash memories are manufactured with SST's proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. • Single Voltage Read and Write Operations 2.7-3.6V • Serial Interface Architecture SPI Compatible Mode 0 and Mode 3 • High Speed Clock Frequency 50/66 MHz conditional see Table 14 - SST25VF080B-50-xx-xxxx 80 MHz - SST25VF080B-80-xx-xxxx • Superior Reliability Endurance 100,000 Cycles typical Greater than 100 years Data Retention • Low Power Consumption Active Read Current 10 mA typical Standby Current 5 µA typical • Flexible Erase Capability Uniform 4 KByte sectors Uniform 32 KByte overlay blocks Uniform 64 KByte overlay blocks • Fast Erase and Byte-Program Chip-Erase Time 35 ms typical Sector-/Block-Erase Time 18 ms typical Byte-Program Time 7 µs typical • Auto Address Increment AAI Programming Decrease total chip programming time over Byte-Program operations • End-of-Write Detection Software polling the BUSY bit in Status Register Busy Status readout on SO pin in AAI Mode • Hold Pin HOLD# Suspends a serial sequence to the memory without deselecting the device • Write Protection WP# Enables/Disables the Lock-Down function of the status register • Software Write Protection Write protection through Block-Protection bits in status register • Temperature Range Commercial 0°C to +70°C Industrial -40°C to +85°C • Packages Available 8-lead SOIC 200 mils 8-lead SOIC 150 mils 8-contact WSON 6mm x 5mm 8-lead PDIP 300 mils • All devices are RoHS compliant 2011 Silicon Storage Technology, Inc. DS25045A 09/11 A Microchip Technology Company 8 Mbit SPI Serial Flash SST25VF080B Product Description Data Sheet SST’s 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF080B devices are enhanced with improved operating frequency and lower power consumption. SST25VF080B SPI serial flash memories are manufactured with SST’s proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST25VF080B devices significantly improve performance and reliability, while lowering power consumption. The devices write Program or Erase with a single power supply of 2.7-3.6V for SST25VF080B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies. The SST25VF080B device is offered in 8-lead SOIC 200 mils , 8-lead SOIC 150 mils , 8-contact WSON 6mm x 5mm , and 8-lead PDIP 300 mils packages. See Figure 2 for pin assignments. 2011 Silicon Storage Technology, Inc. DS25045A 09/11 A Microchip Technology Company Block Diagram 8 Mbit SPI Serial Flash SST25VF080B Data Sheet Address Buffers and Latches Product Ordering Information 8 Mbit SPI Serial Flash SST25VF080B Data Sheet SST 25 VF 080B - 80 - 4C - S2AE XX XXXX - XX - XX - XXXX Environmental Attribute E1 = non-Pb / non-Sn contact lead finish F2 = non-Pb / non-Sn contact lead finish Nickel plating with Gold top outer layer Package Modifier A = 8 leads or contacts Package Type S = SOIC 150 mil body width S2 = SOIC 200 mil body width Q = WSON P= PDIP 300 mil body width Temperature Range C = Commercial = 0°C to +70°C I = Industrial = -40°C to +85°C Minimum Endurance 4 = 10,000 cycles Operating Frequency 50 = 50 MHz 80 = 80 MHz Device Density 080 = 8 Mbit Voltage V = 2.7-3.6V Product Series 25 = Serial Peripheral Interface flash memory Environmental suffix “E” denotes non-Pb solder. SST non-Pb solder devices are “RoHS Compliant”. Environmental suffix “F” denotes non-Pb/non-SN solder. SST non-Pb/non-Sn solder devices are “RoHS Compliant”. 2011 Silicon Storage Technology, Inc. DS25045A 09/11 A Microchip Technology Company 8 Mbit SPI Serial Flash SST25VF080B Valid Combinations for SST25VF080B SST25VF080B-50-4C-S2AF SST25VF080B-50-4C-QAF SST25VF080B-50-4I-S2AF SST25VF080B-50-4I-QAF Data Sheet SST25VF080B-50-4C-PAE SST25VF080B-80-4C-S2AE SST25VF080B-80-4C-QAE SST25VF080B-80-4I-S2AE SST25VF080B-80-4I-QAE SST25VF080B-80-4C-SAE SST25VF080B-80-4I-SAE Note:Valid combinations are those products in mass production or will be in mass production. Consult your SST sales representative to confirm availability of valid combinations and to determine availability of new combinations. 2011 Silicon Storage Technology, Inc. DS25045A 09/11 A Microchip Technology Company Packaging Diagrams Pin #1 Identifier TOP VIEW 8 Mbit SPI Serial Flash SST25VF080B Data Sheet SIDE VIEW Note All linear dimensions are in millimeters max/min . Coplanarity mm Maximum allowable mold flash is mm at the package ends and mm between leads. END VIEW Modified “Features”, “Product Description”, “Pin Description”, “Product Ordering Information”, and “Packaging Diagrams” to include the PAE package. Updated Figures 10 and 11 on page Added 80 MHz High Speed Clock Frequency to Features Removed Maximum Frequency from Table 5 on page 9 Edited “Read 25/33 MHz ” on page 10 and “High-Speed-Read 66/80 MHz ” on page Added Table 11 on page 24 and Table 15 on page 26 Edited Product Ordering Information Added Valid Combinations SST25VF080B-80-4C-S2AE, SST25VF080B-80-4I-S2AE, SST25VF080B-80-4C-QAE, and SST25VF080B-80-4I-QAE Date Sep 2005 Jan 2006 Jun 2007 Mar 2009 Jan 2010 Feb 2011 Sep 2011 2011 Silicon Storage Technology, Inc. DS25045A 09/11 A Microchip Technology Company 8 Mbit SPI Serial Flash SST25VF080B Data Sheet ISBN:978-1-61341-648-8 2011 Silicon Storage Technology, Microchip Technology Company. All rights reserved. SST, Silicon Storage Technology, the SST logo, SuperFlash, MTP, and FlashFlex are registered trademarks of Silicon Storage Technology, Inc. MPF, SQI, Serial Quad I/O, and Z-Scale are trademarks of Silicon Storage Technology, Inc. All other trademarks and registered trademarks mentioned herein are the property of their respective owners. Specifications are subject to change without notice. Refer to for the most recent documentation. For the most current package drawings, please see the Packaging Specification located at Memory sizes denote raw storage capacity actual usable capacity may be less. SST makes no warranty for the use of its products other than those expressly contained in the Standard Terms and Conditions of Sale. For sales office locations and information, please see Silicon Storage Technology, Inc. A Microchip Technology Company 2011 Silicon Storage Technology, Inc. DS25045A 09/11

PDF Datasheet Preview

A Microchip Technology Company
8 Mbit SPI Serial Flash

SST25VF080B

Data Sheet

SST's 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF080B devices are enhanced with improved operating frequency and lower power consumption. SST25VF080B SPI serial flash memories are manufactured with SST's proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.
• Single Voltage Read and Write Operations 2.7-3.6V
• Serial Interface Architecture SPI Compatible Mode 0 and Mode 3
• High Speed Clock Frequency 50/66 MHz conditional see Table 14 - SST25VF080B-50-xx-xxxx 80 MHz - SST25VF080B-80-xx-xxxx
• Superior Reliability Endurance 100,000 Cycles typical Greater than 100 years Data Retention
• Low Power Consumption Active Read Current 10 mA typical Standby Current 5 µA typical
• Flexible Erase Capability Uniform 4 KByte sectors Uniform 32 KByte overlay blocks Uniform 64 KByte overlay blocks
• Fast Erase and Byte-Program Chip-Erase Time 35 ms typical Sector-/Block-Erase Time 18 ms typical Byte-Program Time 7 µs typical
• Auto Address Increment AAI Programming Decrease total chip programming time over Byte-Program operations
• End-of-Write Detection Software polling the BUSY bit in Status Register Busy Status readout on SO pin in AAI Mode
• Hold Pin HOLD# Suspends a serial sequence to the memory without deselecting the device
• Write Protection WP# Enables/Disables the Lock-Down function of the status register
• Software Write Protection Write protection through Block-Protection bits in status register
• Temperature Range Commercial 0°C to +70°C Industrial -40°C to +85°C
• Packages Available 8-lead SOIC 200 mils 8-lead SOIC 150 mils 8-contact WSON 6mm x 5mm 8-lead PDIP 300 mils
• All devices are RoHS compliant
2011 Silicon Storage Technology, Inc.

DS25045A
09/11

A Microchip Technology Company
8 Mbit SPI Serial Flash

SST25VF080B

Product Description

Data Sheet

SST’s 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF080B devices are enhanced with improved operating frequency and lower power consumption. SST25VF080B SPI serial flash memories are manufactured with SST’s proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

The SST25VF080B devices significantly improve performance and reliability, while lowering power consumption. The devices write Program or Erase with a single power supply of 2.7-3.6V for SST25VF080B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies.

The SST25VF080B device is offered in 8-lead SOIC 200 mils , 8-lead SOIC 150 mils , 8-contact WSON 6mm x 5mm , and 8-lead PDIP 300 mils packages. See Figure 2 for pin assignments.
2011 Silicon Storage Technology, Inc.

DS25045A
09/11

A Microchip Technology Company

Block Diagram
8 Mbit SPI Serial Flash

SST25VF080B

Data Sheet

Address Buffers
and Latches
Product Ordering Information
8 Mbit SPI Serial Flash

SST25VF080B

Data Sheet

SST 25 VF 080B - 80 - 4C - S2AE XX XXXX - XX - XX - XXXX

Environmental Attribute E1 = non-Pb / non-Sn contact lead finish F2 = non-Pb / non-Sn contact lead finish Nickel plating with Gold top outer layer

Package Modifier A = 8 leads or contacts

Package Type S = SOIC 150 mil body width S2 = SOIC 200 mil body width Q = WSON P= PDIP 300 mil body width

Temperature Range C = Commercial = 0°C to +70°C I = Industrial = -40°C to +85°C

Minimum Endurance 4 = 10,000 cycles

Operating Frequency 50 = 50 MHz 80 = 80 MHz

Device Density 080 = 8 Mbit

Voltage V = 2.7-3.6V

Product Series 25 = Serial Peripheral Interface flash memory

Environmental suffix “E” denotes non-Pb solder. SST non-Pb solder devices are “RoHS Compliant”.

Environmental suffix “F” denotes non-Pb/non-SN solder. SST non-Pb/non-Sn solder devices are “RoHS Compliant”.
2011 Silicon Storage Technology, Inc.

DS25045A
09/11

A Microchip Technology Company
8 Mbit SPI Serial Flash

SST25VF080B

Valid Combinations for SST25VF080B

SST25VF080B-50-4C-S2AF SST25VF080B-50-4C-QAF SST25VF080B-50-4I-S2AF SST25VF080B-50-4I-QAF

Data Sheet SST25VF080B-50-4C-PAE

SST25VF080B-80-4C-S2AE SST25VF080B-80-4C-QAE SST25VF080B-80-4I-S2AE SST25VF080B-80-4I-QAE

SST25VF080B-80-4C-SAE SST25VF080B-80-4I-SAE

Note:Valid combinations are those products in mass production or will be in mass production. Consult your SST sales representative to confirm availability of valid combinations and to determine availability of new combinations.
2011 Silicon Storage Technology, Inc.

DS25045A
09/11

A Microchip Technology Company

Packaging Diagrams

Pin #1 Identifier

TOP VIEW
8 Mbit SPI Serial Flash

SST25VF080B

Data Sheet

SIDE VIEW

Note All linear dimensions are in millimeters max/min . Coplanarity mm Maximum allowable mold flash is mm at the package ends and mm between leads.

END VIEW
Modified “Features”, “Product Description”, “Pin Description”, “Product Ordering Information”, and “Packaging Diagrams” to include the PAE package. Updated Figures 10 and 11 on page
Added 80 MHz High Speed Clock Frequency to Features Removed Maximum Frequency from Table 5 on page 9 Edited “Read 25/33 MHz ” on page 10 and “High-Speed-Read 66/80 MHz ” on page Added Table 11 on page 24 and Table 15 on page 26 Edited Product Ordering Information Added Valid Combinations SST25VF080B-80-4C-S2AE, SST25VF080B-80-4I-S2AE, SST25VF080B-80-4C-QAE, and SST25VF080B-80-4I-QAE
Date Sep 2005 Jan 2006 Jun 2007 Mar 2009 Jan 2010

Feb 2011

Sep 2011
2011 Silicon Storage Technology, Inc.

DS25045A
09/11

A Microchip Technology Company
8 Mbit SPI Serial Flash

SST25VF080B

Data Sheet

ISBN:978-1-61341-648-8 2011 Silicon Storage Technology, Microchip Technology Company. All rights reserved.

SST, Silicon Storage Technology, the SST logo, SuperFlash, MTP, and FlashFlex are registered trademarks of Silicon Storage Technology, Inc. MPF, SQI, Serial Quad I/O, and Z-Scale are trademarks of Silicon Storage Technology, Inc. All other trademarks and registered trademarks mentioned herein are the property of their respective owners. Specifications are subject to change without notice. Refer to for the most recent documentation. For the most current package drawings, please see the Packaging Specification located at Memory sizes denote raw storage capacity actual usable capacity may be less. SST makes no warranty for the use of its products other than those expressly contained in the Standard Terms and Conditions of Sale. For sales office locations and information, please see

Silicon Storage Technology, Inc. A Microchip Technology Company
2011 Silicon Storage Technology, Inc.

DS25045A
09/11

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SST25VF080B-80-4C-S2AE-T Datasheet file may be downloaded here without warranties.

Datasheet ID: SST25VF080B-80-4C-S2AE-T 648208