The AT17LV series FPGA Configuration EEPROMs Configurators provide an easyto-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT17LV series device is packaged in the 8-lead LAP, 8-lead PDIP, 8-lead SOIC, 20lead PLCC, 20-lead SOIC and 44-lead TQFP, see Table The AT17LV series Configurators uses a simple serial-access procedure to configure one or more FPGA devices. The user can select the polarity of the reset function by programming four EEPROM bytes. These devices also support a write-protection mechanism within its programming mode.
Part | Datasheet |
---|---|
![]() |
AT17LV128-10JI (pdf) |
Related Parts | Information |
---|---|
![]() |
AT17LV512-10JU |
![]() |
AT17LV256-10PC |
![]() |
AT17LV002-10JC |
![]() |
AT17LV65-10PI |
![]() |
AT17LV65-10JI |
![]() |
AT17LV512-10JI |
![]() |
AT17LV256-10SI |
![]() |
AT17LV256-10SC |
![]() |
AT17LV256-10PI |
![]() |
AT17LV256-10JI |
![]() |
AT17LV128-10SI |
![]() |
AT17LV002-10JI |
![]() |
AT17LV128-10SC |
![]() |
AT17LV128-10PI |
![]() |
AT17LV010-10JC |
![]() |
AT17LV512-10PI |
![]() |
AT17LV128-10PC |
![]() |
AT17LV010-10PC |
![]() |
AT17LV512-10PC |
![]() |
AT17LV010-10JI |
![]() |
AT17LV65-10NI |
![]() |
AT17LV65-10NC |
![]() |
AT17LV256-10NI |
![]() |
AT17LV256-10NC |
![]() |
AT17LV128-10NI |
![]() |
AT17LV128-10NC |
![]() |
AT17LV65-10PC |
![]() |
AT17LV65-10JC |
![]() |
AT17LV512-10JC |
![]() |
AT17LV128-10JC |
![]() |
AT17LV010-10PI |
![]() |
AT17LV256-10JC |
![]() |
AT17LV512-10SI |
![]() |
AT17LV512-10SC |
![]() |
AT17LV65-10SI |
PDF Datasheet Preview |
---|
• EE Programmable 65,536 x 1-, 131,072 x 1-, 262,144 x 1-, 524,288 x 1-, 1,048,576 x 1-, 2,097,152 x 1-, and 4,194,304 x 1-bit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays FPGAs • Supports both 3.3V and 5.0V Operating Voltage Applications • In-System Programmable ISP via Two-Wire Bus • Simple Interface to SRAM FPGAs • Compatible with Atmel AT6000, AT40K and AT94K Devices, APEX Devices, XC3000, XC4000, XC5200, FPGAs • Cascadable Read-back to Support Additional Configurations or Higher-density Arrays • Very Low-power CMOS EEPROM Process • Programmable Reset Polarity • Available in 6 mm x 6 mm x 1 mm 8-lead LAP Pin-compatible with 8-lead SOIC/VOIC Packages , 8-lead PDIP, 8-lead SOIC, 20-lead PLCC, 20-lead SOIC and 44-lead TQFP Packages • Emulation of Atmel’s AT24CXXX Serial EEPROMs • Low-power Standby Mode • High-reliability Endurance 100,000 Write Cycles Data Retention 90 Years for Industrial Parts at 85° C and 190 Years for Commercial Parts at 70° C • Green Pb/Halide-free/RoHS Compliant Package Options Available The AT17LV series FPGA Configuration EEPROMs Configurators provide an easyto-use, cost-effective configuration memory for Field Programmable Gate Arrays. The AT17LV series device is packaged in the 8-lead LAP, 8-lead PDIP, 8-lead SOIC, 20lead PLCC, 20-lead SOIC and 44-lead TQFP, see Table The AT17LV series Configurators uses a simple serial-access procedure to configure one or more FPGA devices. The user can select the polarity of the reset function by programming four EEPROM bytes. These devices also support a write-protection mechanism within its programming mode. The AT17LV series configurators can be programmed with industry-standard programmers, Atmel’s ATDH2200E Programming Kit or Atmel’s ATDH2225 ISP Cable. FPGA Configuration EEPROM Memory AT17LV65 AT17LV128 AT17LV256 AT17LV512 AT17LV010 AT17LV002 AT17LV040 3.3V and 5V System Support Table AT17LV Series Packages Package 8-lead LAP AT17LV65/ AT17LV128/ AT17LV256 AT17LV512/ AT17LV010 AT17LV002 Yes AT17LV040 8-lead PDIP 8-lead SOIC Use 8-lead LAP 1 Use 8-lead LAP 1 20-lead PLCC 20-lead SOIC Yes 2 Yes 2 Yes 2 44-lead TQFP The 8-lead LAP package has the same footprint as the 8-lead SOIC. Since an 8-lead SOIC package is not available for the AT17LV512/010/002 devices, it is possible to use an 8-lead LAP package instead. The pinout for the AT17LV65/128/256 devices is not pin-for-pin compatible with the AT17LV512/010/002 devices. Refer to the AT17Fxxx datasheet, available on the Atmel web site. Pin Configuration Figure 8-lead LAP DATA 1 CLK 2 WP 1 RESET/OE 3 CE 4 8 VCC 7 SER_EN 6 CEO A2 5 GND Figure 8-lead SOIC DATA 1 CLK 2 WP 1 RESET/OE 3 CE 4 8 VCC 7 SER_EN 6 CEO A2 5 GND Figure 8-lead PDIP DATA 1 CLK 2 Figure Ordering Code AT17LV65A-10PC Vo ltage 3.0V to 5.5V Size Bits 65 = 65K 128 = 128K 256 = 256K 512 = 512K 010 = 1M 002 = 2M 040 = 4M Special Pinouts A = Altera Blank = Xilinx /Atmel/ Other Package Temperature C = 8CN4 C = Commercial P = 8P3 I = Industrial N = 8S1 U = Fully Green J = 20J S = 20S2 TQ = 44A BJ = 44J 8CN4 8P3 8S1 20J 20S2 44A Package Type 8-lead, 6 mm x 6 mm x 1 mm, Leadless Array Package LAP Pin-compatible with 8-lead SOIC/VOID Packages 8-lead, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 20-lead, Plastic J-leaded Chip Carrier PLCC 20-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 44-lead, Thin mm Plastic Quad Flat Package Carrier TQFP 16 AT17LV65/128/256/512/010/002/040 AT17LV65/128/256/512/010/002/040 Ordering Information Standard Package Options Memory Size Ordering Code Package 2 3 Operation Range 64-Kbit 1 128-Kbit 1 AT17LV65-10PC AT17LV65-10NC AT17LV65-10JC AT17LV65-10PI AT17LV65-10NI AT17LV65-10JI AT17LV128-10PC AT17LV128-10NC AT17LV128-10JC AT17LV128-10SC AT17LV128-10PI AT17LV128-10NI AT17LV128-10JI 8P3 8S1 20J 8P3 8S1 20J 8P3 8S1 20J 20S2 8P3 8S1 20J Commercial 0° C to 70° C Industrial -40° C to 85° C Commercial 0° C to 70° C Industrial -40° C to 85° C AT17LV128-10SI AT17LV256-10PC 20S2 8P3 256-Kbit 1 AT17LV256-10NC AT17LV256-10JC AT17LV256-10SC AT17LV256-10PI AT17LV256-10NI AT17LV256-10JI 8S1 20J 20S2 8P3 8S1 20J Commercial 0° C to 70° C Industrial -40° C to 85° C 512-Kbit 1 AT17LV256-10SI AT17LV512-10PC AT17LV512-10JC AT17LV512-10PI AT17LV512-10JI 20S2 8P3 20J 8P3 20J Commercial 0° C to 70° C Industrial -40° C to 85° C 1-Mbit 1 2-Mbit 1 AT17LV010-10PC AT17LV010-10JC AT17LV010-10PI AT17LV010-10JI AT17LV002-10JC AT17LV002-10JI Commercial 0° C to 70° C Industrial -40° C to 85° C Commercial 20J 0° C to 70° C Industrial -40° C to 85° C For operating 5V operating voltage, please refer to the corresponding AC and DC Characteristics. For the -10SC and -10SI packages, customers may migrate to the AT17LVXXX-10SU. For the -10TQC and -10TQI packages, customers may migrate to the AT17LVXXX-10TQU. Green Package Options Pb/Halide-free/RoHS Compliant Memory Size Ordering Code Package AT17LV256-10CU 8CN4 Operation Range AT17LV256-10JU 256-Kbit 1 AT17LV256-10NU AT17LV256-10PU AT17LV256-10SU 20S2 512-Kbit 1-Mbit 1 AT17LV512-10CU AT17LV512-10JU AT17LV010-10CU AT17LV010-10JU 8CN4 20J 8CN4 20J Industrial -40° C to 85° C AT17LV010-10PU AT17LV002-10CU 8CN4 2-Mbit 1 AT17LV002-10JU AT17LV002-10SU 20J 20S2 AT17LV002-10TQU 4-Mbit 1 AT17LV040-10TQU Note For operating 5V operating voltage, please refer to the corresponding AC and DC Characteristics. 18 AT17LV65/128/256/512/010/002/040 Packaging Information 8CN4 LAP AT17LV65/128/256/512/010/002/040 Marked Pin1 Indentifier Top View Side View mm TYP 8 Bottom View Pin1 Corner SYMBOL A A1 b D E e1 L L1 COMMON DIMENSIONS Unit of Measure = mm NOM BSC REF NOTE 1 Note: Metal Pad Dimensions. All exposed metal area shall have the following finished platings. Removed -10SC, 10SI, -10TQC, -10TQI, -10BJC and -10BJI devices from ordering information. Headquarters Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel 1 408 441-0311 Fax 1 408 487-2600 International Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel 852 2721-9778 Fax 852 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-enYvelines Cedex France Tel 33 1-30-60-70-00 Fax 33 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581 Product Contact Web Site Literature Requests Technical Support Sales Contact Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. 2008 Atmel Corporation. All rights reserved. logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. |
More datasheets: AT17LV65-10JI | AT17LV512-10JI | AT17LV256-10SI | AT17LV256-10SC | AT17LV256-10PI | AT17LV256-10JI | AT17LV128-10SI | AT17LV002-10JI | AT17LV128-10SC | AT17LV128-10PI |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT17LV128-10JI Datasheet file may be downloaded here without warranties.