SY100EL90VZG

SY100EL90VZG Datasheet


SY100EL90V

Part Datasheet
SY100EL90VZG SY100EL90VZG SY100EL90VZG (pdf)
Related Parts Information
SY100EL90VZG-TR SY100EL90VZG-TR SY100EL90VZG-TR
SY100EL90VZC SY100EL90VZC SY100EL90VZC
SY100EL90VZC-TR SY100EL90VZC-TR SY100EL90VZC-TR
SY100EL90VZI SY100EL90VZI SY100EL90VZI
SY100EL90VZI-TR SY100EL90VZI-TR SY100EL90VZI-TR
PDF Datasheet Preview
Micrel, Inc.
5V/3.3V TRIPLE ECL/LVECL-TOPECL/LVPECL TRANSLATOR

SY100EL90V

SY100EL90V
s 3.3V and 5V power supply options s 500ps propagation delay s Fully differential design s Supports both standard and low voltage operation s Available in 20-pin SOIC package

The SY100EL90V is a triple ECL/LVECL-to-PECL/ LVPECL translator. The device can translate over all combinations of supply voltages -5V ECL to 5V PECL, -5V ECL to 3.3V LVPECL, -3.3V LVECL to 5V PECL or -3.3V LVECL to 3.3V LVPECL.

A VBB output is provided for interfacing with single ended ECL signals at the input. If a single ended input is to be used, the VBB output should be connected to the D input. The active signal would then drive the D input. When used, the VBB output should be bypassed to via a 0.01µF capacitor. The VBB output is designed to act as the switching reference for the EL90V under single ended input switching conditions. As a result this pin can only source/sink up to 0.5mA of current.

To accomplish the level translation the EL90V requires three power rails. The VCC supply should be connected to the positive supply, and the VEE pin should be connected to the negative power supply. The GND pins as expected are connected to the system ground plane. Both VEE and VCC should be bypassed to ground via 0.01µF capacitors.

Under open input conditions, the D input will be biased at VCC/2 and the D input will be pulled to VEE. This condition will force the Q output to a LOW, ensuring stability.

FUNCTION TABLE

Function ECL to 5V PECL ECL to 3.3V LVPECL LVECL to 5V PECL LVECL to 3.3V LVPECL

VCC 5V 3.3V 5V 3.3V

GND 0V

PIN NAMES

Pin Dn Qn VBB

Function ECL/LVECL Inputs PECL/LVPECL Outputs ECL/LVECL Reference Voltage Output

M9999-031306 or 408 955-1690

Amendment /0

Isse Date March 2006

Micrel, Inc.

SY100EL90V
PACKAGE/ORDERING INFORMATION

VCC 1 D0 2 D0 3

VBB 4 D1 5 D1 6

VBB 7 D2 8 D2 9

VEE 10

PECL

PECL

PECL
20 VCC 19 Q0 18 Q0 17 GND 16 Q1 15 Q1 14 GND 13 Q2 12 Q2 11 VCC
Ordering Information 1

Part Number SY100EL90VZC SY100EL90VZCTR 2 SY100EL90VZI SY100EL90VZITR 2 SY100EL90VZG 3

SY100EL90VZGTR 2, 3

Package Type Z20-1 Z20-1 Z20-1 Z20-1 Z20-1

Z20-1

Operating Range

Commercial

Industrial Industiral

Industrial

Package Marking

Lead Finish

SY100EL90VZC

Sn-Pb

SY100EL90VZC

Sn-Pb

SY100EL90VZI

Sn-Pb

SY100EL90VZI

Sn-Pb

SY100EL90VZG with NiPdAu Pb-Free bar-line indicator Pb-Free

SY100EL90VZG with NiPdAu Pb-Free bar-line indicator Pb-Free

Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. Tape and Reel. Pb-Free package is recommended for new designs.
20-Pin Wide SOIC Z20-1

M9999-031306 or 408 955-1690

Micrel, Inc.

SY100EL90V

ECL/LVECL INPUT DC ELECTRICAL CHARACTERISTICS

ECL VEE = to LVECL VEE = to

Parameter

TA = 0°C

TA = +25°C

TA = +85°C

Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit

Input HIGH Voltage

Input LOW Voltage

Power Supply Current

Input HIGH Current
150 µA

Input LOW Current Dn µA

Output Reference

Minimum Peak-to-Peak 150 mV
More datasheets: DBM5W5S | VLQ69273B21G-518A | VLQ69273W21G-518A | DBMM9H4SN | LTL-58EFJ | CC109139408 | CC109120722 | 157-00287 | DEMM9SLNMBK52 | DAMY-15S-K126


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SY100EL90VZG Datasheet file may be downloaded here without warranties.

Datasheet ID: SY100EL90VZG 647924