E5130A-DIT

E5130A-DIT Datasheet


e5130

Part Datasheet
E5130A-DIT E5130A-DIT E5130A-DIT (pdf)
PDF Datasheet Preview
Low Voltage CMOS Driver Circuit
e5130

The e5130 contains 4 independent driver outputs with an ON resistance of typ. 25 W 15 W tor the P-channel output transistors and typ. 20 W 13 W for the N-channel output transistors at a supply voltage of V 3 V . To obtain a fast transition of the outputs, even for slow rise/-fall time input signals, all digital inputs IN1 IN4 have a schmitt-trigger characteristic with a hysteresis of
typ. 50 mV. If a higher driving capability is needed, all inputs and outputs may be connected in parallel. In this case the rise/-fall time of the input signals IN1 IN4 must be less than 200 nsec. Due to the fast switching characteristic of the tristatable output drivers, the circuit is also suited as low voltage bus driver.

D V operating voltage range D 4 non-inverting, tristatable drivers for the
following applications:

Motor driver for bipolar stepper motors in watch/clock applications

Driver for piezoelectric transducers buzzer LED Driver

Line driver for medium speed applications

Advantages

D High load current at low supply voltage D Replaces several discrete transistors D Tri-state operation possible D Possible applications Motor driver Radio controlled clock/watch Line driver for mini-computer, laptop LED driver Relay driver

Pad Configuration

OUT1 OUT2 OUT3 OUT4
e5130

Name VDD VSS IN1 IN4 TRI OUT1 OUT4

Description Positive supply voltage Negative supply voltage Digital inputs Tristate input Drive outputs

Chipsize x = mm, y = mm,

Padwindow 90 x 90 m
94 8178

IN1 IN2 IN3 IN4 VSS
Ordering Information

Extended Type Number

Package

Die in Trays

Remarks
e5130

Absolute Maximum Ratings

Parameters

Value

Unit

Supply voltage Input voltage range, all inputs Operating ambient temperature range

VDD VSS
to + 5

VSS to VDD +
20 to + 70

Storage temperature range
40 to + 125

Lead temperature during soldering at 2 mm distance, 10 s

Operating Characteristics

VSS = 0 V, VDD = + V, Tamb = + 25 °C, unless otherwise specified. All voltage levels are measured with reference to VSS.

Parameters

Test Conditions / Pin

Symbol Min Typ Max Unit

Operating voltage

Operating temperature

Tamb 10

Operating current standby VDD = V, RL12 = RL34 = R,

IN1 to IN4 at VDD or VSS, TRI at

Drive output OUT1 to OUT4

Output current Output current

VDD = V, RL12 = RL34 = 200 W IOUT " "

VDD = V, RL12 = RL34 = 200 W IOUT " "

Output current

VDD = V, RL12 = RL34 = 200 W IOUT " 12 " 13

Delay time

VDD = 3 V, CL = 50 pF

TDr, TDf

Delay time

VDD = V, CL = 50 pF, see figure 2, note 1

TDr, TDf
80 150 ns
More datasheets: 4310-010LF | CY2XF24FLXCT | CY2XF24FLXIT | CY2XF24LXI625T | 23-215A/T1D-CR1S1E/5A | FQP11N50CF | CDC22-24 | SEN0175 | 3200 | 1758


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived E5130A-DIT Datasheet file may be downloaded here without warranties.

Datasheet ID: E5130A-DIT 519343