MAX32600-P85B+W

MAX32600-P85B+W Datasheet

MAX32600

Part	Datasheet
MAX32600-P85B+W	MAX32600-P85B+W (pdf)

PDF Datasheet Preview
MAX32600 EVALUATION KIT AVAILABLE Wellness Measurement Microcontroller The MAX32600 microcontroller is based on the industry-standard 32-bit RISC CPU operating at up to 24MHz. It includes 256KB of flash memory, 32KB of SRAM, a 2KB instruction cache, and integrated high-performance analog peripherals. The MAX32600 is available in the following package options 192-ball, 12mm x 12mm CTBGA 120-ball, 7mm x 7mm CTBGA and 108-ball, 5.4mm x 4.3mm WLP. ●● Wearable Medical Devices ●● Pulse Oximetry Measurement ●● Galvanic Skin Response Measurement ●● Blood Glucose Metering Simplified Functional Diagram 4 x SPST ANALOG SWITCHES 16 S/E OR 8 DIFF MUX INPUTS TEMP SENSOR, CALIBRATION MUX MAX32600 2 x 12-BIT DACS 16-BIT ADC WITH PGA 2 x 8-BIT DACS ANALOG FRONT-END 4 x COMP/ AMPLIFIERS PROGRAMMABLE VOLTAGE REFERENCE 8 x PROGRAMMABLE LED DRIVERS 256KB FLASH 32KB SRAM CRC32/16 GENERATOR AES ENGINE MAA RNG SEED UNIQUE ID INSTANT ERASE KEY STORAGE NVIC ARM CORTE2X-M3 24MHz 2 x WATCHDOG TIMER 24MHz INTERNAL OSC SUPPLY VOLTAGE MONITORS 4 x 32-BIT TIMER 32-BIT REAL-TIME CLOCK WITH TIME OF DAY ALARM 3 x SPI MASTER 2 x UART 2 x I2C MASTER I2C SLAVE USB FULL SPEED 64 GPIOs LCD CONTROLLER 96/128/160 SEGMENTS JTAG TRUST PROTECTION UNIT SEE THE SELECTOR GUIDE FOR CONFIGURATION DETAILS. Benefits and Features ●● Integrated AFE Enables Precision Wellness Measurements with Minimal Discretes • 16-Bit ADC with Input Mux and PGA • Up to 500ksps Conversion Rate • PGA with Gain of 1, 2, 4, and 8 and Bypass Mode • Differential 8:1 or Single-Ended 16:1 Input Mux • Internal Mux Inputs for Measuring VDDA3 • Internal or External Voltage Reference • Programmable Buffers for ADC and DACs • Two 12-Bit DACs and Two 8-Bit DACs • Four Operational Amplifiers • Four Low-Power Comparators • Four Uncommitted SPST Analog Switches • Four Ground Switches • Up to Eight 100mA LED Driver Pairs Sink • Internal Temperature Sensor ●● Secure Valuable IP and Data with Robust On-Board Trust Protection Unit • Trust Protection Unit for End-to-End Security • AES Hardware Engine • µMAA for ECDSA and RSA • Hardware PRNG • Fast-Erase SRAM for Secure Key Storage ●● Industry’s Lowest Overall System Power Increases Battery Life • 175µA/MHz Active Power Executing Code from Cache • 1.25µA Current Consumption with Real-Time Clock Enable in LP0 • 1.8µA Current Consumption with Data Retention and Fast 15µs Wakeup in LP1 • Peripheral Clock Control • 6-Channel DMA Engine Enables Intelligent Peripheral Operation While Micro is in Sleep Mode ●● Flexible Package Options • 120-Ball CTBGA, 0.5mm Pitch, 7mm x 7mm • 192-Ball CTBGA, 0.65mm Pitch, 12mm x 12mm • 108-Bump WLP, 0.4mm Pitch, 5.4mm x 4.3mm Additional Benefits and Features and Ordering Information appear at end of data sheet. ARM and Cortex are registered trademarks of ARM Ltd. MAX32600 Wellness Measurement Microcontroller Absolute Maximum Ratings Voltage Range on VDD and VDDA3 with Respect to +3.6V Voltage Range on to 5.5V Voltage Range on Any Lead with Respect to GND excluding VBUS ........ -0.3V to VDD + 0.5V Voltage Range on Analog Pins with Respect to -0.3V to VDDA3 Total Current into VDD/VDDA3 Power Lines Sink ...........100mA Total Current Source VDD Power Lines Sink ..................100mA Output Current Sink by Any I/O Output Current Source by Any I/O Pin............................-25mA Output Current Source by Output Current Sink by LED Output Current Source by Operating Temperature Range............................ -40°C to +85°C Storage Temperature Range............................. -65°C to +150°C Soldering Temperature Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Thermal Characteristics Note 1 108 WLP Junction-to-Ambient Thermal Resistance 120 CTBGA Junction-to-Ambient Thermal Resistance Junction-to-Case Thermal Resistance 192 CTBGA Junction-to-Ambient Thermal Resistance Junction-to-Case Thermal Resistance Note 1 Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to Recommended DC Operating Conditions VDD = VRST to 3.6V, TA = -40°C to +85°C, unless otherwise noted. Note 2 PARAMETER CONDITIONS MAX UNITS Digital Domain Voltage Analog Domain Voltage 1.8V Internal Regulator Power-Fail Warning Voltage for Supply VDD VDDA3 VREG18 VPFW Note 3 Monitors VDD, PFWVSBIT = 0x0016 Power-Fail Reset Voltage Power-On-Reset Release Voltage VRST VSPOR Monitors VDD Monitors VDD or VDDB RAM Data Retention Voltage VDRV LP3 Active Current Note 4 IDDLP3 Cache disabled, fCK = 24MHz Cache enabled, execution from cache, 100% hit rate, fCK = 24MHz LP2 Current IDDLP2 One PMU channel enabled Each additional PMU channel LP1 Current LP0 Current LP2 Mode Resume Time IDDLP1 IDDLP0 tONLP2 RTC enabled, VDD supply current RTC disabled, VDD supply current RTC enabled, VDD supply current RTC disabled, VDD supply current One PMU channel active Ordering Information PART TEMP RANGE PIN-PACKAGE MAX32600-P85A+ -40°C to +85°C 192 CTBGA MAX32600-P85B+ -40°C to +85°C 192 CTBGA MAX32600-J85A+ -40°C to +85°C 120 CTBGA MAX32600-J85B+ -40°C to +85°C 120 CTBGA MAX32600-W85A+ -40°C to +85°C 108 WLP MAX32600-W85B+ -40°C to +85°C 108 WLP +Denotes a lead Pb -free/RoHS-compliant package. Package Information For the latest package outline information and land patterns footprints , go to Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN 192 CTBGA X19222+1C 21-0712 120 CTBGA X12077+1C 21-0899 108 WLP W1084A5+1 21-1075 Selector Table PART FLASH KB MAX32600-P85A+ MAX32600-P85B+ MAX32600-J85A+ MAX32600-J85B+ MAX32600-W85A+ MAX32600-W85B+ SRAM KB ADC CHANNELS 16 x 1, 8 x 2 16 x 1, 8 x 2 12 x 1, 6 x 2 12 x 1, 6 x 2 6 x 1, 3 x 2 6 x 1, 3 x 2 TRUST PROTECTION UNIT TPU No Yes No Yes No Yes 160-segment 160-segment No LCD No LCD No LCD No LCD PIN-PACKAGE 12mm x 12mm CTBGA 12mm x 12mm CTBGA 7mm x 7mm CTBGA 7mm x 7mm CTBGA 5.4mm x 4.3mm WLP 5.4mm x 4.3mm WLP Package/Feature Details LCD GPIO 8-bit ports For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2016 Maxim Integrated Products, Inc. 35

PDF Datasheet Preview

MAX32600

EVALUATION KIT AVAILABLE

Wellness Measurement Microcontroller

The MAX32600 microcontroller is based on the industry-standard 32-bit RISC CPU operating at up to 24MHz. It includes 256KB of flash memory, 32KB of SRAM, a 2KB instruction cache, and integrated high-performance analog peripherals. The MAX32600 is available in the following package options 192-ball, 12mm x 12mm CTBGA 120-ball, 7mm x 7mm CTBGA and 108-ball, 5.4mm x 4.3mm WLP.
●● Wearable Medical Devices ●● Pulse Oximetry Measurement ●● Galvanic Skin Response Measurement ●● Blood Glucose Metering

Simplified Functional Diagram
4 x SPST ANALOG SWITCHES
16 S/E OR 8 DIFF MUX INPUTS

TEMP SENSOR, CALIBRATION MUX

MAX32600
2 x 12-BIT DACS
16-BIT ADC WITH PGA
2 x 8-BIT DACS

ANALOG FRONT-END
4 x COMP/ AMPLIFIERS

PROGRAMMABLE VOLTAGE REFERENCE
8 x PROGRAMMABLE LED DRIVERS
256KB FLASH
32KB SRAM

CRC32/16 GENERATOR

AES ENGINE MAA

RNG SEED UNIQUE ID INSTANT ERASE KEY STORAGE

NVIC

ARM CORTE2X-M3 24MHz
2 x WATCHDOG TIMER
24MHz INTERNAL OSC SUPPLY VOLTAGE MONITORS 4 x 32-BIT TIMER
32-BIT REAL-TIME CLOCK WITH TIME OF DAY ALARM
3 x SPI MASTER 2 x UART
2 x I2C MASTER I2C SLAVE USB

FULL SPEED
64 GPIOs

LCD CONTROLLER 96/128/160 SEGMENTS

JTAG

TRUST PROTECTION UNIT

SEE THE SELECTOR GUIDE FOR CONFIGURATION DETAILS.

Benefits and Features
●● Integrated AFE Enables Precision Wellness Measurements with Minimal Discretes
• 16-Bit ADC with Input Mux and PGA
• Up to 500ksps Conversion Rate
• PGA with Gain of 1, 2, 4, and 8 and Bypass Mode
• Differential 8:1 or Single-Ended 16:1 Input Mux
• Internal Mux Inputs for Measuring VDDA3
• Internal or External Voltage Reference
• Programmable Buffers for ADC and DACs
• Two 12-Bit DACs and Two 8-Bit DACs
• Four Operational Amplifiers
• Four Low-Power Comparators
• Four Uncommitted SPST Analog Switches
• Four Ground Switches
• Up to Eight 100mA LED Driver Pairs Sink
• Internal Temperature Sensor
●● Secure Valuable IP and Data with Robust On-Board Trust Protection Unit
• Trust Protection Unit for End-to-End Security
• AES Hardware Engine
• µMAA for ECDSA and RSA
• Hardware PRNG
• Fast-Erase SRAM for Secure Key Storage
●● Industry’s Lowest Overall System Power Increases Battery Life
• 175µA/MHz Active Power Executing Code from Cache
• 1.25µA Current Consumption with Real-Time Clock Enable in LP0
• 1.8µA Current Consumption with Data Retention and Fast 15µs Wakeup in LP1
• Peripheral Clock Control
• 6-Channel DMA Engine Enables Intelligent Peripheral Operation While Micro is in Sleep Mode
●● Flexible Package Options
• 120-Ball CTBGA, 0.5mm Pitch, 7mm x 7mm
• 192-Ball CTBGA, 0.65mm Pitch, 12mm x 12mm
• 108-Bump WLP, 0.4mm Pitch, 5.4mm x 4.3mm
Additional Benefits and Features and Ordering Information appear at end of data sheet.

ARM and Cortex are registered trademarks of ARM Ltd.

MAX32600

Wellness Measurement Microcontroller

Absolute Maximum Ratings

Voltage Range on VDD and VDDA3 with Respect to +3.6V

Voltage Range on to 5.5V Voltage Range on Any Lead with

Respect to GND excluding VBUS ........ -0.3V to VDD + 0.5V Voltage Range on Analog Pins with

Respect to -0.3V to VDDA3 Total Current into VDD/VDDA3 Power Lines Sink ...........100mA Total Current Source VDD Power Lines Sink ..................100mA

Output Current Sink by Any I/O Output Current Source by Any I/O Pin............................-25mA Output Current Source by Output Current Sink by LED Output Current Source by Operating Temperature Range............................ -40°C to +85°C Storage Temperature Range............................. -65°C to +150°C Soldering Temperature

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Package Thermal Characteristics Note 1
108 WLP Junction-to-Ambient Thermal Resistance
120 CTBGA Junction-to-Ambient Thermal Resistance Junction-to-Case Thermal Resistance
192 CTBGA Junction-to-Ambient Thermal Resistance Junction-to-Case Thermal Resistance

Note 1 Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to

Recommended DC Operating Conditions

VDD = VRST to 3.6V, TA = -40°C to +85°C, unless otherwise noted. Note 2

PARAMETER

CONDITIONS

MAX UNITS

Digital Domain Voltage Analog Domain Voltage 1.8V Internal Regulator Power-Fail Warning Voltage for Supply

VDD VDDA3 VREG18

VPFW

Note 3 Monitors VDD, PFWVSBIT = 0x0016

Power-Fail Reset Voltage

Power-On-Reset Release Voltage

VRST VSPOR

Monitors VDD Monitors VDD or VDDB

RAM Data Retention Voltage

VDRV

LP3 Active Current Note 4

IDDLP3

Cache disabled, fCK = 24MHz

Cache enabled, execution from cache, 100% hit rate, fCK = 24MHz

LP2 Current

IDDLP2

One PMU channel enabled Each additional PMU channel

LP1 Current LP0 Current LP2 Mode Resume Time

IDDLP1 IDDLP0 tONLP2

RTC enabled, VDD supply current RTC disabled, VDD supply current RTC enabled, VDD supply current RTC disabled, VDD supply current One PMU channel active
Ordering Information

PART

TEMP RANGE PIN-PACKAGE

MAX32600-P85A+ -40°C to +85°C 192 CTBGA

MAX32600-P85B+ -40°C to +85°C 192 CTBGA

MAX32600-J85A+ -40°C to +85°C 120 CTBGA

MAX32600-J85B+ -40°C to +85°C 120 CTBGA

MAX32600-W85A+ -40°C to +85°C 108 WLP

MAX32600-W85B+ -40°C to +85°C 108 WLP +Denotes a lead Pb -free/RoHS-compliant package.

Package Information

For the latest package outline information and land patterns
footprints , go to Note that a “+”, “#”, or “-” in the package code indicates RoHS status
only. Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.

PACKAGE TYPE

PACKAGE CODE

OUTLINE NO.

LAND PATTERN
192 CTBGA X19222+1C 21-0712
120 CTBGA X12077+1C 21-0899
108 WLP W1084A5+1 21-1075

Selector Table

PART

FLASH KB

MAX32600-P85A+

MAX32600-P85B+

MAX32600-J85A+

MAX32600-J85B+

MAX32600-W85A+

MAX32600-W85B+

SRAM KB

ADC CHANNELS
16 x 1, 8 x 2 16 x 1, 8 x 2 12 x 1, 6 x 2 12 x 1, 6 x 2 6 x 1, 3 x 2 6 x 1, 3 x 2

TRUST PROTECTION

UNIT TPU No Yes No Yes No Yes
160-segment 160-segment

No LCD No LCD No LCD No LCD

PIN-PACKAGE
12mm x 12mm CTBGA 12mm x 12mm CTBGA 7mm x 7mm CTBGA 7mm x 7mm CTBGA 5.4mm x 4.3mm WLP 5.4mm x 4.3mm WLP

Package/Feature Details

LCD GPIO 8-bit ports
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2016 Maxim Integrated Products, Inc. 35

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX32600-P85B+W Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX32600-P85B+W 647295