MAX16910CATA9/V+C3

MAX16910CATA9/V+C3 Datasheet

MAX16910

Part	Datasheet
MAX16910CATA9/V+C3	MAX16910CATA9/V+C3 (pdf)

PDF Datasheet Preview
MAX16910 EVALUATION KIT AVAILABLE 200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator The MAX16910 ultra-low quiescent current, high-voltage linear regulator is ideal for use in automotive and batteryoperated systems. The device operates from a +3.5V to +30V input voltage, delivers up to 200mA of load current, and consumes only 20µA of quiescent current at no load. The device consumes only 1.6uA current when in shutdown. The input is +45V transient tolerant and is designed to operate under load-dump conditions. The MAX16910 can be configured as either fixed output voltage +3.3V or +5V or adjustable output voltage using an external resistive divider. The MAX16910 features an open-drain, active-low RESET output with fixed thresholds offered at and of the output voltage. The RESET output remains low for a fixed period of 60µs after the output voltage exceeds its threshold. The RESET delay can be extended with an external capacitor. The MAX16910 includes an enable input, shortcircuit protection, and thermal shutdown. The MAX16910 operates over the -40°C to +125°C automotive temperature range. The device is available in a space-saving, thermally enhanced, 3mm x 3mm, 8-pin TDFN package and 5mm x 4mm, 8-pin SO package. ●● Automotive ●● Industrial ●● Telecom Ordering Information/Selector Guide appears at end of data sheet. Benefits and Features ●● Enables System Designers to Meet Stringent Module Requirements for 100uA Quiescent Current • Low 20µA Quiescent Current • Up to 200mA Output-Current Capability • User-Selectable Output Voltage +3.3V or +5V Fixed and +1.5V to +11V Adjustable with External Resistive Divider ●● Tiny Output Capacitors Reduce Board Space and BOM Cost • Stable Operation with 4.7µF Output Capacitor ●● Accurate RESET Output with Adjustable Delay Eliminates Need for Separate Reset IC • Open-Drain RESET Output with Adjustable Delay • Fixed-Reset Threshold Options or ●● Operates Through Cold-Crank Conditions • Low-Dropout Voltage of 280mV at 200mA • +3.5V to +30V Wide Input Voltage Range, +45V Tolerant ●● Robust Performance in Automotive Environment • Thermal and Short-Circuit Protection • High-Voltage Enable Input +45V • Operating -40°C to +125°C Temperature Range • Automotive Qualified Typical Operating Circuits 5V FIXED OUTPUT 1µF ENABLE SETOV + 14V MAX16910 4.7µF 10kI - BATTERY RESET RESET GND TIMEOUT 1nF 1.25ms DELAY Typical Operating Circuits continued on next page. MAX16910 200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator Typical Operating Circuits continued 1µF + 14V - BATTERY 3.3V FIXED OUTPUT ENABLE MAX16910 SETOV RESET 4.7µF 10kI RESET GND TIMEOUT Ordering Information/Selector Guide PART RESET THRESHOLD MAX16910CATA8/V+ MAX16910CATA9/V+ MAX16910CASA8/V+ MAX16910CASA9/V+ MAX16910CATA8+ MAX16910CATA9+ MAX16910CASA8+ MAX16910CASA9+ MAX16910DATA8/V+ MAX16910DATA9/V+ MAX16910DASA8/V+ MAX16910DASA9/V+ +Denotes a lead Pb -free/RoHS-compliant package. /V denotes an automotive qualified part. EP = Exposed pad. Future factory for availability. 200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator PIN-PACKAGE 8 TDFN-EP 3mm x 3mm 8 TDFN-EP* 3mm x 3mm 8 SO-EP* 5mm x 4mm 8 SO-EP* 5mm x 4mm 8 TDFN-EP* 3mm x 3mm 8 TDFN-EP* 3mm x 3mm 8 SO-EP* 5mm x 4mm 8 SO-EP* 5mm x 4mm 8 TDFN-EP* 3mm x 3mm 8 TDFN-EP* 3mm x 3mm 8 SO-EP* 5mm x 4mm 8 SO-EP* 5mm x 4mm TOP MARK +BLW +BLV +BOW +BOV +BRY +BRZ Chip Information PROCESS BiCMOS DMOS Package Information For the latest package outline information and land patterns, go to Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE 8 TDFN-EP 8 SO-EP PACKAGE CODE T833+2 S8E+12 OUTLINE NO. 21-0137 21-0111 LAND PATTERN NO. 90-0059 90-0150 Maxim Integrated 14 MAX16910 200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator 2 3 4 5 6 7 7/09 Initial release 10/10 Added a junction temperature range of -40°C to +150°C in the Features section, updated Electrical Characteristics table with +150°C junction temperature in “5V Output Voltage,” “3.3V Output Voltage,” and “Dropout Voltage” parameters, added new Note 4, updated TOC 10 and Figure 1 7/11 4/12 6/14 10/14 8/15 5/17 Updated Fixed Output-Voltage Mode section and added four new MAX16910D variants in Ordering Information table PAGES CHANGED 1, 4, 5, 6, 8, 13 4 1,14 4 1 11, 14 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2017 Maxim Integrated Products, Inc. 15

PDF Datasheet Preview

MAX16910

EVALUATION KIT AVAILABLE
200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator

The MAX16910 ultra-low quiescent current, high-voltage linear regulator is ideal for use in automotive and batteryoperated systems. The device operates from a +3.5V to +30V input voltage, delivers up to 200mA of load current, and consumes only 20µA of quiescent current at no load. The device consumes only 1.6uA current when in shutdown. The input is +45V transient tolerant and is designed to operate under load-dump conditions. The MAX16910 can be configured as either fixed output voltage +3.3V or +5V or adjustable output voltage using an external resistive divider.

The MAX16910 features an open-drain, active-low RESET output with fixed thresholds offered at and of the output voltage. The RESET output remains low for a fixed period of 60µs after the output voltage exceeds its threshold. The RESET delay can be extended with an external capacitor.

The MAX16910 includes an enable input, shortcircuit protection, and thermal shutdown. The MAX16910 operates over the -40°C to +125°C automotive temperature range. The device is available in a space-saving, thermally enhanced, 3mm x 3mm, 8-pin TDFN package and 5mm x 4mm, 8-pin SO package.
●● Automotive ●● Industrial ●● Telecom
Ordering Information/Selector Guide appears at end of data sheet.

Benefits and Features
●● Enables System Designers to Meet Stringent Module Requirements for 100uA Quiescent Current
• Low 20µA Quiescent Current
• Up to 200mA Output-Current Capability
• User-Selectable Output Voltage +3.3V or +5V

Fixed and +1.5V to +11V Adjustable with External Resistive Divider
●● Tiny Output Capacitors Reduce Board Space and BOM Cost
• Stable Operation with 4.7µF Output Capacitor
●● Accurate RESET Output with Adjustable Delay Eliminates Need for Separate Reset IC
• Open-Drain RESET Output with Adjustable Delay
• Fixed-Reset Threshold Options or
●● Operates Through Cold-Crank Conditions
• Low-Dropout Voltage of 280mV at 200mA
• +3.5V to +30V Wide Input Voltage Range,
+45V Tolerant
●● Robust Performance in Automotive Environment
• Thermal and Short-Circuit Protection
• High-Voltage Enable Input +45V
• Operating -40°C to +125°C Temperature Range
• Automotive Qualified

Typical Operating Circuits
5V FIXED OUTPUT
1µF

ENABLE

SETOV
+ 14V

MAX16910
4.7µF
10kI
- BATTERY

RESET

RESET

GND TIMEOUT
1nF 1.25ms DELAY

Typical Operating Circuits continued on next page.

MAX16910
200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator

Typical Operating Circuits continued
1µF
+ 14V - BATTERY
3.3V FIXED OUTPUT

ENABLE MAX16910

SETOV RESET
4.7µF
10kI

RESET

GND TIMEOUT
Ordering Information/Selector Guide

PART

RESET THRESHOLD

MAX16910CATA8/V+

MAX16910CATA9/V+

MAX16910CASA8/V+

MAX16910CASA9/V+

MAX16910CATA8+

MAX16910CATA9+

MAX16910CASA8+

MAX16910CASA9+

MAX16910DATA8/V+

MAX16910DATA9/V+

MAX16910DASA8/V+

MAX16910DASA9/V+
+Denotes a lead Pb -free/RoHS-compliant package. /V denotes an automotive qualified part. *EP = Exposed pad. **Future factory for availability.
200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator

PIN-PACKAGE 8 TDFN-EP* 3mm x 3mm 8 TDFN-EP* 3mm x 3mm
8 SO-EP* 5mm x 4mm 8 SO-EP* 5mm x 4mm 8 TDFN-EP* 3mm x 3mm 8 TDFN-EP* 3mm x 3mm 8 SO-EP* 5mm x 4mm 8 SO-EP* 5mm x 4mm 8 TDFN-EP* 3mm x 3mm 8 TDFN-EP* 3mm x 3mm 8 SO-EP* 5mm x 4mm 8 SO-EP* 5mm x 4mm

TOP MARK +BLW +BLV +BOW +BOV +BRY +BRZ

Chip Information

PROCESS BiCMOS DMOS

Package Information

For the latest package outline information and land patterns, go to Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.

PACKAGE TYPE
8 TDFN-EP 8 SO-EP

PACKAGE CODE

T833+2 S8E+12

OUTLINE NO.
21-0137 21-0111

LAND PATTERN NO.
90-0059 90-0150

Maxim Integrated 14

MAX16910
200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator
2 3 4 5 6 7
7/09

Initial release
10/10

Added a junction temperature range of -40°C to +150°C in the Features section, updated Electrical Characteristics table with +150°C junction temperature in “5V Output Voltage,” “3.3V Output Voltage,” and “Dropout Voltage” parameters, added new Note 4, updated TOC 10 and Figure 1
7/11 4/12 6/14 10/14 8/15 5/17
Updated Fixed Output-Voltage Mode section and added four new MAX16910D variants in Ordering Information table

PAGES CHANGED
1, 4, 5, 6, 8, 13
4 1,14
4 1 11, 14
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2017 Maxim Integrated Products, Inc. 15

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX16910CATA9/V+C3 Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX16910CATA9/V+C3 647253