DM163004-LT

DM163004-LT Datasheet

Part Number DM163004-LT

Part	Datasheet
DM163004-LT	DM163004-LT (pdf)

PDF Datasheet Preview
PICDEM.net Internet/Ethernet Demonstration Board The PICDEM.net demonstration board is an Internet/Ethernet demonstration board using the PIC18F452 microcontroller and TCP/IP firmware. The board supports any 40-pin DIP device that conforms to the standard pin-out used by the PIC16F877 or PIC18F452. The board now uses the free Microchip TCP/IP Stack, which is available in Application Note AN833 DS00833 . Please refer to this document for code samples. The Microchip TCP/IP Stack is a suite of programs that can either provide services to standard TCP/IP-based applications Server, Mail Client, etc. or be used in a custom TCP/IP-based application. Potential users do not need to know all of the intricacies of the TCP/IP specifications to use it, and those interested only in the accompanying Server application need not have specific knowledge of TCP/IP. The TCP/IP stack is implemented in a modular fashion, with all of its services creating highly abstracted layers, each layer accessing services from one or more layers directly below it. The stack is written in the ‘C’ programming language, intended for both Microchip C18 and HI-TECH PICC 18 compilers, and is designed to run on Microchip's PIC18 family of microcontrollers only. Although, this particular implementation is specifically targeted to run on Microchip’s PICDEM.net Internet/ Ethernet demo board, it can be easily retargeted to any hardware equipped with a PIC18 microcontroller. The PICDEM.net supports Ethernet and RS-232 interfaces. With a standard web browser such as HTML web pages generated by the can be viewed. The initial board configuration is performed via the RS-232 port using a standard terminal program to configure the IP, Ethernet, etc., addresses for the board. The demo board is also equipped with a 6-pin modular connector to interface directly with the ICD 2 In-Circuit Debugger. With MPLAB ICD 2, the developer can now modify or reprogram the onboard Flash-based PICmicro device to meet the specific needs. A generous breadboarding area is also available to add special circuits for experimentation. The area is large enough to add an embedded modem to provide for dial-up capability. Several status indicators and user interface devices are provided, including a 16 x 2 LCD indicator and LEDs. • Free Microchip TCP/IP stack • Web server with HTML • 24L256 Serial EEPROM • Firmware for Xmodem to download web pages into Serial EEPROM • ICSP /ICD interface connector • Ethernet interface • RS-232 interface • 16 x 2 LCD display Package Contents • Demo Board • PIC18F452 MCU • TCP/IP stack by Microchip • MPLAB IDE Software • Demo and Evaluation Kit Software and Documentation • CAT-5 Ethernet Crossover Cable • DB9 Serial Cable • Universal Power Supply Host System Requirements • PC-compatible system with a Intel or higher processor, or equivalent • A minimum of 32 MB RAM • A minimum of 40 MB available hard drive space • CD-ROM drive for use with the accompanying CD • Available serial port • Microsoft Windows Windows 2000 or Windows XP System Description The PICDEM.net board is used to experiment with Microchip’s various TCP/IP solutions. The user has immediate network access after the initial set up of the IP address. The Flash microcontroller allows modifications to the demonstration program to add application software. The breadboard area includes a regulated 5V power supply for the addition of sensors or custom circuits for testing. Other standard or custom stack control software can be loaded for evaluation. Serial DB-9 PICDEM.net Block Diagram MCLR ICD RJ-11 Ethernet RJ45 Serial Port Interface RS-232 User User User User User PIC18F452 System 16 x t2exLt CD Ethernet Interface RTL8019S EEPROM Xmit Rx Linx Part Numbers and Ordering Information: Part Number DM163004-LT PICDEM.net Internet/Ethernet Demonstration Board Description PICDEM.net Demonstration Board Availability Now MPASM Assembler MPLINK Linker/MPLIB Librarian MPLAB SIM Simulator MPLAB C18 MPLAB C30 PICkit 1 MPLAB ICD 2 MPLAB ICE 2000 MPLAB ICE 4000 Plus Programmer MPLAB PM3 Device Programmer Kit Development Tools from Microchip Integrated Development Environment IDE Universal Linker/Librarian Software Simulator C Compiler for PIC18CXXX MCUs C Compiler for dsPIC30F MCUs Flash Starter Kit In-Circuit Debugger Full-featured Modular In-Circuit Emulator for PIC12, PIC16 and PIC18 MCUs Full-featured Modular In-Circuit Emulator for PIC18 and dsPIC MCUs Entry-level Development Kit with Programmer Full-featured, Modular Device Programmer Encoder/Decoder Evaluator 125 kHz and MHz RFID Development Tools Americas Atlanta Boston Chicago Dallas Detroit Kokomo Los Angeles Phoenix San Jose Toronto 770 640-0034 978 692-3848 630 285-0071 972 818-7423 248 538-2250 765 864-8360 949 462-9523 480 792-7200 650 215-1444 905 673-0699 Asia/Pacific Australia - Sydney China - Beijing China - Chengdu China - Fuzhou China - Hong Kong SAR China - Qingdao China - Shanghai China - Shenyang China - Shenzhen China - Shunde India - Bangalore Japan - Kanagawa Korea - Seoul Singapore Taiwan - Taipei Taiwan - Kaohsiung Taiwan - Hsinchu 61-2-9868-6733 86-10-8528-2100 86-28-8676-6200 86-591-8750-3506 852-2401-1200 86-532-502-7355 86-21-5407-5533 86-24-2334-2829 86-755-8203-2660 86-757-2839-5507 91-80-2229-0061 81-45-471-6166 82-2-554-7200 65-6334-8870 886-2-2500-6610 886-7-536-4818 886-3-572-9526 Europe Austria - Weis Denmark - Ballerup France - Massy Germany - Ismaning Italy - Milan Netherlands - Drunen England - Berkshire 43-7242-2244-399 45-4420-9895 33-1-69-53-63-20 49-89-627-144-0 39-0331-742611 31-416-690399 44-118-921-5869 As of 10/19/04 Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199 USA • 480 792-7200 • FAX 480 792-7277 The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and SmartShunt are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. AmpLab, FilterLab, MXDEV, MXLAB, PICMASTER, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, dsPICDEM, dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. 2004, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. 10/04 DS51240B DS51240B

PDF Datasheet Preview

PICDEM.net Internet/Ethernet Demonstration Board

The PICDEM.net demonstration board is an Internet/Ethernet demonstration board using the PIC18F452 microcontroller and TCP/IP firmware. The board supports any 40-pin DIP device that conforms to the standard pin-out used by the PIC16F877 or PIC18F452.

The board now uses the free Microchip TCP/IP Stack, which is available in Application Note AN833 DS00833 . Please refer to this document for code samples.

The Microchip TCP/IP Stack is a suite of programs that can either provide services to standard TCP/IP-based applications Server, Mail Client, etc. or be used in a custom TCP/IP-based application. Potential users do not need to know all of the intricacies of the TCP/IP specifications to use it, and those interested only in the accompanying Server application need not have specific knowledge of TCP/IP.

The TCP/IP stack is implemented in a modular fashion, with all of its services creating highly abstracted layers, each layer accessing services from one or more layers directly below it. The stack is written in the ‘C’ programming language, intended for both Microchip C18 and HI-TECH PICC 18 compilers, and is designed to run on Microchip's PIC18 family of microcontrollers only. Although, this particular implementation is specifically targeted to run on Microchip’s PICDEM.net Internet/ Ethernet demo board, it can be easily retargeted to any hardware equipped with a PIC18 microcontroller.

The PICDEM.net supports Ethernet and RS-232 interfaces. With a standard web browser such as HTML web pages generated by the can be viewed.

The initial board configuration is performed via the RS-232 port using a standard terminal program to configure the IP, Ethernet, etc., addresses for the board.

The demo board is also equipped with a 6-pin modular connector to interface directly with the ICD 2 In-Circuit Debugger. With MPLAB ICD 2, the developer can now modify or reprogram the onboard Flash-based PICmicro device to meet the specific needs. A generous breadboarding area is also available to add special circuits for experimentation. The area is large enough to add an embedded modem to provide for dial-up capability.

Several status indicators and user interface devices are provided, including a 16 x 2 LCD indicator and LEDs.
• Free Microchip TCP/IP stack
• Web server with HTML
• 24L256 Serial EEPROM
• Firmware for Xmodem to download web pages into

Serial EEPROM
• ICSP /ICD interface connector
• Ethernet interface
• RS-232 interface
• 16 x 2 LCD display

Package Contents
• Demo Board
• PIC18F452 MCU
• TCP/IP stack by Microchip
• MPLAB IDE Software
• Demo and Evaluation Kit Software and

Documentation
• CAT-5 Ethernet Crossover Cable
• DB9 Serial Cable
• Universal Power Supply

Host System Requirements
• PC-compatible system with a Intel or higher processor, or equivalent
• A minimum of 32 MB RAM
• A minimum of 40 MB available hard drive space
• CD-ROM drive for use with the accompanying CD
• Available serial port
• Microsoft Windows

Windows 2000 or Windows XP

System Description

The PICDEM.net board is used to experiment with Microchip’s various TCP/IP solutions. The user has immediate network access after the initial set up of the IP address. The Flash microcontroller allows modifications to the demonstration program to add application software. The breadboard area includes a regulated 5V power supply for the addition of sensors or custom circuits for testing. Other standard or custom stack control software can be loaded for evaluation.

Serial DB-9

PICDEM.net Block Diagram

MCLR

ICD RJ-11

Ethernet RJ45

Serial Port Interface RS-232

User

User

User

User

User

PIC18F452 System
16 x t2exLt CD

Ethernet Interface RTL8019S

EEPROM

Xmit Rx Linx
Part Numbers and Ordering Information:

Part Number DM163004-LT

PICDEM.net Internet/Ethernet Demonstration Board Description

PICDEM.net Demonstration Board

Availability Now

MPASM Assembler MPLINK Linker/MPLIB Librarian MPLAB SIM Simulator MPLAB C18 MPLAB C30 PICkit 1 MPLAB ICD 2 MPLAB ICE 2000 MPLAB ICE 4000 Plus Programmer MPLAB PM3 Device Programmer Kit

Development Tools from Microchip Integrated Development Environment IDE Universal Linker/Librarian Software Simulator C Compiler for PIC18CXXX MCUs C Compiler for dsPIC30F MCUs Flash Starter Kit In-Circuit Debugger Full-featured Modular In-Circuit Emulator for PIC12, PIC16 and PIC18 MCUs Full-featured Modular In-Circuit Emulator for PIC18 and dsPIC MCUs Entry-level Development Kit with Programmer Full-featured, Modular Device Programmer Encoder/Decoder Evaluator 125 kHz and MHz RFID Development Tools

Americas

Atlanta Boston Chicago Dallas Detroit Kokomo Los Angeles Phoenix San Jose Toronto
770 640-0034 978 692-3848 630 285-0071 972 818-7423 248 538-2250 765 864-8360 949 462-9523 480 792-7200 650 215-1444 905 673-0699

Asia/Pacific

Australia - Sydney China - Beijing China - Chengdu China - Fuzhou China - Hong Kong SAR China - Qingdao China - Shanghai China - Shenyang China - Shenzhen China - Shunde India - Bangalore Japan - Kanagawa Korea - Seoul Singapore Taiwan - Taipei Taiwan - Kaohsiung Taiwan - Hsinchu
61-2-9868-6733 86-10-8528-2100 86-28-8676-6200 86-591-8750-3506 852-2401-1200 86-532-502-7355 86-21-5407-5533 86-24-2334-2829 86-755-8203-2660 86-757-2839-5507 91-80-2229-0061 81-45-471-6166 82-2-554-7200 65-6334-8870 886-2-2500-6610 886-7-536-4818 886-3-572-9526

Europe

Austria - Weis Denmark - Ballerup France - Massy Germany - Ismaning Italy - Milan Netherlands - Drunen England - Berkshire
43-7242-2244-399 45-4420-9895 33-1-69-53-63-20 49-89-627-144-0 39-0331-742611 31-416-690399 44-118-921-5869

As of 10/19/04

Microchip Technology Inc.
• 2355 W. Chandler Blvd.
• Chandler, AZ 85224-6199 USA
• 480 792-7200
• FAX 480 792-7277

The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and SmartShunt are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. AmpLab, FilterLab, MXDEV, MXLAB, PICMASTER, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, dsPICDEM, dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. 2004, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. 10/04

DS51240B
*DS51240B*

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DM163004-LT Datasheet file may be downloaded here without warranties.

Datasheet ID: DM163004-LT 648085