AT17LV512-10JI

AT17LV512-10JI Datasheet


The AT17LV series FPGA Configuration EEPROMs Configurators provide an easyto-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT17LV series device is packaged in the 8-lead LAP, 8-lead PDIP, 8-lead SOIC, 20lead PLCC, 20-lead SOIC and 44-lead TQFP, see Table The AT17LV series Configurators uses a simple serial-access procedure to configure one or more FPGA devices. The user can select the polarity of the reset function by programming four EEPROM bytes. These devices also support a write-protection mechanism within its programming mode.

Part Datasheet
AT17LV512-10JI AT17LV512-10JI AT17LV512-10JI (pdf)
Related Parts Information
AT17LV512-10JU AT17LV512-10JU AT17LV512-10JU
AT17LV256-10PC AT17LV256-10PC AT17LV256-10PC
AT17LV002-10JC AT17LV002-10JC AT17LV002-10JC
AT17LV65-10PI AT17LV65-10PI AT17LV65-10PI
AT17LV65-10JI AT17LV65-10JI AT17LV65-10JI
AT17LV256-10SI AT17LV256-10SI AT17LV256-10SI
AT17LV256-10SC AT17LV256-10SC AT17LV256-10SC
AT17LV256-10PI AT17LV256-10PI AT17LV256-10PI
AT17LV256-10JI AT17LV256-10JI AT17LV256-10JI
AT17LV128-10SI AT17LV128-10SI AT17LV128-10SI
AT17LV002-10JI AT17LV002-10JI AT17LV002-10JI
AT17LV128-10SC AT17LV128-10SC AT17LV128-10SC
AT17LV128-10PI AT17LV128-10PI AT17LV128-10PI
AT17LV128-10JI AT17LV128-10JI AT17LV128-10JI
AT17LV010-10JC AT17LV010-10JC AT17LV010-10JC
AT17LV512-10PI AT17LV512-10PI AT17LV512-10PI
AT17LV128-10PC AT17LV128-10PC AT17LV128-10PC
AT17LV010-10PC AT17LV010-10PC AT17LV010-10PC
AT17LV512-10PC AT17LV512-10PC AT17LV512-10PC
AT17LV010-10JI AT17LV010-10JI AT17LV010-10JI
AT17LV65-10NI AT17LV65-10NI AT17LV65-10NI
AT17LV65-10NC AT17LV65-10NC AT17LV65-10NC
AT17LV256-10NI AT17LV256-10NI AT17LV256-10NI
AT17LV256-10NC AT17LV256-10NC AT17LV256-10NC
AT17LV128-10NI AT17LV128-10NI AT17LV128-10NI
AT17LV128-10NC AT17LV128-10NC AT17LV128-10NC
AT17LV65-10PC AT17LV65-10PC AT17LV65-10PC
AT17LV65-10JC AT17LV65-10JC AT17LV65-10JC
AT17LV512-10JC AT17LV512-10JC AT17LV512-10JC
AT17LV128-10JC AT17LV128-10JC AT17LV128-10JC
AT17LV010-10PI AT17LV010-10PI AT17LV010-10PI
AT17LV256-10JC AT17LV256-10JC AT17LV256-10JC
AT17LV512-10SI AT17LV512-10SI AT17LV512-10SI
AT17LV512-10SC AT17LV512-10SC AT17LV512-10SC
AT17LV65-10SI AT17LV65-10SI AT17LV65-10SI
PDF Datasheet Preview
• EE Programmable 65,536 x 1-, 131,072 x 1-, 262,144 x 1-, 524,288 x 1-, 1,048,576 x 1-, 2,097,152 x 1-, and 4,194,304 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays FPGAs
• Supports both 3.3V and 5.0V Operating Voltage Applications
• In-System Programmable ISP via Two-Wire Bus
• Simple Interface to SRAM FPGAs
• Compatible with Atmel AT6000, AT40K and AT94K Devices, APEX

Devices, XC3000, XC4000, XC5200, FPGAs
• Cascadable Read-back to Support Additional Configurations or Higher-density Arrays
• Very Low-power CMOS EEPROM Process
• Programmable Reset Polarity
• Available in 6 mm x 6 mm x 1 mm 8-lead LAP Pin-compatible with 8-lead SOIC/VOIC

Packages , 8-lead PDIP, 8-lead SOIC, 20-lead PLCC, 20-lead SOIC and 44-lead TQFP Packages
• Emulation of Atmel’s AT24CXXX Serial EEPROMs
• Low-power Standby Mode
• High-reliability

Endurance 100,000 Write Cycles Data Retention 90 Years for Industrial Parts at 85° C and 190 Years for

Commercial Parts at 70° C
• Green Pb/Halide-free/RoHS Compliant Package Options Available

The AT17LV series FPGA Configuration EEPROMs Configurators provide an easyto-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT17LV series device is packaged in the 8-lead LAP, 8-lead PDIP, 8-lead SOIC, 20lead PLCC, 20-lead SOIC and 44-lead TQFP, see Table The AT17LV series Configurators uses a simple serial-access procedure to configure one or more FPGA devices. The user can select the polarity of the reset function by programming four EEPROM bytes. These devices also support a write-protection mechanism within its programming mode.

The AT17LV series configurators can be programmed with industry-standard programmers, Atmel’s ATDH2200E Programming Kit or Atmel’s ATDH2225 ISP Cable.

FPGA Configuration EEPROM Memory

AT17LV65 AT17LV128 AT17LV256 AT17LV512 AT17LV010 AT17LV002 AT17LV040
3.3V and 5V System Support

Table AT17LV Series Packages

Package 8-lead LAP

AT17LV65/ AT17LV128/ AT17LV256

AT17LV512/ AT17LV010

AT17LV002 Yes

AT17LV040
8-lead PDIP
8-lead SOIC

Use 8-lead LAP 1

Use 8-lead LAP 1
20-lead PLCC
20-lead SOIC

Yes 2

Yes 2

Yes 2
44-lead TQFP

The 8-lead LAP package has the same footprint as the 8-lead SOIC. Since an 8-lead SOIC package is not available for the AT17LV512/010/002 devices, it is possible to use an 8-lead LAP package instead.

The pinout for the AT17LV65/128/256 devices is not pin-for-pin compatible with the AT17LV512/010/002 devices.

Refer to the AT17Fxxx datasheet, available on the Atmel web site.

Pin Configuration

Figure 8-lead LAP

DATA 1 CLK 2

WP 1 RESET/OE 3 CE 4
8 VCC 7 SER_EN 6 CEO A2 5 GND

Figure 8-lead SOIC

DATA 1 CLK 2

WP 1 RESET/OE 3 CE 4
8 VCC 7 SER_EN 6 CEO A2 5 GND

Figure 8-lead PDIP

DATA 1 CLK 2
Figure Ordering Code

AT17LV65A-10PC

Vo ltage 3.0V to 5.5V

Size Bits 65 = 65K 128 = 128K 256 = 256K 512 = 512K 010 = 1M 002 = 2M 040 = 4M

Special Pinouts

A = Altera

Blank = Xilinx /Atmel/ Other

Package Temperature C = 8CN4 C = Commercial P = 8P3 I = Industrial N = 8S1 U = Fully Green J = 20J S = 20S2 TQ = 44A BJ = 44J
8CN4 8P3 8S1 20J 20S2 44A

Package Type 8-lead, 6 mm x 6 mm x 1 mm, Leadless Array Package LAP Pin-compatible with 8-lead SOIC/VOID Packages 8-lead, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 20-lead, Plastic J-leaded Chip Carrier PLCC 20-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 44-lead, Thin mm Plastic Quad Flat Package Carrier TQFP
16 AT17LV65/128/256/512/010/002/040

AT17LV65/128/256/512/010/002/040
Ordering Information

Standard Package Options

Memory Size
Ordering Code

Package 2 3

Operation Range
64-Kbit 1 128-Kbit 1

AT17LV65-10PC AT17LV65-10NC AT17LV65-10JC AT17LV65-10PI AT17LV65-10NI AT17LV65-10JI AT17LV128-10PC AT17LV128-10NC AT17LV128-10JC AT17LV128-10SC AT17LV128-10PI AT17LV128-10NI AT17LV128-10JI
8P3 8S1 20J 8P3 8S1 20J 8P3 8S1 20J 20S2 8P3 8S1 20J

Commercial 0° C to 70° C

Industrial -40° C to 85° C

Commercial 0° C to 70° C

Industrial -40° C to 85° C

AT17LV128-10SI AT17LV256-10PC
20S2 8P3
256-Kbit 1

AT17LV256-10NC AT17LV256-10JC AT17LV256-10SC AT17LV256-10PI AT17LV256-10NI AT17LV256-10JI
8S1 20J 20S2 8P3 8S1 20J

Commercial 0° C to 70° C

Industrial -40° C to 85° C
512-Kbit 1

AT17LV256-10SI AT17LV512-10PC AT17LV512-10JC AT17LV512-10PI AT17LV512-10JI
20S2 8P3 20J 8P3 20J

Commercial 0° C to 70° C

Industrial -40° C to 85° C
1-Mbit 1 2-Mbit 1

AT17LV010-10PC AT17LV010-10JC AT17LV010-10PI AT17LV010-10JI AT17LV002-10JC

AT17LV002-10JI

Commercial
0° C to 70° C

Industrial
-40° C to 85° C

Commercial 20J
0° C to 70° C

Industrial
-40° C to 85° C

For operating 5V operating voltage, please refer to the corresponding AC and DC Characteristics. For the -10SC and -10SI packages, customers may migrate to the AT17LVXXX-10SU. For the -10TQC and -10TQI packages, customers may migrate to the AT17LVXXX-10TQU.

Green Package Options Pb/Halide-free/RoHS Compliant

Memory Size
Ordering Code

Package

AT17LV256-10CU
8CN4

Operation Range

AT17LV256-10JU
256-Kbit 1

AT17LV256-10NU

AT17LV256-10PU

AT17LV256-10SU
20S2
512-Kbit 1-Mbit 1

AT17LV512-10CU AT17LV512-10JU AT17LV010-10CU AT17LV010-10JU
8CN4 20J 8CN4 20J

Industrial -40° C to 85° C

AT17LV010-10PU

AT17LV002-10CU
8CN4
2-Mbit 1

AT17LV002-10JU AT17LV002-10SU
20J 20S2

AT17LV002-10TQU
4-Mbit 1

AT17LV040-10TQU

Note For operating 5V operating voltage, please refer to the corresponding AC and DC Characteristics.
18 AT17LV65/128/256/512/010/002/040

Packaging Information
8CN4 LAP

AT17LV65/128/256/512/010/002/040

Marked Pin1 Indentifier

Top View

Side View
mm TYP 8

Bottom View

Pin1 Corner

SYMBOL A A1 b D E e1 L L1

COMMON DIMENSIONS Unit of Measure = mm

NOM BSC REF

NOTE 1

Note:

Metal Pad Dimensions. All exposed metal area shall have the following finished platings.
Removed -10SC, 10SI, -10TQC, -10TQI, -10BJC and -10BJI devices from ordering information.

Headquarters

Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel 1 408 441-0311 Fax 1 408 487-2600

International

Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel 852 2721-9778 Fax 852 2722-1369

Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-enYvelines Cedex France Tel 33 1-30-60-70-00 Fax 33 1-30-60-71-11

Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581

Product Contact

Web Site

Literature Requests

Technical Support

Sales Contact

Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
2008 Atmel Corporation. All rights reserved. logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
More datasheets: XA-A14-CS1R | 520-01-08R01 | 5114 | FJNS3210RBU | FJNS3210RTA | AT17LV512-10JU | AT17LV256-10PC | AT17LV002-10JC | AT17LV65-10PI | AT17LV65-10JI


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT17LV512-10JI Datasheet file may be downloaded here without warranties.

Datasheet ID: AT17LV512-10JI 518866