MAX7306EVKIT+

MAX7306EVKIT+ Datasheet

MAX7306 Evaluation Kit/Evaluation System

Part	Datasheet
MAX7306EVKIT+	MAX7306EVKIT+ (pdf)

PDF Datasheet Preview
MAX7306 Evaluation Kit/Evaluation System Evaluate MAX7306/MAX7307 The MAX7306 evaluation kit EV kit is a fully assembled and tested printed circuit board PCB that demonstrates the capabilities of the MAX7306 4-port leveltranslating GPIO with latching transition detection, blink, and pulse-width modulation PWM . The MAX7306 EV kit also includes 98SE/2000/XP-compatible software that provides a simple graphical user interface GUI for exercising the MAX7306’s features. The MAX7306 evaluation system EV system includes a MAX7306 EV kit and a Maxim CMAXQUSB serialinterface board. The CMAXQUSB board connects to a PC’s USB port and allows the transfer of I2C commands to the MAX7306 EV kit. The EV kit comes with the MAX7306AUB+ installed. The MAX7306 EV kit can also be used to evaluate the MAX7307. Contact factory for free samples of the pincompatible MAX7307AUB+ to evaluate this part. Windows is a registered trademark of Microsoft Corp. Component Lists MAX7306 EV System PART MAX7306EVKIT+ CMAXQUSB+ QTY 1 DESCRIPTION MAX7306 EV kit Serial-interface board 400kHz 2-Wire Serial Interface, 5.5V Tolerant 1.62V to 3.6V Operation VDD 1.4V to 5.5V I/O Level Translation Port Supply VLA High Output Sink to 25mA per Port Proven PCB Layout Windows 98SE/2000/XP-Compatible Evaluation Software Fully Assembled and Tested EV System Includes USB Connectivity Ordering Information PART MAX7306EVKIT+ TYPE EV kit INTERFACE User-supplied I2C interface MAX7306EVCMAXQU+ EV system CMAXQUSB serialinterface board +Denotes a lead-free and RoHS-compliant EV kit. Note The MAX7306 EV kit software is designed for use with the complete EV system. The EV system includes both the Maxim CMAXQUSB board and the EV kit. If the Windows software will not be used, the EV kit board can be purchased without the Maxim CMAXQUSB board. MAX7306 EV Kit DESIGNATION C1 1µF ±15%, 16V X7R ceramic 1 capacitor 0603 TDK C1608X7R1C105M 10µF ±15%, 10V X5R ceramic 1 capacitor 0805 TDK C2012X5R1A106M 0.1µF ±15%, 25V X7R ceramic 1 capacitor 0603 TDK C1608X7R1E104K 0 Not installed, capacitor 0603 White LED PLCC-2 OPTEK OVS9WBCR9 RGB LED 2.7mm x 2.4mm x 1 0.95mm OPTEK OVSTRGBAC6 1 2 x 10 right-angle female receptacle µMAX is a registered trademark of Maxim Integrated Products, Inc. DESIGNATION JU1, JU2, JU5 JU3, JU4 JU6 R1 R2 R3 R4 R5 R6 R7 R8, R9, R10 R11 S1, S2 3-pin headers 2-pin headers 1 5-pin header 1 10kΩ ±5% resistor 0603 1 150Ω ±5% resistor 0603 1 160Ω ±5% resistor 0603 1 270Ω ±5% resistor 0603 1 68Ω ±5% resistor 0603 1 100kΩ ±5% resistor 0603 1 0Ω ±5% resistor 0603 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at Evaluate MAX7306/MAX7307 MAX7306 Evaluation Kit/Evaluation System Component Suppliers SUPPLIER PHONE WEBSITE OPTEK Technologies 800-341-4747 TDK Corp. 847-803-6100 Note Indicate that you are using the MAX7306 when contacting these component suppliers. FILE INSTALL.EXE MAX7306.EXE FTD2XX.INF UNINST.INI TROUBLESHOOTING_USB.PDF MAX7306 EV Kit Files DESCRIPTION Installs the EV kit files on your computer Application program USB device driver file Uninstalls the EV kit software USB driver installation help file Quick Start Recommended Equipment • One 5V power supply • MAX7306 EV system MAX7306 EV kit Maxim CMAXQUSB interface board USB cable included • A user-supplied Windows 98SE/2000/XP PC with a spare USB port Note In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software. Text in bold and underlined refers to items from the Windows 98SE/2000/XP operating system. Procedure The MAX7306 is fully assembled and tested. Caution Do not turn on the power supply until all connections are made. 1 Visit to download the latest version of the EV kit software, 7306Rxx.ZIP. 2 Install the MAX7306 evaluation software on your computer by running the INSTALL.EXE program. The program files are copied and icons are created in the Windows Start menu. 3 On the CMAXQUSB board, ensure that the shunt of JU1 is in the 3.3V position. 4 Enable the I2C pullup resistors on the CMAXQUSB board by setting the DIP switches on SW1 to the ON position. 5 For the MAX7306 EV kit, make sure that the shunts of all jumpers are in the following default positions: JU1 2-3 CMAXQUSB provides the VDD supply. JU2 1-2 P1 drives the white LED D1 . JU3 1-2 P2 drives the red LED of D2. JU4 1-2 P3 drives the green LED of D2. JU5 1-2 P4 drives the blue LED of D2. JU6 1-3 I2C slave address is 1001100x 0x98 . 6 Carefully align the MAX7306 EV kit’s 20-pin connector with the 20-pin connector of the CMAXQUSB board and press them together. 7 Connect the 5V power supply between the MAX7306 EV kit’s VLA and GND pads. 8 Turn on the 5V power supply. Evaluate MAX7306/MAX7307 MAX7306 Evaluation Kit/Evaluation System 9 Connect the USB cable from the PC to the CMAXQUSB board. A Building Driver Database window pops up in addition to a New Hardware Found message, if this is the first time program runs on this PC. If you do not see a window that is similar to the one described above after 30s, remove the USB cable from the CMAXQUSB and reconnect it. Administrator privileges are required to install the USB device driver on Windows 2000 and XP. Refer to the TROUBLESHOOTING_USB.PDF document included with the software if you have any problems during this step. 10 Follow the directions of the Add New Hardware Wizard to install the USB device driver. Choose the Search for the best driver for your device option. Specify the location of the device driver to be default installation directory using the Browse button. 11 Start the MAX7306 EV kit software by opening its icon in the Start menu. The GUI main window will appear, as shown in Figure

PDF Datasheet Preview

MAX7306 Evaluation Kit/Evaluation System

Evaluate MAX7306/MAX7307

The MAX7306 evaluation kit EV kit is a fully assembled and tested printed circuit board PCB that demonstrates the capabilities of the MAX7306 4-port leveltranslating GPIO with latching transition detection, blink, and pulse-width modulation PWM . The MAX7306 EV kit also includes 98SE/2000/XP-compatible software that provides a simple graphical user interface GUI for exercising the MAX7306’s features.

The MAX7306 evaluation system EV system includes a MAX7306 EV kit and a Maxim CMAXQUSB serialinterface board.

The CMAXQUSB board connects to a PC’s USB port and allows the transfer of I2C commands to the MAX7306 EV kit.

The EV kit comes with the MAX7306AUB+ installed. The MAX7306 EV kit can also be used to evaluate the MAX7307. Contact factory for free samples of the pincompatible MAX7307AUB+ to evaluate this part.

Windows is a registered trademark of Microsoft Corp.

Component Lists

MAX7306 EV System

PART MAX7306EVKIT+ CMAXQUSB+

QTY 1

DESCRIPTION MAX7306 EV kit Serial-interface board
400kHz 2-Wire Serial Interface, 5.5V Tolerant 1.62V to 3.6V Operation VDD 1.4V to 5.5V I/O Level Translation Port Supply

VLA High Output Sink to 25mA per Port Proven PCB Layout Windows 98SE/2000/XP-Compatible Evaluation

Software Fully Assembled and Tested EV System Includes USB Connectivity
Ordering Information

PART MAX7306EVKIT+

TYPE EV kit

INTERFACE

User-supplied I2C interface

MAX7306EVCMAXQU+

EV system

CMAXQUSB serialinterface board
+Denotes a lead-free and RoHS-compliant EV kit.

Note The MAX7306 EV kit software is designed for use with the complete EV system. The EV system includes both the Maxim CMAXQUSB board and the EV kit. If the Windows software will not be used, the EV kit board can be purchased without the Maxim CMAXQUSB board.

MAX7306 EV Kit

DESIGNATION C1
1µF ±15%, 16V X7R ceramic 1 capacitor 0603

TDK C1608X7R1C105M
10µF ±15%, 10V X5R ceramic
1 capacitor 0805

TDK C2012X5R1A106M
0.1µF ±15%, 25V X7R ceramic
1 capacitor 0603

TDK C1608X7R1E104K
0 Not installed, capacitor 0603

White LED PLCC-2 OPTEK OVS9WBCR9

RGB LED 2.7mm x 2.4mm x
1 0.95mm

OPTEK OVSTRGBAC6
1 2 x 10 right-angle female receptacle
µMAX is a registered trademark of Maxim Integrated Products, Inc.

DESIGNATION JU1, JU2, JU5

JU3, JU4 JU6 R1 R2 R3 R4 R5 R6 R7

R8, R9, R10 R11

S1, S2
3-pin headers
2-pin headers
1 5-pin header
1 10kΩ ±5% resistor 0603
1 150Ω ±5% resistor 0603
1 160Ω ±5% resistor 0603
1 270Ω ±5% resistor 0603
1 68Ω ±5% resistor 0603
1 100kΩ ±5% resistor 0603
1 0Ω ±5% resistor 0603
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at

Evaluate MAX7306/MAX7307

MAX7306 Evaluation Kit/Evaluation System

Component Suppliers

SUPPLIER

PHONE

WEBSITE

OPTEK Technologies
800-341-4747

TDK Corp.
847-803-6100

Note Indicate that you are using the MAX7306 when contacting these component suppliers.

FILE INSTALL.EXE MAX7306.EXE FTD2XX.INF UNINST.INI TROUBLESHOOTING_USB.PDF

MAX7306 EV Kit Files

DESCRIPTION Installs the EV kit files on your computer Application program USB device driver file Uninstalls the EV kit software USB driver installation help file

Quick Start

Recommended Equipment
• One 5V power supply
• MAX7306 EV system

MAX7306 EV kit Maxim CMAXQUSB interface board USB cable included
• A user-supplied Windows 98SE/2000/XP PC with a spare USB port

Note In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software. Text in bold and underlined refers to items from the Windows 98SE/2000/XP operating system.

Procedure The MAX7306 is fully assembled and tested. Caution Do not turn on the power supply until all connections are made.
1 Visit to download the latest version of the EV kit software, 7306Rxx.ZIP.
2 Install the MAX7306 evaluation software on your computer by running the INSTALL.EXE program. The program files are copied and icons are created in the Windows Start menu.
3 On the CMAXQUSB board, ensure that the shunt of JU1 is in the 3.3V position.
4 Enable the I2C pullup resistors on the CMAXQUSB board by setting the DIP switches on SW1 to the ON position.
5 For the MAX7306 EV kit, make sure that the shunts of all jumpers are in the following default positions:

JU1 2-3 CMAXQUSB provides the VDD supply.

JU2 1-2 P1 drives the white LED D1 .

JU3 1-2 P2 drives the red LED of D2.

JU4 1-2 P3 drives the green LED of D2.

JU5 1-2 P4 drives the blue LED of D2. JU6 1-3 I2C slave address is 1001100x
0x98 .
6 Carefully align the MAX7306 EV kit’s 20-pin connector with the 20-pin connector of the CMAXQUSB board and press them together.
7 Connect the 5V power supply between the MAX7306 EV kit’s VLA and GND pads.
8 Turn on the 5V power supply.

Evaluate MAX7306/MAX7307

MAX7306 Evaluation Kit/Evaluation System
9 Connect the USB cable from the PC to the CMAXQUSB board. A Building Driver Database window pops up in addition to a New Hardware Found message, if this is the first time program runs on this PC. If you do not see a window that is similar to the one described above after 30s, remove the USB cable from the CMAXQUSB and reconnect it. Administrator privileges are required to install the USB device driver on Windows 2000 and XP. Refer to the TROUBLESHOOTING_USB.PDF document included with the software if you have any problems during this step.
10 Follow the directions of the Add New Hardware Wizard to install the USB device driver. Choose the Search for the best driver for your device option. Specify the location of the device driver to be default installation directory using the Browse button.
11 Start the MAX7306 EV kit software by opening its icon in the Start menu. The GUI main window will appear, as shown in Figure

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX7306EVKIT+ Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX7306EVKIT+ 647399