MAX98372EWV+T

MAX98372EWV+T Datasheet

MAX98372

Part	Datasheet
MAX98372EWV+T	MAX98372EWV+T (pdf)

Related Parts	Information
MAX98372EVSYS#	MAX98372EVSYS#

PDF Datasheet Preview
MAX98372 Digital Input Class D Amplifier with DHT and Brownout Protection High-Power Digital Class D with Brownout Protection and DHT Requires No Programming NDA Required. Request Full Data Sheet Overview The MAX98372 is a high-efficiency, mono Class D audio amplifier featuring dynamic headroom tracking DHT and brownout protection. DHT automatically optimizes the headroom available to the Class D amplifier as the power supply voltage varies, due to sudden transients and declining battery life to maintain a consistent listening experience. A wide 5.5V to 18V supply range allows the device to reach 19W into an 8Ω load. The MAX98372’s flexible digital audio interface DAI supports I2S, left-justified, and TDM formats. The digital audio interface accepts 32kHz, 44.1kHz, 48kHz, 88.2kHz, and 96kHz sample rates with 16-/24-/32-bit data supported for all data formats. In TDM mode, the device can support up to 16 channels of audio data. A unique clocking structure eliminates the need for an external MCLK signal that is typically needed for PCM communication. This reduces pin count and simplifies board layout. Active emissions limiting with edge rate control minimizes EMI and eliminates the need for output filtering found in traditional Class D devices. An 8-bit PVDD supply voltage ADC enables the dynamic headroom tracking circuit. DHT optimizes audio program peak behavior as the supply voltage varies and provides flexible user-defined parameters. Thermal foldback protection ensures robust behavior when the thermal limits of the device are exercised. The circuit can be enabled to automatically reduce the output power above a user specified temperature. This allows for uninterrupted music playback even at high ambient temperatures. Traditional thermal protection is also available in addition to robust overcurrent protection. All MAX98372 control is performed using a standard 2-wire, I2C interface. One of sixteen slave addresses can be selected through two, four-level address pins. The IC is available in a 0.4mm pitch, 30-bump WLP package. It is specified over the extended, -40°C to +85° C temperature range. Key Features • Wide Supply Range 5.5V to 18V • Dynamic Headroom Tracking Maintains a Consistent Listening Experience • Integrated Thermal Foldback Allows Robust Operation in a WLP Package • Remote Output Sensing Allows Up to 20dB THD+N Improvement When Ferrites Are Used • Class D Edge Rate Control Enables Filterless Operation • 110dB A-Weighted Dynamic Range • Output Power at 1% THD+N: 15.7W into 8Ω, VPVDD = 17V 13.2W into 4Ω, VPVDD = 12V • Output Power at 10% THD+N 19W into 8Ω, VPVDD = 17V 15.8W into 4Ω, VPVDD = 12V • Speaker Amplifier Efficiency 91% at 10W into 8Ω, VPVDD = 12V 81% at 15W into 4Ω, VPVDD = 12V • ALC Provides Battery Brownout Protection • Extensive Click-and-Pop Suppression • Space Saving, 30-Bump WLP Package 2.2mm x 2.8mm x 0.6mm, 0.4mm Pitch Applications/Uses • Notebook Computers • Soundbars • Tablets MAX98372 Digital Input Class D Amplifier with DHT and Brownout Protection High-Power Digital Class D with Brownout Protection and DHT Requires No Programming KEY SPECS Class Spkr. Spkr. Spkr. POUT Spkr. Amp. Amp. Amp. into 4Ω into 4Ω into 8Ω into 8Ω Amp. SNR dB PSRR Package/Pins dB VCC ICC 1% 10% 1% 10% Half V mA THD+N THD+N THD+N THD+N Pwr. W THD+N min max typ min Weighted MAX98372 NEW! D 18 19 WLP/30 3/8/2016

PDF Datasheet Preview

MAX98372

Digital Input Class D Amplifier with DHT and Brownout Protection

High-Power Digital Class D with Brownout Protection and DHT Requires No Programming

NDA Required. Request Full Data Sheet

Overview

The MAX98372 is a high-efficiency, mono Class D audio amplifier featuring dynamic headroom tracking DHT and brownout protection. DHT automatically optimizes the headroom available to the Class D amplifier as the power supply voltage varies, due to sudden transients and declining battery life to maintain a consistent listening experience. A wide 5.5V to 18V supply range allows the device to reach 19W into an 8Ω load.

The MAX98372’s flexible digital audio interface DAI supports I2S, left-justified, and TDM formats. The digital audio interface accepts 32kHz, 44.1kHz, 48kHz, 88.2kHz, and 96kHz sample rates with 16-/24-/32-bit data supported for all data formats. In TDM mode, the device can support up to 16 channels of audio data. A unique clocking structure eliminates the need for an external MCLK signal that is typically needed for PCM communication. This reduces pin count and simplifies board layout.

Active emissions limiting with edge rate control minimizes EMI and eliminates the need for output filtering found in traditional Class D devices.

An 8-bit PVDD supply voltage ADC enables the dynamic headroom tracking circuit. DHT optimizes audio program peak behavior as the supply voltage varies and provides flexible user-defined parameters.

Thermal foldback protection ensures robust behavior when the thermal limits of the device are exercised. The circuit can be enabled to automatically reduce the output power above a user specified temperature. This allows for uninterrupted music playback even at high ambient temperatures. Traditional thermal protection is also available in addition to robust overcurrent protection.

All MAX98372 control is performed using a standard 2-wire, I2C interface. One of sixteen slave addresses can be selected through two, four-level address pins. The IC is available in a 0.4mm pitch, 30-bump WLP package. It is specified over the extended, -40°C to +85° C temperature range.

Key Features
• Wide Supply Range 5.5V to 18V
• Dynamic Headroom Tracking Maintains a Consistent Listening Experience
• Integrated Thermal Foldback Allows Robust Operation in a WLP Package
• Remote Output Sensing Allows Up to 20dB THD+N Improvement When Ferrites Are

Used
• Class D Edge Rate Control Enables Filterless Operation
• 110dB A-Weighted Dynamic Range
• Output Power at 1% THD+N:
15.7W into 8Ω, VPVDD = 17V 13.2W into 4Ω, VPVDD = 12V
• Output Power at 10% THD+N 19W into 8Ω, VPVDD = 17V 15.8W into 4Ω, VPVDD = 12V
• Speaker Amplifier Efficiency 91% at 10W into 8Ω, VPVDD = 12V 81% at 15W into 4Ω, VPVDD = 12V
• ALC Provides Battery Brownout Protection
• Extensive Click-and-Pop Suppression
• Space Saving, 30-Bump WLP Package 2.2mm x 2.8mm x 0.6mm, 0.4mm Pitch

Applications/Uses
• Notebook Computers
• Soundbars
• Tablets

MAX98372

Digital Input Class D Amplifier with DHT and Brownout Protection

High-Power Digital Class D with Brownout Protection and DHT Requires No Programming

KEY SPECS

Class Spkr. Spkr. Spkr. POUT Spkr. Amp. Amp. Amp. into 4Ω into 4Ω into 8Ω into 8Ω Amp.

SNR dB

PSRR Package/Pins dB

VCC ICC 1% 10% 1% 10% Half V mA THD+N THD+N THD+N THD+N Pwr.

W THD+N
min max typ min

Weighted

MAX98372 NEW! D 18 19

WLP/30
3/8/2016

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX98372EWV+T Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX98372EWV+T 647441