AT91SAM9M10B-CU

AT91SAM9M10B-CU Datasheet

AT91SAM9M10C-CU

Part	Datasheet
AT91SAM9M10B-CU	AT91SAM9M10B-CU (pdf)

Related Parts	Information
AT91SAM9M10C-CU-999	AT91SAM9M10C-CU-999
AT91SAM9M10C-CU	AT91SAM9M10C-CU

PDF Datasheet Preview
ARM-based Embedded MPU SAM9M10 The SAM9M10 is a multimedia enabled mid-range ARM926-based embedded MPU running at 400MHz, combining user interfaces, video playback and connectivity. It includes hardware video decoder, LCD Controller, resistive touchscreen, camera interface, audio, Ethernet 10/100 and high speed USB and SDIO. The hardware video decoder supports H.264, MPEG-4, MPEG-2, VC-1, H.263. The SAM9M10 also provides hardware image post-processing, such as image scaling, color conversion and image rotation. The SAM9M10 supports the latest generation of DDR2 and NAND Flash memory interfaces for program and data storage. An internal 133 MHz multi-layer bus architecture associated with 37 DMA channels, a dual external bus interface and distributed memory including a 64-KByte SRAM which can be configured as a tightly coupled memory TCM sustains the high bandwidth required by the processor and the high speed peripherals. The I/Os support 1.8V or 3.3V operation, which are independently configurable for the memory interface and peripheral I/Os. This feature completely eliminates the need for any external level shifters. In addition it supports ball pitch package for low cost PCB manufacturing. The SAM9M10 power management controller features efficient clock gating and a battery backup section minimizing power consumption in active and standby modes. The SAM9M10 device is particularly well suited for media-rich displays and control panels in home and commercial buildings, POS terminals, entertainment systems, internet appliances and medical. This is a summary document. The complete document is available on the Atmel website at • 400 MHz ARM926EJ-S Processor 32 KBytes Data Cache, 32 KBytes Instruction Cache, MMU • Memories DDR2 Controller 4-bank DDR2/LPDDR, SDRAM/LPSDR External Bus Interface supporting 4-bank DDR2/LPDDR, SDRAM/LPSDR, Static Memories, SLC NAND Flash with ECC One 64-KByte internal SRAM, single-cycle access at system speed or processor speed through TCM interface One 64-KByte internal ROM, embedding bootstrap routine • Peripherals Multi-format Video Decoder LCD Controller supporting STN and TFT displays up to 1280*860 ITU-R BT. 601/656 Image Sensor Interface USB Device High Speed, USB Host High Speed and USB Host Full Speed with On-Chip Transceiver 10/100 Mbps Ethernet MAC Controller Two High Speed Memory Card Hosts SDIO, SDCard, MMC AC'97 controller Two Master/Slave Serial Peripheral Interfaces Two Three-channel 16-bit Timer/Counters Two Synchronous Serial Controllers I2S mode Four-channel 16-bit PWM Controller Two-wire Interfaces Four USARTs with ISO7816, IrDA, Manchester and SPI modes, one DBGU 8-channel 10-bit ADC with 4-wire Touch Screen support • System 133 MHz twelve 32-bit layer AHB Bus Matrix 37 DMA Channels Boot from NAND Flash, SDCard, or serial DataFlash Reset Controller with on-chip Power-on Reset Selectable 32768 Hz Low-power and 12 MHz Crystal Oscillators Internal Low-power 32 kHz RC Oscillator One PLL for the system and one 480 MHz PLL optimized for USB High Speed Two Programmable External Clock Signals Advanced Interrupt Controller and Debug Unit Periodic Interval Timer, Watchdog Timer, Real Time Timer and Real Time Clock • I/O Five 32-bit Parallel Input/Output Controllers 160 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os with Schmitt trigger input • Package 324-ball TFBGA, pitch mm SAM9M10 [SUMMARY] SAM9M10 [SUMMARY] GDNDDANFA NTRST TTDDI TTCMKS RTCK TAGS L BMS HHBFHGSSDDPPAA,,HHFHSSDDMMAA TTRCMRMRD00DIC--S-CNK--RT-RCTR33RLCDRK TST PCK0-PCK1 FI IR DR D DT D PLLRCA IN UT IN32 UT32 SHDN KUP DDBU NRST DDC R System Controller TAG / Boundary Scan HS Transceiver HS Transceiver DBGU PLLA PLLUTMI PMC SC12M RC SC 32K SHDC 4 GPBR RTT P R RSTC PI A PI B PI C PI D PI In-Circuit mulator ARM926EJ-S ICache DCache 32K bytes MMU 32Kbytes ITCM DTCM Bus Interface SRAM 64KB PA PB HS HCI USB H ST All devices are marked with the Atmel logo and the ordering code. Additional marking may be in one of the following formats: YYWW V SAM9M10 [SUMMARY] 52 SAM9M10 Ordering Information Table SAM9M10 Ordering Information Ordering Code AT91SAM9M10C-CU AT91SAM9M10B-CU AT91SAM9M10-CU Package TFBGA324 Package Type Green Temperature Operating Range Industrial 40°C to 85°C Industrial 40°C to 85°C Industrial 40°C to 85°C SAM9M10 [SUMMARY] 53 In the tables that follow, the most recent version appears first. The initials “rfo” indicate changes requested by product experts, or made during proof reading as part of the approval process. Table Comments Product Overview Section “Features”, under “Peripherals” , added DBGU to USART... AT91 removed from SAM9M10 product name in headers, text and images. Ordering Codes Table 12-1, “AT91SAM9M10 Ordering Information”, added AT91SAM9M10C-CU and MRL C Section “Marking” added at the end of Section “Mechanical Characteristics”. Section “SAM9M10 Ordering Information”, a second ordering code added AT91SAM9M10B-CU. An MRL column added too. LFBGA changed to TFBGA in Section “Package and Pinout”. Product Line/Product naming convention changed - AT91SAM ARM-based MPU / SAM9M10 Section “Power Supplies”, replaced ground pin names by GNDIOM, GNDCORE, GNDANA, GNDIOP, GNDBU, GNDOSC, GNDUTMI. Reorganized text describing GND association to power supply pins Section “Video Decoder VDEC ” added. Section “True Random Number Generator TRNG ” added. ‘11-layer --> ‘12-layer’ in Section “Bus Matrix” New Figure 11-1 “324-ball TFBGA Package Drawing” Section “External Memories” reorganized. First issue Change Request Ref. 8551 7979 7883 rfo 7332 rfo 7172 7171 6954 RFO SAM9M10 [SUMMARY] 54 Atmel Corporation 1600 Technology Drive San Jose, CA 95110 USA Tel +1 408 441-0311 Fax +1 408 487-2600 Atmel Asia Limited Unit 01-5 & 16, 19F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon HONG KONG Tel +852 2245-6100 Fax +852 2722-1369 Atmel Munich GmbH Business Campus Parkring 4 D-85748 Garching b. Munich GERMANY Tel +49 89-31970-0 Fax +49 89-3194621 Atmel Japan G.K. 16F Shin-Osaki Kangyo Bldg 1-6-4 Osaki, Shinagawa-ku Tokyo 141-0032 JAPAN Tel +81 3 6417-0300 Fax +81 3 6417-0370 Atmel logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. the logo, and others are the registered trademarks or trademarks of ARM Ltd. and others are registered trademarks or trademarks of Microsoft Corporation in the US and/or other countries. Other terms and product names may be the trademarks of others. Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

PDF Datasheet Preview

ARM-based Embedded MPU

SAM9M10

The SAM9M10 is a multimedia enabled mid-range ARM926-based embedded MPU running at 400MHz, combining user interfaces, video playback and connectivity. It includes hardware video decoder, LCD Controller, resistive touchscreen, camera interface, audio, Ethernet 10/100 and high speed USB and SDIO. The hardware video decoder supports H.264, MPEG-4, MPEG-2, VC-1, H.263. The SAM9M10 also provides hardware image post-processing, such as image scaling, color conversion and image rotation. The SAM9M10 supports the latest generation of DDR2 and NAND Flash memory interfaces for program and data storage. An internal 133 MHz multi-layer bus architecture associated with 37 DMA channels, a dual external bus interface and distributed memory including a 64-KByte SRAM which can be configured as a tightly coupled memory TCM sustains the high bandwidth required by the processor and the high speed peripherals. The I/Os support 1.8V or 3.3V operation, which are independently configurable for the memory interface and peripheral I/Os. This feature completely eliminates the need for any external level shifters. In addition it supports ball pitch package for low cost PCB manufacturing. The SAM9M10 power management controller features efficient clock gating and a battery backup section minimizing power consumption in active and standby modes. The SAM9M10 device is particularly well suited for media-rich displays and control panels in home and commercial buildings, POS terminals, entertainment systems, internet appliances and medical.

This is a summary document. The complete document is available on the Atmel website at
• 400 MHz ARM926EJ-S Processor 32 KBytes Data Cache, 32 KBytes Instruction Cache, MMU
• Memories DDR2 Controller 4-bank DDR2/LPDDR, SDRAM/LPSDR External Bus Interface supporting 4-bank DDR2/LPDDR, SDRAM/LPSDR, Static Memories, SLC NAND Flash with ECC One 64-KByte internal SRAM, single-cycle access at system speed or processor speed through TCM interface One 64-KByte internal ROM, embedding bootstrap routine
• Peripherals Multi-format Video Decoder LCD Controller supporting STN and TFT displays up to 1280*860 ITU-R BT. 601/656 Image Sensor Interface USB Device High Speed, USB Host High Speed and USB Host Full Speed with On-Chip Transceiver 10/100 Mbps Ethernet MAC Controller Two High Speed Memory Card Hosts SDIO, SDCard, MMC AC'97 controller Two Master/Slave Serial Peripheral Interfaces Two Three-channel 16-bit Timer/Counters Two Synchronous Serial Controllers I2S mode Four-channel 16-bit PWM Controller Two-wire Interfaces Four USARTs with ISO7816, IrDA, Manchester and SPI modes, one DBGU 8-channel 10-bit ADC with 4-wire Touch Screen support
• System 133 MHz twelve 32-bit layer AHB Bus Matrix 37 DMA Channels Boot from NAND Flash, SDCard, or serial DataFlash Reset Controller with on-chip Power-on Reset Selectable 32768 Hz Low-power and 12 MHz Crystal Oscillators Internal Low-power 32 kHz RC Oscillator One PLL for the system and one 480 MHz PLL optimized for USB High Speed Two Programmable External Clock Signals Advanced Interrupt Controller and Debug Unit Periodic Interval Timer, Watchdog Timer, Real Time Timer and Real Time Clock
• I/O Five 32-bit Parallel Input/Output Controllers 160 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os with Schmitt trigger input
• Package 324-ball TFBGA, pitch mm

SAM9M10 [SUMMARY]

SAM9M10 [SUMMARY]

GDNDDANFA

NTRST TTDDI TTCMKS RTCK

TAGS L BMS HHBFHGSSDDPPAA,,HHFHSSDDMMAA TTRCMRMRD00DIC--S-CNK--RT-RCTR33RLCDRK

TST PCK0-PCK1

FI IR DR D DT D

PLLRCA

IN UT

IN32 UT32 SHDN KUP DDBU NRST DDC R

System Controller

TAG / Boundary Scan

HS Transceiver

HS Transceiver

DBGU

PLLA PLLUTMI PMC

SC12M

RC SC 32K SHDC
4 GPBR RTT

P R RSTC

PI A PI B PI C

PI D PI

In-Circuit mulator

ARM926EJ-S

ICache

DCache
32K bytes MMU 32Kbytes

ITCM DTCM Bus Interface

SRAM 64KB

PA PB

HS HCI USB H ST
All devices are marked with the Atmel logo and the ordering code. Additional marking may be in one of the following formats:

YYWW V

SAM9M10 [SUMMARY] 52
SAM9M10 Ordering Information
Table SAM9M10 Ordering Information
Ordering Code

AT91SAM9M10C-CU

AT91SAM9M10B-CU

AT91SAM9M10-CU

Package TFBGA324

Package Type Green

Temperature Operating Range Industrial 40°C to 85°C Industrial 40°C to 85°C Industrial 40°C to 85°C

SAM9M10 [SUMMARY] 53

In the tables that follow, the most recent version appears first. The initials “rfo” indicate changes requested by product experts, or made during proof reading as part of the approval process.

Table
Comments Product Overview Section “Features”, under “Peripherals” , added DBGU to USART... AT91 removed from SAM9M10 product name in headers, text and images. Ordering Codes Table 12-1, “AT91SAM9M10 Ordering Information”, added AT91SAM9M10C-CU and MRL C Section “Marking” added at the end of Section “Mechanical Characteristics”. Section “SAM9M10 Ordering Information”, a second ordering code added AT91SAM9M10B-CU. An MRL column added too. LFBGA changed to TFBGA in Section “Package and Pinout”.

Product Line/Product naming convention changed - AT91SAM ARM-based MPU / SAM9M10 Section “Power Supplies”, replaced ground pin names by GNDIOM, GNDCORE, GNDANA, GNDIOP, GNDBU, GNDOSC, GNDUTMI. Reorganized text describing GND association to power supply pins

Section “Video Decoder VDEC ” added. Section “True Random Number Generator TRNG ” added. ‘11-layer --> ‘12-layer’ in Section “Bus Matrix” New Figure 11-1 “324-ball TFBGA Package Drawing” Section “External Memories” reorganized. First issue

Change Request Ref.
8551
7979
7883 rfo 7332
rfo 7172 7171 6954 RFO

SAM9M10 [SUMMARY] 54

Atmel Corporation 1600 Technology Drive San Jose, CA 95110 USA Tel +1 408 441-0311 Fax +1 408 487-2600

Atmel Asia Limited Unit 01-5 & 16, 19F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon HONG KONG Tel +852 2245-6100 Fax +852 2722-1369

Atmel Munich GmbH Business Campus Parkring 4 D-85748 Garching b. Munich GERMANY Tel +49 89-31970-0 Fax +49 89-3194621

Atmel Japan G.K. 16F Shin-Osaki Kangyo Bldg 1-6-4 Osaki, Shinagawa-ku Tokyo 141-0032 JAPAN Tel +81 3 6417-0300 Fax +81 3 6417-0370

Atmel logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. the logo, and others are the registered trademarks or trademarks of ARM Ltd. and others are registered trademarks or trademarks of Microsoft Corporation in the US and/or other countries. Other terms and product names may be the trademarks of others.

Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT91SAM9M10B-CU Datasheet file may be downloaded here without warranties.

Datasheet ID: AT91SAM9M10B-CU 519375