PIC24F16KA304-E/PT

PIC24F16KA304-E/PT Datasheet


PIC24FV32KA304 FAMILY

Part Datasheet
PIC24F16KA304-E/PT PIC24F16KA304-E/PT PIC24F16KA304-E/PT (pdf)
Related Parts Information
PIC24FV16KA304-E/MV PIC24FV16KA304-E/MV PIC24FV16KA304-E/MV
PIC24F16KA304-E/MV PIC24F16KA304-E/MV PIC24F16KA304-E/MV
PIC24FV16KA301-E/SO PIC24FV16KA301-E/SO PIC24FV16KA301-E/SO
PIC24FV16KA301-E/P PIC24FV16KA301-E/P PIC24FV16KA301-E/P
PIC24FV16KA302-E/ML PIC24FV16KA302-E/ML PIC24FV16KA302-E/ML
PIC24F16KA302-E/ML PIC24F16KA302-E/ML PIC24F16KA302-E/ML
PIC24F32KA301T-I/SO PIC24F32KA301T-I/SO PIC24F32KA301T-I/SO
PIC24F16KA301-E/SO PIC24F16KA301-E/SO PIC24F16KA301-E/SO
PIC24FV32KA302-E/ML PIC24FV32KA302-E/ML PIC24FV32KA302-E/ML
PDF Datasheet Preview
PIC24FV32KA304 FAMILY
20/28/44/48-Pin, General Purpose, 16-Bit Flash Microcontrollers with XLP Technology

Power Management Modes
• Run CPU, Flash, SRAM and Peripherals On
• Doze CPU Clock Runs Slower than Peripherals
• Idle CPU Off, Flash, SRAM and Peripherals On
• Sleep CPU, Flash and Peripherals Off, and

SRAM On
• Deep Sleep CPU, Flash, SRAM and Most Peripherals

Off Multiple Autonomous Wake-up Sources
• Low-Power Consumption:
- Run mode currents down to 8 uA, typical - Idle mode currents down to uA, typical - Deep Sleep mode currents down to 20 nA, typical - Real-Time Clock/Calendar currents down to
700 nA, 32 kHz, 1.8V - Watchdog Timer is 500 nA, 1.8V typical

High-Performance CPU
• Modified Harvard Architecture
• Up to 16 MIPS Operation 32 MHz
• 8 MHz Internal Oscillator with 4x PLL Option and

Multiple Divide Options
• 17-Bit by 17-Bit Single-Cycle Hardware Multiplier
• 32-Bit by 16-Bit Hardware Divider, 16-Bit x 16-Bit

Working Register Array
• C Compiler Optimized Instruction Set Architecture

Peripheral Features
• Hardware Real-Time Clock and Calendar RTCC - Provides clock, calendar and alarm functions - Can run in Deep Sleep mode - Can use 50/60 Hz power line input as clock source
• Programmable 32-Bit Cyclic Redundancy Check CRC
• Multiple Serial Communication modules - Two 3/4-wire SPI modules - Two I2C modules with multi-master/slave support - Two UART modules supporting RS-485, RS-232, LIN/J2602,
• Five 16-Bit Timers/Counters with Programmable Prescaler - Can be paired as 32-bit timers/counters
• Three 16-Bit Capture Inputs with Dedicated Timers
• Three 16-Bit Compare/PWM Outputs with Dedicated

Timers
• Configurable Open-Drain Outputs on Digital I/O Pins
• Up to Three External Interrupt Sources

Analog Features
• 12-Bit, Up to 16-Channel Analog-to-Digital Converter - 100 ksps conversion rate - Conversion available during Sleep and Idle - Auto-sampling, timer-based option for Sleep and Idle modes - Wake on auto-compare option
• Dual Rail-to-Rail Analog Comparators with Programmable Input/Output Configuration
• On-Chip Voltage Reference
• Internal Temperature Sensor
• Charge Time Measurement Unit CTMU :
- Used for capacitance sensing, 16 channels - Time measurement, down to 200 ps resolution - Delay/pulse generation, down to 1 ns resolution

Special Microcontroller Features
• Wide Operating Voltage Range - 1.8V to 3.6V PIC24F devices - 2.0V to 5.5V PIC24FV devices
• Low-Power Wake-up Sources and Supervisors - Ultra Low-Power Wake-up ULPWU for Sleep/Deep Sleep - Low-Power Watchdog Timer DSWDT for Deep Sleep - Extreme Low-Power Brown-out Reset DSBOR for Deep Sleep, LPBOR for all other modes
• System Frequency Range Declaration bits - Declaring the frequency range optimizes the current consumption.
• Standard Watchdog Timer WDT with On-Chip, Low-Power RC Oscillator for Reliable Operation
• Programmable High/Low-Voltage Detect HLVD
• Standard Brown-out Reset BOR with 3 Programmable

Trip Points that can be Disabled in Sleep
• High-Current Sink/Source 18 mA/18 mA on All I/O Pins
• Flash Program Memory:
- Erase/write cycles 10,000 minimum - 40 years’ data retention minimum
• Data EEPROM - Erase/write cycles 100,000 minimum - 40 years’ data retention minimum
• Fail-Safe Clock Monitor FSCM
• Programmable Reference Clock Output
• Self-Programmable under Software Control
• In-Circuit Serial Programming ICSP and In-Circuit Debug ICD via 2 Pins
2011-2013 Microchip Technology Inc.

DS39995D-page 1

Pins Flas h Program bytes SRAM bytes EE Data bytes

Timers 16-Bit Capture Input Compare/PWM Output UART w/

SPI I2C 12-Bit A/D ch Comparators CTMU ch RTCC

PIC24FV32KA304 FAMILY

PIC24F Device

Memory

PIC24FV16KA301/ 20 16K
• Business of Microchip Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives

CUSTOMER CHANGE NOTIFICATION SERVICE

To register, access the Microchip web site at Under “Support”, click on “Customer Change Notification” and follow the registration instructions.

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer FAE
• Technical Support
• Development Systems Information Line

Customers should contact their distributor, representative or field application engineer FAE for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document.

Technical support is available through the web site at:
2011-2013 Microchip Technology Inc.

DS39995D-page 359

PIC24FV32KA304 FAMILY

READER RESPONSE

It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip product. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation can better serve you, please FAX your comments to the Technical Publications Manager at 480

Please list the following information, and use this outline to provide us with your comments about this document.

TO Technical Publications Manager RE Reader Response

From Name Company Address City / State / ZIP / Country Telephone -

Application optional :

Would you like a reply? Y

Device PIC24FV32KA304 Family

Total Pages Sent

FAX - Literature Number DS39995D

Questions What are the best features of this document?

How does this document meet your hardware and software development needs?

Do you find the organization of this document easy to follow? If not, why?

What additions to the document do you think would enhance the structure and subject?

What deletions from the document could be made without affecting the overall usefulness?

Is there any incorrect or misleading information what and where ?

How would you improve this document?

DS39995D-page 360
2011-2013 Microchip Technology Inc.

PIC24FV32KA304 FAMILY

PRODUCT IDENTIFICATION SYSTEM

To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.

PIC 24 FV 32 KA3 04 T - I / PT - XXX

Microchip Trademark Architecture Flash Memory Family Program Memory Size KB Product Group Pin Count Tape and Reel Flag if applicable Temperature Range Package Pattern

Examples:
a PIC24FV32KA304-I/ML Wide voltage range, General Purpose, 32-Kbyte program memory, 44-pin, Industrial temp., QFN package
b PIC24F16KA302-I/SS Standard voltage range, General Purpose, 16-Kbyte program memory, 28-pin, Industrial temp., SSOP package

Architecture
24 = 16-bit modified Harvard without DSP

Flash Memory Family F = Standard voltage range Flash program memory FV = Wide voltage range Flash program memory
More datasheets: JAN2N2324S | JAN2N2329AS | JAN2N2324 | JANTX2N2323AS | JAN2N2326 | JAN2N2329 | TDA21301 | APTGF15H120T1G | PIC24FV16KA304-E/MV | PIC24F16KA304-E/MV


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PIC24F16KA304-E/PT Datasheet file may be downloaded here without warranties.

Datasheet ID: PIC24F16KA304-E/PT 648153