MAX72024C+

MAX72024C+ Datasheet

MAX72024C

Part	Datasheet
MAX72024C+	MAX72024C+ (pdf)

PDF Datasheet Preview
MAX72024C Generation II Enhanced 6.0Gbps 24-PHY SAS Expander Industry's Most Advanced 6.0Gbps SAS Expander This product is Not Recommended for New Designs. Some versions may be No Longer Available or being discontinued and subject to Last Time Buy, after which new orders can not be placed. Description The MAX72024C is a next-generation enhanced 24-PHY, serial-attached SCSI-2 SAS-2 compatible expander that operates at 1.5Gbps, 3.0Gbps, and 6.0Gbps on a PHY-by-PHY basis . This device is used for server and enclosure applications for midrange- and enterprisestorage systems requiring active SAS port expansion. This device offers an evolutionary upgrade path for systems that currently employ parallel SCSI technology and rely heavily on SCSI-centric software or management solutions. By combining industry-leading I/O, embedded enclosure functions, and a high-performance internal switching architecture, this device provides all the features needed to design, develop, and deploy highperformance SAS storage solutions. Key Features • 1.5Gbps, 3.0Gbps, and 6.0Gbps 24-PHY, Self-Configuring SAS Expander • ANSI T10 SAS-2.1/SAS Protocol Layer SPL Compliant • Automatic Input-Signal Equalization Including Decision Feedback Equalization DFE • Multiple Programmable Output-Deemphasis Levels • Multiple Programmable Output-Voltage Levels • Embedded Multicontext 32-Bit Microprocessor Used for Local Control and Expander or Vendor-Unique Enclosure Management Functions • On-Chip Trace Buffer • Internal ECC-Protected User Data SRAM • Standard EJTAG Processor Debug Interface • Software Compatible with Other Maxim Enclosure Management Processors • Two Operating Modes for External Program Memory Parallel Memory and Serial Peripheral Interface SPI Memory • SPI Interface for Accessing an External Serial Flash Memory Device with Optional Dual/Quad I/O SPI Support • Auxiliary SPI Port for Access to Peripheral SPI Devices Manual Access Only • Integrated PHY Snooping on multiple channels • Flexible SAS-2 Compliant Address-Based Zoning • Supports Table Routing to Destination Addresses • Supports SAS-2 Table-to-Table Routing • SMP and SSP Virtual PHY Target/Initiator Capability • STP/SATA Bridging Supporting Multiple Affiliations One Per PHY • STP Initiator Capability • SAS-2.1/SPL Optical Link Mode • SAS-2.1/SPL Power Management • LPC Interface for Trusted Platform Modules • Unlimited Variable Wide-Port Capability • Extensive Diagnostic and Built-In Self-Test BIST Capabilities • Multimaster High-Speed and 10-Bit Device ID Support • Multirate UARTs with Modem Control • 10/100 Ethernet Media-Access Controllers MACs with Reduced Media-Independent Interface RMII • Flexible General-Purpose Input/Output GPIO for LEDs, Fan Tachometer, and Other Functions • SFF-8485 Serial I/O Support • Analog-to-Digital Converters ADCs • Digital Temperature Monitor • 75MHz or 150MHz LVTTL/LVPECL Reference Clock • 1.0V DC, 1.8V DC, and 3.3V DC External Power Supplies • Low Power CMOS • 35mm x 35mm, 924-Pin FCBGA Package with Heat Spreader 1.0mm Pin Pitch • RoHS-Compliant Package Applications/Uses • Enterprise-Storage Environments • Fabric-Attached Storage FAS Systems • Fixed-Content Storage Systems • JBOD Arrays • Near-Line Storage-Replacement Systems • Network-Attached Storage NAS Systems • Rack-Mounted Servers with RAID • Storage-Area Network SAN Appliances MAX72024C#W MAX72024C# MAX72024C+ Package FCBGA 924Pin 1225mm2 Package FCBGA 924Pin 1225mm2 Package HSBGAF 924Pin 2016 Maxim Integrated

PDF Datasheet Preview

MAX72024C

Generation II Enhanced 6.0Gbps 24-PHY SAS Expander

Industry's Most Advanced 6.0Gbps SAS Expander

This product is Not Recommended for New Designs. Some versions may be No Longer Available or being discontinued and subject to Last Time Buy, after which new orders can not be placed.

Description The MAX72024C is a next-generation enhanced 24-PHY, serial-attached SCSI-2 SAS-2 compatible expander that operates at 1.5Gbps, 3.0Gbps, and 6.0Gbps on a PHY-by-PHY basis . This device is used for server and enclosure applications for midrange- and enterprisestorage systems requiring active SAS port expansion.

This device offers an evolutionary upgrade path for systems that currently employ parallel SCSI technology and rely heavily on SCSI-centric software or management solutions. By combining industry-leading I/O, embedded enclosure functions, and a high-performance internal switching architecture, this device provides all the features needed to design, develop, and deploy highperformance SAS storage solutions.

Key Features
• 1.5Gbps, 3.0Gbps, and 6.0Gbps 24-PHY, Self-Configuring SAS Expander
• ANSI T10 SAS-2.1/SAS Protocol Layer SPL Compliant
• Automatic Input-Signal Equalization Including Decision Feedback Equalization DFE
• Multiple Programmable Output-Deemphasis Levels
• Multiple Programmable Output-Voltage Levels
• Embedded Multicontext 32-Bit Microprocessor Used for Local Control
and Expander or Vendor-Unique Enclosure Management Functions
• On-Chip Trace Buffer
• Internal ECC-Protected User Data SRAM
• Standard EJTAG Processor Debug Interface
• Software Compatible with Other Maxim Enclosure Management Processors
• Two Operating Modes for External Program Memory Parallel Memory and Serial

Peripheral Interface SPI Memory
• SPI Interface for Accessing an External Serial Flash Memory Device with Optional

Dual/Quad I/O SPI Support
• Auxiliary SPI Port for Access to Peripheral SPI Devices Manual Access Only
• Integrated PHY Snooping on multiple channels
• Flexible SAS-2 Compliant Address-Based Zoning
• Supports Table Routing to Destination Addresses
• Supports SAS-2 Table-to-Table Routing
• SMP and SSP Virtual PHY Target/Initiator Capability
• STP/SATA Bridging Supporting Multiple Affiliations One Per PHY
• STP Initiator Capability
• SAS-2.1/SPL Optical Link Mode
• SAS-2.1/SPL Power Management
• LPC Interface for Trusted Platform Modules
• Unlimited Variable Wide-Port Capability
• Extensive Diagnostic and Built-In Self-Test BIST Capabilities
• Multimaster High-Speed and 10-Bit Device ID Support
• Multirate UARTs with Modem Control
• 10/100 Ethernet Media-Access Controllers MACs with Reduced Media-Independent

Interface RMII
• Flexible General-Purpose Input/Output GPIO for LEDs, Fan Tachometer, and Other

Functions
• SFF-8485 Serial I/O Support
• Analog-to-Digital Converters ADCs
• Digital Temperature Monitor
• 75MHz or 150MHz LVTTL/LVPECL Reference Clock
• 1.0V DC, 1.8V DC, and 3.3V DC External Power Supplies
• Low Power CMOS
• 35mm x 35mm, 924-Pin FCBGA Package with Heat Spreader 1.0mm Pin Pitch
• RoHS-Compliant Package

Applications/Uses
• Enterprise-Storage Environments
• Fabric-Attached Storage FAS Systems
• Fixed-Content Storage Systems
• JBOD Arrays
• Near-Line Storage-Replacement Systems
• Network-Attached Storage NAS Systems
• Rack-Mounted Servers with RAID
• Storage-Area Network SAN Appliances

MAX72024C#W

MAX72024C#

MAX72024C+

Package

FCBGA 924Pin 1225mm2

Package

FCBGA 924Pin 1225mm2

Package

HSBGAF 924Pin
2016 Maxim Integrated

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX72024C+ Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX72024C+ 647392