MXL1013DS8+T

MXL1013DS8+T Datasheet

MXL1013/MXL1014

Part	Datasheet
MXL1013DS8+T	MXL1013DS8+T (pdf)

PDF Datasheet Preview
Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains available for existing users. A Maxim replacement or an industry second-source may be available. Please see the QuickView data sheet for this part or contact technical support for assistance. For further information, contact Maxim’s Applications Tech Support. Dual/Quad Precision Op Amps MXL1013/MXL1014 The Maxim MXL1013 is a precision dual op amp that upgrades the performance of popular devices such as the MC1458/MC1558, LM158 and OP221. The Maxim MXL1014 is a precision quad op amp that directly upgrades designs in the industry-standard 14-pin DIP configuration and has specifications similar to the LT1013. The MXL1013 and MXL1014 are pin compatible with industry standards such as the LT1013 and LT1014. Precision specifications include 40µV offset voltage, 0.3µV/°C drift TCVOS , 117dB CMRR, and 120dB PSRR. While supply current is typically only 350µA per amplifier, the outputs can source and sink more than 20mA. Both the MXL1013 and the MXL1014 can be operated from a single +5V power supply. The input voltage range includes ground and the outputs swing to within a few millivolts of ground. Battery-Powered Precision Instrumentation Strain-Gauge Signal Conditioners Thermocouple Amplifiers Instrumentation Amplifiers 4mA to 20mA Current-Loop Transmitters Multiple-Limit Threshold Detection Active Filters Multiple Gain Blocks o Single-Supply Operation Input Voltage Range Extends to Ground Output Swings to Ground while Sinking Current o 150µV Max Offset Voltage o Low Drift 2µV/°C Max o 0.8nA Max Offset Current o Guaranteed High Gain 5mA Load Current Million Min 17mA Load Current Million Min o 500µA Max Supply Current per Amplifier o Low Voltage Noise 0.1Hz to 10Hz, 0.55µVp-p o Lower Current Noise than OP07: Ordering Information PART MXL1013CN8 MXL1013DN8 MXL1013DS8 MXL1013DC/D MXL1013IN8 MXL1013IS8 MXL1013AMJ8 MXL1013MJ8 TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -55°C to +125°C -55°C to +125°C PIN-PACKAGE 8 Plastic DIP 8 Plastic DIP 8 SO Dice* 8 Plastic DIP 8 SO 8 CERDIP 8 CERDIP Ordering Information continued on last page. * Dice are specified at TA = +25°C, D.C. parameters only. Contact factory for availability and processing to MIL-STD-883. Pin Configurations INA+ 1 V- 2 INB+ 3 INB- 4 MXL1013 8 INA7 OUTA 6 V+ 5 OUTB NOTE SO PIN CONFIGURATION DIFFERS FROM DIP. TOP VIEW OUTA+ 1 INA- 2 INA+ 3 V- 4 MXL1013 8 V+ 7 OUTB A 6 INBB 5 INB+ Pin Configurations continued on last page. OUTA 1 INA- 2 INA+ 3 V+ 4 INB+ 5 INB- 6 OUTB 7 N.C. 8 MXL1014 Wide SO 16 OUTD 15 IND14 IND+ 13 V12 INC+ 11 INC10 OUTC 9 N.C. Maxim Integrated Products 1 For free samples & the latest literature or phone For small orders, phone MXL1013/MXL1014 Dual/Quad Precision Op Amps ABSOLUTE MAXIMUM RATINGS Supply Input Voltage ............................Equal to Positive Supply Voltage ........................5V Below Negative Supply Voltage Output Short-Circuit Differential Input Voltage Continuous Power Dissipation TA = +70°C 8-Pin Plastic DIP derate 9.09mW/°C above +70°C ......727mW 8-Pin SO derate 5.88mW/°C above +70°C ..................471mW 8-Pin CERDIP derate 8.00mW/°C above +70°C ..........640mW 14-Pin Plastic DIP derate 10.00mW/°C above +70°C ..800mW 14-Pin CERDIP derate 9.09mW/°C above +70°C ........727mW 16-Pin Wide SO derate 9.52mW/°C above +70°C .......762mW Operating Temperature Ranges MXL1013/MXL1014C_ to +70°C to +85°C MXL1013/MXL1014AM_,M_ ..........................-55°C to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10sec .............................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS Note 1 VS = ±15V, VCM = 0V, TA = +25°C, unless otherwise noted. PARAMETER CONDITIONS Input Offset Voltage MXL1013 MXL1014 MXL101_D/I MXL1013AM MXL1014AM MIN TYP MAX 40 150 50 180 _Ordering Information continued mm PART TEMP. RANGE PIN-PACKAGE INA+ INB+ MXL1014CN 0°C to +70°C 14 Plastic DIP MXL1014DS 0°C to +70°C 16 Wide SO MXL1014DN 0°C to +70°C 14 Plastic DIP MXL1014IN -40°C to +85°C 14 Plastic DIP MXL1014IS -40°C to +85°C 16 Wide SO MXL1014AMJ -55°C to +125°C 14 CERDIP MXL1014MJ -55°C to +125°C 14 CERDIP Contact factory for availability and processing to MIL-STD-883. Dual/Quad Precision Op Amps Information MXL1013/MXL1014 PDIPN.EPS Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 8 Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 1998 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

PDF Datasheet Preview

Recommended for New Designs

This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains available for existing users. A Maxim replacement or an industry second-source may be available. Please see the QuickView data sheet for this part or contact technical support for assistance. For further information, contact Maxim’s Applications Tech Support.

Dual/Quad Precision Op Amps

MXL1013/MXL1014

The Maxim MXL1013 is a precision dual op amp that upgrades the performance of popular devices such as the MC1458/MC1558, LM158 and OP221. The Maxim MXL1014 is a precision quad op amp that directly upgrades designs in the industry-standard 14-pin DIP configuration and has specifications similar to the LT1013. The MXL1013 and MXL1014 are pin compatible with industry standards such as the LT1013 and LT1014.

Precision specifications include 40µV offset voltage, 0.3µV/°C drift TCVOS , 117dB CMRR, and 120dB PSRR. While supply current is typically only 350µA per amplifier, the outputs can source and sink more than 20mA.

Both the MXL1013 and the MXL1014 can be operated from a single +5V power supply. The input voltage range includes ground and the outputs swing to within a few millivolts of ground.

Battery-Powered Precision Instrumentation Strain-Gauge Signal Conditioners Thermocouple Amplifiers Instrumentation Amplifiers
4mA to 20mA Current-Loop Transmitters

Multiple-Limit Threshold Detection

Active Filters

Multiple Gain Blocks
o Single-Supply Operation Input Voltage Range Extends to Ground Output Swings to Ground while Sinking Current
o 150µV Max Offset Voltage o Low Drift 2µV/°C Max o 0.8nA Max Offset Current o Guaranteed High Gain
5mA Load Current Million Min 17mA Load Current Million Min o 500µA Max Supply Current per Amplifier o Low Voltage Noise 0.1Hz to 10Hz, 0.55µVp-p o Lower Current Noise than OP07:
Ordering Information

PART MXL1013CN8 MXL1013DN8 MXL1013DS8 MXL1013DC/D MXL1013IN8 MXL1013IS8 MXL1013AMJ8 MXL1013MJ8

TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C
-40°C to +85°C -40°C to +85°C -55°C to +125°C -55°C to +125°C

PIN-PACKAGE 8 Plastic DIP 8 Plastic DIP 8 SO Dice* 8 Plastic DIP 8 SO 8 CERDIP** 8 CERDIP**
Ordering Information continued on last page. * Dice are specified at TA = +25°C, D.C. parameters only. **Contact factory for availability and processing to MIL-STD-883.

Pin Configurations

INA+ 1 V- 2

INB+ 3 INB- 4

MXL1013
8 INA7 OUTA 6 V+ 5 OUTB

NOTE SO PIN CONFIGURATION DIFFERS FROM DIP.

TOP VIEW

OUTA+ 1 INA- 2 INA+ 3 V- 4

MXL1013 8 V+
7 OUTB A
6 INBB
5 INB+

Pin Configurations continued on last page.

OUTA 1 INA- 2 INA+ 3

V+ 4 INB+ 5 INB- 6 OUTB 7 N.C. 8

MXL1014

Wide SO
16 OUTD 15 IND14 IND+ 13 V12 INC+ 11 INC10 OUTC 9 N.C.

Maxim Integrated Products 1

For free samples & the latest literature or phone For small orders, phone

MXL1013/MXL1014

Dual/Quad Precision Op Amps

ABSOLUTE MAXIMUM RATINGS

Supply Input Voltage ............................Equal to Positive Supply Voltage
........................5V Below Negative Supply Voltage Output Short-Circuit Differential Input Voltage Continuous Power Dissipation TA = +70°C
8-Pin Plastic DIP derate 9.09mW/°C above +70°C ......727mW 8-Pin SO derate 5.88mW/°C above +70°C ..................471mW 8-Pin CERDIP derate 8.00mW/°C above +70°C ..........640mW 14-Pin Plastic DIP derate 10.00mW/°C above +70°C ..800mW
14-Pin CERDIP derate 9.09mW/°C above +70°C ........727mW 16-Pin Wide SO derate 9.52mW/°C above +70°C .......762mW Operating Temperature Ranges MXL1013/MXL1014C_ to +70°C to +85°C MXL1013/MXL1014AM_,M_ ..........................-55°C to +125°C Storage Temperature Range .............................-65°C to +150°C

Lead Temperature soldering, 10sec .............................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS Note 1

VS = ±15V, VCM = 0V, TA = +25°C, unless otherwise noted.

PARAMETER

CONDITIONS

Input Offset Voltage

MXL1013

MXL1014

MXL101_D/I

MXL1013AM MXL1014AM MIN TYP MAX
40 150
50 180
_Ordering Information continued mm

PART

TEMP. RANGE

PIN-PACKAGE

INA+

INB+

MXL1014CN
0°C to +70°C
14 Plastic DIP

MXL1014DS
0°C to +70°C
16 Wide SO

MXL1014DN
0°C to +70°C
14 Plastic DIP

MXL1014IN
-40°C to +85°C
14 Plastic DIP

MXL1014IS
-40°C to +85°C
16 Wide SO

MXL1014AMJ
-55°C to +125°C
14 CERDIP**

MXL1014MJ
-55°C to +125°C
14 CERDIP**
**Contact factory for availability and processing to MIL-STD-883.

Dual/Quad Precision Op Amps

Information

MXL1013/MXL1014 PDIPN.EPS

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
8 Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
1998 Maxim Integrated Products

Printed USA
is a registered trademark of Maxim Integrated Products.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MXL1013DS8+T Datasheet file may be downloaded here without warranties.

Datasheet ID: MXL1013DS8+T 647485