SY100EL90VZC-TR
SY100EL90VZC-TR Datasheet
SY100EL90V
| Part | Datasheet |
|---|---|
SY100EL90VZC-TR |
SY100EL90VZC-TR (pdf) |
| Related Parts | Information |
|---|---|
|
SY100EL90VZG |
SY100EL90VZG |
|
SY100EL90VZG-TR |
SY100EL90VZG-TR |
|
SY100EL90VZC |
SY100EL90VZC |
|
SY100EL90VZI |
SY100EL90VZI |
|
SY100EL90VZI-TR |
SY100EL90VZI-TR |
| PDF Datasheet Preview |
|---|
| Micrel, Inc. 5V/3.3V TRIPLE ECL/LVECL-TOPECL/LVPECL TRANSLATOR SY100EL90V SY100EL90V s 3.3V and 5V power supply options s 500ps propagation delay s Fully differential design s Supports both standard and low voltage operation s Available in 20-pin SOIC package The SY100EL90V is a triple ECL/LVECL-to-PECL/ LVPECL translator. The device can translate over all combinations of supply voltages -5V ECL to 5V PECL, -5V ECL to 3.3V LVPECL, -3.3V LVECL to 5V PECL or -3.3V LVECL to 3.3V LVPECL. A VBB output is provided for interfacing with single ended ECL signals at the input. If a single ended input is to be used, the VBB output should be connected to the D input. The active signal would then drive the D input. When used, the VBB output should be bypassed to via a 0.01µF capacitor. The VBB output is designed to act as the switching reference for the EL90V under single ended input switching conditions. As a result this pin can only source/sink up to 0.5mA of current. To accomplish the level translation the EL90V requires three power rails. The VCC supply should be connected to the positive supply, and the VEE pin should be connected to the negative power supply. The GND pins as expected are connected to the system ground plane. Both VEE and VCC should be bypassed to ground via 0.01µF capacitors. Under open input conditions, the D input will be biased at VCC/2 and the D input will be pulled to VEE. This condition will force the Q output to a LOW, ensuring stability. FUNCTION TABLE Function ECL to 5V PECL ECL to 3.3V LVPECL LVECL to 5V PECL LVECL to 3.3V LVPECL VCC 5V 3.3V 5V 3.3V GND 0V PIN NAMES Pin Dn Qn VBB Function ECL/LVECL Inputs PECL/LVPECL Outputs ECL/LVECL Reference Voltage Output M9999-031306 or 408 955-1690 Amendment /0 Isse Date March 2006 Micrel, Inc. SY100EL90V PACKAGE/ORDERING INFORMATION VCC 1 D0 2 D0 3 VBB 4 D1 5 D1 6 VBB 7 D2 8 D2 9 VEE 10 PECL PECL PECL 20 VCC 19 Q0 18 Q0 17 GND 16 Q1 15 Q1 14 GND 13 Q2 12 Q2 11 VCC Ordering Information 1 Part Number SY100EL90VZC SY100EL90VZCTR 2 SY100EL90VZI SY100EL90VZITR 2 SY100EL90VZG 3 SY100EL90VZGTR 2, 3 Package Type Z20-1 Z20-1 Z20-1 Z20-1 Z20-1 Z20-1 Operating Range Commercial Industrial Industiral Industrial Package Marking Lead Finish SY100EL90VZC Sn-Pb SY100EL90VZC Sn-Pb SY100EL90VZI Sn-Pb SY100EL90VZI Sn-Pb SY100EL90VZG with NiPdAu Pb-Free bar-line indicator Pb-Free SY100EL90VZG with NiPdAu Pb-Free bar-line indicator Pb-Free Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. Tape and Reel. Pb-Free package is recommended for new designs. 20-Pin Wide SOIC Z20-1 M9999-031306 or 408 955-1690 Micrel, Inc. SY100EL90V ECL/LVECL INPUT DC ELECTRICAL CHARACTERISTICS ECL VEE = to LVECL VEE = to Parameter TA = 0°C TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Input HIGH Voltage Input LOW Voltage Power Supply Current Input HIGH Current 150 µA Input LOW Current Dn µA Output Reference Minimum Peak-to-Peak 150 mV |
| More datasheets: DBMM9H4SN | LTL-58EFJ | CC109139408 | CC109120722 | 157-00287 | DEMM9SLNMBK52 | DAMY-15S-K126 | SY100EL90VZG | SY100EL90VZG-TR | SY100EL90VZC |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SY100EL90VZC-TR Datasheet file may be downloaded here without warranties.